1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Can't access bad certificate site

Discussion in 'Internet Explorer' started by SteveH, Jun 14, 2010.

  1. SteveH

    SteveH Flightless Bird

    Hello

    I am trying to access a https:// site. In Safari it always gives me a
    certificate error but I can still get to it.

    I cannot access it at all from IE 8 and wonder why that might be. What
    settings do I need to check, please?

    Thanks.

    Steve
     
  2. Dan

    Dan Flightless Bird

    "SteveH" <SteveH@discussions.microsoft.com> wrote in message
    news:73B6AF28-5A6E-4C4B-8EEF-F022D871F859@microsoft.com...
    > Hello
    >
    > I am trying to access a https:// site. In Safari it always gives me a
    > certificate error but I can still get to it.
    >
    > I cannot access it at all from IE 8 and wonder why that might be. What
    > settings do I need to check, please?
    >
    > Thanks.
    >
    > Steve


    Have you changed any settings in IE8? Mine offers me a choice to continue on
    a "bad" certificate. What is the URL that is not working for you?

    --
    Dan
     
  3. SteveH

    SteveH Flightless Bird

    Hello Dan

    Thanks for your reply.

    No, I don't think I have changed any settings, but I did have a Trojan
    recently which took several days to remove.

    The site is: https://exp.ourcp.com:8442/

    Thanks

    Steve



    "Dan" wrote:

    >
    > "SteveH" <SteveH@discussions.microsoft.com> wrote in message
    > news:73B6AF28-5A6E-4C4B-8EEF-F022D871F859@microsoft.com...
    > > Hello
    > >
    > > I am trying to access a https:// site. In Safari it always gives me a
    > > certificate error but I can still get to it.
    > >
    > > I cannot access it at all from IE 8 and wonder why that might be. What
    > > settings do I need to check, please?
    > >
    > > Thanks.
    > >
    > > Steve

    >
    > Have you changed any settings in IE8? Mine offers me a choice to continue on
    > a "bad" certificate. What is the URL that is not working for you?
    >
    > --
    > Dan
    >
    > .
    >
     
  4. Dan

    Dan Flightless Bird

    Just tried that URL, my IE8 pops up page saying there is a problem with the
    certificate. If I click Continue it loads the site, the root cert is not a
    default trusted one from IE8 which is normal for a self issued cert.

    Have you reset IE at all? Tools > Internet Options > Advanced tab, button at
    the lower right. It will erase all autocomplete entries too though.

    Dan


    "SteveH" <SteveH@discussions.microsoft.com> wrote in message
    news:AD70EF74-1D6A-47B6-A821-307A0A6BE9AB@microsoft.com...
    > Hello Dan
    >
    > Thanks for your reply.
    >
    > No, I don't think I have changed any settings, but I did have a Trojan
    > recently which took several days to remove.
    >
    > The site is: https://exp.ourcp.com:8442/
    >
    > Thanks
    >
    > Steve
    >
    >
    >
    > "Dan" wrote:
    >
    >>
    >> "SteveH" <SteveH@discussions.microsoft.com> wrote in message
    >> news:73B6AF28-5A6E-4C4B-8EEF-F022D871F859@microsoft.com...
    >> > Hello
    >> >
    >> > I am trying to access a https:// site. In Safari it always gives me a
    >> > certificate error but I can still get to it.
    >> >
    >> > I cannot access it at all from IE 8 and wonder why that might be. What
    >> > settings do I need to check, please?
    >> >
    >> > Thanks.
    >> >
    >> > Steve

    >>
    >> Have you changed any settings in IE8? Mine offers me a choice to continue
    >> on
    >> a "bad" certificate. What is the URL that is not working for you?
    >>
    >> --
    >> Dan
    >>
    >> .
    >>
     
  5. PA Bear [MS MVP]

    PA Bear [MS MVP] Flightless Bird

    Windows version is...?

    What anti-virus application or security suite is installed, is your
    subscription current, and is it working properly now? What anti-spyware
    applications (other than Defender)? What third-party firewall (if any)?

    Has a(another) Norton or McAfee application ever been installed on the
    computer (e.g., a free-trial version that came preinstalled when you bought
    it)?

    Why is IE attempting to access the site via Port 8442?


    SteveH wrote:
    > No, I don't think I have changed any settings, but I did have a Trojan
    > recently which took several days to remove.
    >
    > The site is: XXXX://exp.ourcp.com:8442/
    >
    >> Have you changed any settings in IE8? Mine offers me a choice to continue
    >> on a "bad" certificate. What is the URL that is not working for you?
    >>
    >>> I am trying to access a https:// site. In Safari it always gives me a
    >>> certificate error but I can still get to it.
    >>>
    >>> I cannot access it at all from IE 8 and wonder why that might be. What
    >>> settings do I need to check, please?
     
  6. Rob

    Rob Flightless Bird

    PA Bear [MS MVP] <PABearMVP@gmail.com> wrote:
    > Why is IE attempting to access the site via Port 8442?


    Because there is a :8442 in the URL.
     
  7. Dan

    Dan Flightless Bird

    It's possible that your trojan removal has broken something in IE. Did you
    try the reset?

    Also, you might want to check the group policy settings to see if anything
    has been changed, for instance:

    1.Start the Group Policy tool (GPEdit.msc).
    2.Expand the policy structure using the following path: Computer
    Configuration\Administrative Templates\Windows Components\Internet
    Explorer\Internet Control Panel.
    3.Double-click the Prevent ignoring certificate errors setting.
    4.If it's Enabled, then set to Disabled.

    This GP setting will, if set to Enabled, stop IE from showing the warning
    page, it'll just simply not allow you to access the site.


    However, I doubt it's this. Can you give any more details as to what "I
    cannot access it from IE" actually means? Do you see any messages at all?
    Can you get Fiddler2 and run a trace to see if IE even attempts to access
    the URL? It's possible you still have parts of that trojan kicking around,
    maybe a proxy that IE is forced to use that prevents accessing a
    non-standard SSL port to prevent circumvention.

    Dan




    "SteveH" <SteveH@discussions.microsoft.com> wrote in message
    news:AD70EF74-1D6A-47B6-A821-307A0A6BE9AB@microsoft.com...
    > Hello Dan
    >
    > Thanks for your reply.
    >
    > No, I don't think I have changed any settings, but I did have a Trojan
    > recently which took several days to remove.
    >
    > The site is: https://exp.ourcp.com:8442/
    >
    > Thanks
    >
    > Steve
    >
    >
    >
    > "Dan" wrote:
    >
    >>
    >> "SteveH" <SteveH@discussions.microsoft.com> wrote in message
    >> news:73B6AF28-5A6E-4C4B-8EEF-F022D871F859@microsoft.com...
    >> > Hello
    >> >
    >> > I am trying to access a https:// site. In Safari it always gives me a
    >> > certificate error but I can still get to it.
    >> >
    >> > I cannot access it at all from IE 8 and wonder why that might be. What
    >> > settings do I need to check, please?
    >> >
    >> > Thanks.
    >> >
    >> > Steve

    >>
    >> Have you changed any settings in IE8? Mine offers me a choice to continue
    >> on
    >> a "bad" certificate. What is the URL that is not working for you?
    >>
    >> --
    >> Dan
    >>
    >> .
    >>
     
  8. SteveH

    SteveH Flightless Bird

    Hello PA Bear

    Using XP Pro. I don't think Norton/McAfee has been installed; Sophos has and
    now I have Avast. I use an windows firewall only. All updates are current.
    When that site loads successfully, it shows me the log-on page to a server.

    Steve

    "PA Bear [MS MVP]" wrote:

    > Windows version is...?
    >
    > What anti-virus application or security suite is installed, is your
    > subscription current, and is it working properly now? What anti-spyware
    > applications (other than Defender)? What third-party firewall (if any)?
    >
    > Has a(another) Norton or McAfee application ever been installed on the
    > computer (e.g., a free-trial version that came preinstalled when you bought
    > it)?
    >
    > Why is IE attempting to access the site via Port 8442?
    >
    >
    > SteveH wrote:
    > > No, I don't think I have changed any settings, but I did have a Trojan
    > > recently which took several days to remove.
    > >
    > > The site is: XXXX://exp.ourcp.com:8442/
    > >
    > >> Have you changed any settings in IE8? Mine offers me a choice to continue
    > >> on a "bad" certificate. What is the URL that is not working for you?
    > >>
    > >>> I am trying to access a https:// site. In Safari it always gives me a
    > >>> certificate error but I can still get to it.
    > >>>
    > >>> I cannot access it at all from IE 8 and wonder why that might be. What
    > >>> settings do I need to check, please?

    >
    > .
    >
     
  9. SteveH

    SteveH Flightless Bird

    Hello Dan

    I have reset the browser, but that didn't work. That is what I get:

    Internet Explorer cannot display the webpage

    What you can try

    Diagnose Connection Problems

    More information

    When I click 'Diagnose Connection problems', a dialogue box tells me that
    Windows did not detect any problems with the connection. And in the log:

    Last diagnostic run time: 06/16/10 09:37:38 HTTP, HTTPS, FTP Diagnostic
    HTTP, HTTPS, FTP connectivity

    info FTP (Passive): Successfully connected to ftp.microsoft.com.
    info HTTP: Successfully connected to www.microsoft.com.
    info HTTPS: Successfully connected to www.microsoft.com.

    I have also looked at Group Policy - it is not configured.

    What I have noticed is that since the Trojan (I believe it has gone), I am
    unable to connect to the Internet by clicking on the IE logo (that has gone).
    What I have to do it open a saved IE HTML file and type in the URL I want to
    visit in the address bar.

    I'll try to get Fiddler2 (but I have not heard of that one).

    Thanks again, Dan.

    Steve



    "Dan" wrote:

    > It's possible that your trojan removal has broken something in IE. Did you
    > try the reset?
    >
    > Also, you might want to check the group policy settings to see if anything
    > has been changed, for instance:
    >
    > 1.Start the Group Policy tool (GPEdit.msc).
    > 2.Expand the policy structure using the following path: Computer
    > Configuration\Administrative Templates\Windows Components\Internet
    > Explorer\Internet Control Panel.
    > 3.Double-click the Prevent ignoring certificate errors setting.
    > 4.If it's Enabled, then set to Disabled.
    >
    > This GP setting will, if set to Enabled, stop IE from showing the warning
    > page, it'll just simply not allow you to access the site.
    >
    >
    > However, I doubt it's this. Can you give any more details as to what "I
    > cannot access it from IE" actually means? Do you see any messages at all?
    > Can you get Fiddler2 and run a trace to see if IE even attempts to access
    > the URL? It's possible you still have parts of that trojan kicking around,
    > maybe a proxy that IE is forced to use that prevents accessing a
    > non-standard SSL port to prevent circumvention.
    >
    > Dan
    >
    >
    >
    >
    > "SteveH" <SteveH@discussions.microsoft.com> wrote in message
    > news:AD70EF74-1D6A-47B6-A821-307A0A6BE9AB@microsoft.com...
    > > Hello Dan
    > >
    > > Thanks for your reply.
    > >
    > > No, I don't think I have changed any settings, but I did have a Trojan
    > > recently which took several days to remove.
    > >
    > > The site is: https://exp.ourcp.com:8442/
    > >
    > > Thanks
    > >
    > > Steve
    > >
    > >
    > >
    > > "Dan" wrote:
    > >
    > >>
    > >> "SteveH" <SteveH@discussions.microsoft.com> wrote in message
    > >> news:73B6AF28-5A6E-4C4B-8EEF-F022D871F859@microsoft.com...
    > >> > Hello
    > >> >
    > >> > I am trying to access a https:// site. In Safari it always gives me a
    > >> > certificate error but I can still get to it.
    > >> >
    > >> > I cannot access it at all from IE 8 and wonder why that might be. What
    > >> > settings do I need to check, please?
    > >> >
    > >> > Thanks.
    > >> >
    > >> > Steve
    > >>
    > >> Have you changed any settings in IE8? Mine offers me a choice to continue
    > >> on
    > >> a "bad" certificate. What is the URL that is not working for you?
    > >>
    > >> --
    > >> Dan
    > >>
    > >> .
    > >>

    >
    >
    >
    > .
    >
     
  10. Dan

    Dan Flightless Bird

    "SteveH" <SteveH@discussions.microsoft.com> wrote in message
    news:9495549F-A1A2-4DA9-8CEF-2AF6B547FC72@microsoft.com...
    > Hello Dan
    >
    > I have reset the browser, but that didn't work. That is what I get:
    >
    > Internet Explorer cannot display the webpage
    >
    > What you can try
    >
    > Diagnose Connection Problems
    >
    > More information
    >
    > When I click 'Diagnose Connection problems', a dialogue box tells me that
    > Windows did not detect any problems with the connection. And in the log:
    >
    > Last diagnostic run time: 06/16/10 09:37:38 HTTP, HTTPS, FTP Diagnostic
    > HTTP, HTTPS, FTP connectivity
    >
    > info FTP (Passive): Successfully connected to ftp.microsoft.com.
    > info HTTP: Successfully connected to www.microsoft.com.
    > info HTTPS: Successfully connected to www.microsoft.com.
    >
    > I have also looked at Group Policy - it is not configured.
    >
    > What I have noticed is that since the Trojan (I believe it has gone), I am
    > unable to connect to the Internet by clicking on the IE logo (that has
    > gone).
    > What I have to do it open a saved IE HTML file and type in the URL I want
    > to
    > visit in the address bar.


    In that case something is still broken. Have you tried repairing IE from
    Add/Remove Programs?

    As to the diagnotic test, note that it only tests outgoing connections on
    the standard HTTP, HTTPS and FTP ports.

    I'd also check to see if a router/firewall configuration has been adjusted
    to block access to that non-standard port number.

    > I'll try to get Fiddler2 (but I have not heard of that one).


    http://www.fiddler2.com/fiddler2/

    It's a debugging tool for viewing HTTP and HTTPS exchanges, very handy for
    tracing problems with requests from browsers.

    Dan

    > Thanks again, Dan.
    >
    > Steve
    >
    >
    >
    > "Dan" wrote:
    >
    >> It's possible that your trojan removal has broken something in IE. Did
    >> you
    >> try the reset?
    >>
    >> Also, you might want to check the group policy settings to see if
    >> anything
    >> has been changed, for instance:
    >>
    >> 1.Start the Group Policy tool (GPEdit.msc).
    >> 2.Expand the policy structure using the following path: Computer
    >> Configuration\Administrative Templates\Windows Components\Internet
    >> Explorer\Internet Control Panel.
    >> 3.Double-click the Prevent ignoring certificate errors setting.
    >> 4.If it's Enabled, then set to Disabled.
    >>
    >> This GP setting will, if set to Enabled, stop IE from showing the warning
    >> page, it'll just simply not allow you to access the site.
    >>
    >>
    >> However, I doubt it's this. Can you give any more details as to what "I
    >> cannot access it from IE" actually means? Do you see any messages at all?
    >> Can you get Fiddler2 and run a trace to see if IE even attempts to access
    >> the URL? It's possible you still have parts of that trojan kicking
    >> around,
    >> maybe a proxy that IE is forced to use that prevents accessing a
    >> non-standard SSL port to prevent circumvention.
    >>
    >> Dan
    >>
    >>
    >>
    >>
    >> "SteveH" <SteveH@discussions.microsoft.com> wrote in message
    >> news:AD70EF74-1D6A-47B6-A821-307A0A6BE9AB@microsoft.com...
    >> > Hello Dan
    >> >
    >> > Thanks for your reply.
    >> >
    >> > No, I don't think I have changed any settings, but I did have a Trojan
    >> > recently which took several days to remove.
    >> >
    >> > The site is: https://exp.ourcp.com:8442/
    >> >
    >> > Thanks
    >> >
    >> > Steve
    >> >
    >> >
    >> >
    >> > "Dan" wrote:
    >> >
    >> >>
    >> >> "SteveH" <SteveH@discussions.microsoft.com> wrote in message
    >> >> news:73B6AF28-5A6E-4C4B-8EEF-F022D871F859@microsoft.com...
    >> >> > Hello
    >> >> >
    >> >> > I am trying to access a https:// site. In Safari it always gives me
    >> >> > a
    >> >> > certificate error but I can still get to it.
    >> >> >
    >> >> > I cannot access it at all from IE 8 and wonder why that might be.
    >> >> > What
    >> >> > settings do I need to check, please?
    >> >> >
    >> >> > Thanks.
    >> >> >
    >> >> > Steve
    >> >>
    >> >> Have you changed any settings in IE8? Mine offers me a choice to
    >> >> continue
    >> >> on
    >> >> a "bad" certificate. What is the URL that is not working for you?
    >> >>
    >> >> --
    >> >> Dan
    >> >>
    >> >> .
    >> >>

    >>
    >>
    >>
    >> .
    >>
     
  11. SteveH

    SteveH Flightless Bird

    Hello Dan

    This is what I get in Fiddler:

    Request Count: 1
    Bytes Sent: 217
    Bytes Received: 636

    ACTUAL PERFORMANCE
    --------------
    ClientConnected: 12:37:45.718
    ClientBeginRequest: 12:37:45.890
    ClientDoneRequest: 12:37:45.937
    Gateway Determination: 3109ms
    DNS Lookup: 0ms
    TCP/IP Connect: 1ms
    ServerConnected: 12:37:49.156
    FiddlerBeginRequest: 12:37:49.156
    ServerGotRequest: 12:37:49.187
    ServerBeginResponse: 12:37:49.500
    ServerDoneResponse: 12:37:49.500
    ClientBeginResponse: 12:37:49.515
    ClientDoneResponse: 12:37:49.531

    Overall Elapsed: 00:00:03.6406250

    RESPONSE CODES
    --------------
    HTTP/200: 1

    RESPONSE BYTES (by Content-Type)
    --------------
    ~headers: 331
    text/plain: 305

    ESTIMATED WORLDWIDE PERFORMANCE
    --------------
    The following are VERY rough estimates of download times when hitting
    servers based in WA, USA.


    US West Coast (Modem - 6KB/sec)
    ---------------
    Round trip cost: 0.10s
    Elapsed Time: 0.10s


    Japan / Northern Europe (Modem)
    ---------------
    Round trip cost: 0.15s
    Elapsed Time: 0.15s


    China (Modem)
    ---------------
    Round trip cost: 0.45s
    Elapsed Time: 0.45s


    US West Coast (DSL - 30KB/sec)
    ---------------
    Round trip cost: 0.10s
    Elapsed Time: 0.10s


    Japan / Northern Europe (DSL)
    ---------------
    Round trip cost: 0.15s
    Elapsed Time: 0.15s


    China (DSL)
    ---------------
    Round trip cost: 0.45s
    Elapsed Time: 0.45s


    ================
    Learn more about HTTP performance at
    http://www.fiddler2.com/redir/?id=HTTPPERF

    I also removed IE in Add/Remove (it showed that my last IE activity was
    sometime in May - not true, I posted here yesterday in IE).

    Then downloaded it again, restarted PC, installed, restarted again, and in
    Add/Remove I see IE there installed whith the date f my last IE activity -
    same date in May!!

    Steve

    "Dan" wrote:

    >
    > "SteveH" <SteveH@discussions.microsoft.com> wrote in message
    > news:9495549F-A1A2-4DA9-8CEF-2AF6B547FC72@microsoft.com...
    > > Hello Dan
    > >
    > > I have reset the browser, but that didn't work. That is what I get:
    > >
    > > Internet Explorer cannot display the webpage
    > >
    > > What you can try
    > >
    > > Diagnose Connection Problems
    > >
    > > More information
    > >
    > > When I click 'Diagnose Connection problems', a dialogue box tells me that
    > > Windows did not detect any problems with the connection. And in the log:
    > >
    > > Last diagnostic run time: 06/16/10 09:37:38 HTTP, HTTPS, FTP Diagnostic
    > > HTTP, HTTPS, FTP connectivity
    > >
    > > info FTP (Passive): Successfully connected to ftp.microsoft.com.
    > > info HTTP: Successfully connected to www.microsoft.com.
    > > info HTTPS: Successfully connected to www.microsoft.com.
    > >
    > > I have also looked at Group Policy - it is not configured.
    > >
    > > What I have noticed is that since the Trojan (I believe it has gone), I am
    > > unable to connect to the Internet by clicking on the IE logo (that has
    > > gone).
    > > What I have to do it open a saved IE HTML file and type in the URL I want
    > > to
    > > visit in the address bar.

    >
    > In that case something is still broken. Have you tried repairing IE from
    > Add/Remove Programs?
    >
    > As to the diagnotic test, note that it only tests outgoing connections on
    > the standard HTTP, HTTPS and FTP ports.
    >
    > I'd also check to see if a router/firewall configuration has been adjusted
    > to block access to that non-standard port number.
    >
    > > I'll try to get Fiddler2 (but I have not heard of that one).

    >
    > http://www.fiddler2.com/fiddler2/
    >
    > It's a debugging tool for viewing HTTP and HTTPS exchanges, very handy for
    > tracing problems with requests from browsers.
    >
    > Dan
    >
    > > Thanks again, Dan.
    > >
    > > Steve
    > >
    > >
    > >
    > > "Dan" wrote:
    > >
    > >> It's possible that your trojan removal has broken something in IE. Did
    > >> you
    > >> try the reset?
    > >>
    > >> Also, you might want to check the group policy settings to see if
    > >> anything
    > >> has been changed, for instance:
    > >>
    > >> 1.Start the Group Policy tool (GPEdit.msc).
    > >> 2.Expand the policy structure using the following path: Computer
    > >> Configuration\Administrative Templates\Windows Components\Internet
    > >> Explorer\Internet Control Panel.
    > >> 3.Double-click the Prevent ignoring certificate errors setting.
    > >> 4.If it's Enabled, then set to Disabled.
    > >>
    > >> This GP setting will, if set to Enabled, stop IE from showing the warning
    > >> page, it'll just simply not allow you to access the site.
    > >>
    > >>
    > >> However, I doubt it's this. Can you give any more details as to what "I
    > >> cannot access it from IE" actually means? Do you see any messages at all?
    > >> Can you get Fiddler2 and run a trace to see if IE even attempts to access
    > >> the URL? It's possible you still have parts of that trojan kicking
    > >> around,
    > >> maybe a proxy that IE is forced to use that prevents accessing a
    > >> non-standard SSL port to prevent circumvention.
    > >>
    > >> Dan
    > >>
    > >>
    > >>
    > >>
    > >> "SteveH" <SteveH@discussions.microsoft.com> wrote in message
    > >> news:AD70EF74-1D6A-47B6-A821-307A0A6BE9AB@microsoft.com...
    > >> > Hello Dan
    > >> >
    > >> > Thanks for your reply.
    > >> >
    > >> > No, I don't think I have changed any settings, but I did have a Trojan
    > >> > recently which took several days to remove.
    > >> >
    > >> > The site is: https://exp.ourcp.com:8442/
    > >> >
    > >> > Thanks
    > >> >
    > >> > Steve
    > >> >
    > >> >
    > >> >
    > >> > "Dan" wrote:
    > >> >
    > >> >>
    > >> >> "SteveH" <SteveH@discussions.microsoft.com> wrote in message
    > >> >> news:73B6AF28-5A6E-4C4B-8EEF-F022D871F859@microsoft.com...
    > >> >> > Hello
    > >> >> >
    > >> >> > I am trying to access a https:// site. In Safari it always gives me
    > >> >> > a
    > >> >> > certificate error but I can still get to it.
    > >> >> >
    > >> >> > I cannot access it at all from IE 8 and wonder why that might be.
    > >> >> > What
    > >> >> > settings do I need to check, please?
    > >> >> >
    > >> >> > Thanks.
    > >> >> >
    > >> >> > Steve
    > >> >>
    > >> >> Have you changed any settings in IE8? Mine offers me a choice to
    > >> >> continue
    > >> >> on
    > >> >> a "bad" certificate. What is the URL that is not working for you?
    > >> >>
    > >> >> --
    > >> >> Dan
    > >> >>
    > >> >> .
    > >> >>
    > >>
    > >>
    > >>
    > >> .
    > >>

    >
    >
    >
    > .
    >
     
  12. Dan

    Dan Flightless Bird

    "SteveH" <SteveH@discussions.microsoft.com> wrote in message
    news:1CF32253-8433-4C32-A53D-0EE3A0F83E0C@microsoft.com...
    > Hello Dan
    >
    > This is what I get in Fiddler:
    >


    That is all useless for this. You need to start it up, try to connect, and
    view the URLs in the left pane. Then use the session inspector tabs to see
    what is being passed back and forth. If you don't see the return data with
    the login form then something is blocking outgoing access to that port
    number.

    What you posted is a performance test - that's nothing to do with HTTP
    tracing, it's just a simple test for connectivity.

    > I also removed IE in Add/Remove (it showed that my last IE activity was
    > sometime in May - not true, I posted here yesterday in IE).
    >
    > Then downloaded it again, restarted PC, installed, restarted again, and in
    > Add/Remove I see IE there installed whith the date f my last IE activity -
    > same date in May!!


    Don't uninstall/reinstall.

    Dan

    > Steve
    >
    > "Dan" wrote:
    >
    >>
    >> "SteveH" <SteveH@discussions.microsoft.com> wrote in message
    >> news:9495549F-A1A2-4DA9-8CEF-2AF6B547FC72@microsoft.com...
    >> > Hello Dan
    >> >
    >> > I have reset the browser, but that didn't work. That is what I get:
    >> >
    >> > Internet Explorer cannot display the webpage
    >> >
    >> > What you can try
    >> >
    >> > Diagnose Connection Problems
    >> >
    >> > More information
    >> >
    >> > When I click 'Diagnose Connection problems', a dialogue box tells me
    >> > that
    >> > Windows did not detect any problems with the connection. And in the
    >> > log:
    >> >
    >> > Last diagnostic run time: 06/16/10 09:37:38 HTTP, HTTPS, FTP Diagnostic
    >> > HTTP, HTTPS, FTP connectivity
    >> >
    >> > info FTP (Passive): Successfully connected to ftp.microsoft.com.
    >> > info HTTP: Successfully connected to www.microsoft.com.
    >> > info HTTPS: Successfully connected to www.microsoft.com.
    >> >
    >> > I have also looked at Group Policy - it is not configured.
    >> >
    >> > What I have noticed is that since the Trojan (I believe it has gone), I
    >> > am
    >> > unable to connect to the Internet by clicking on the IE logo (that has
    >> > gone).
    >> > What I have to do it open a saved IE HTML file and type in the URL I
    >> > want
    >> > to
    >> > visit in the address bar.

    >>
    >> In that case something is still broken. Have you tried repairing IE from
    >> Add/Remove Programs?
    >>
    >> As to the diagnotic test, note that it only tests outgoing connections on
    >> the standard HTTP, HTTPS and FTP ports.
    >>
    >> I'd also check to see if a router/firewall configuration has been
    >> adjusted
    >> to block access to that non-standard port number.
    >>
    >> > I'll try to get Fiddler2 (but I have not heard of that one).

    >>
    >> http://www.fiddler2.com/fiddler2/
    >>
    >> It's a debugging tool for viewing HTTP and HTTPS exchanges, very handy
    >> for
    >> tracing problems with requests from browsers.
    >>
    >> Dan
    >>
    >> > Thanks again, Dan.
    >> >
    >> > Steve
    >> >
    >> >
    >> >
    >> > "Dan" wrote:
    >> >
    >> >> It's possible that your trojan removal has broken something in IE. Did
    >> >> you
    >> >> try the reset?
    >> >>
    >> >> Also, you might want to check the group policy settings to see if
    >> >> anything
    >> >> has been changed, for instance:
    >> >>
    >> >> 1.Start the Group Policy tool (GPEdit.msc).
    >> >> 2.Expand the policy structure using the following path: Computer
    >> >> Configuration\Administrative Templates\Windows Components\Internet
    >> >> Explorer\Internet Control Panel.
    >> >> 3.Double-click the Prevent ignoring certificate errors setting.
    >> >> 4.If it's Enabled, then set to Disabled.
    >> >>
    >> >> This GP setting will, if set to Enabled, stop IE from showing the
    >> >> warning
    >> >> page, it'll just simply not allow you to access the site.
    >> >>
    >> >>
    >> >> However, I doubt it's this. Can you give any more details as to what
    >> >> "I
    >> >> cannot access it from IE" actually means? Do you see any messages at
    >> >> all?
    >> >> Can you get Fiddler2 and run a trace to see if IE even attempts to
    >> >> access
    >> >> the URL? It's possible you still have parts of that trojan kicking
    >> >> around,
    >> >> maybe a proxy that IE is forced to use that prevents accessing a
    >> >> non-standard SSL port to prevent circumvention.
    >> >>
    >> >> Dan
    >> >>
    >> >>
    >> >>
    >> >>
    >> >> "SteveH" <SteveH@discussions.microsoft.com> wrote in message
    >> >> news:AD70EF74-1D6A-47B6-A821-307A0A6BE9AB@microsoft.com...
    >> >> > Hello Dan
    >> >> >
    >> >> > Thanks for your reply.
    >> >> >
    >> >> > No, I don't think I have changed any settings, but I did have a
    >> >> > Trojan
    >> >> > recently which took several days to remove.
    >> >> >
    >> >> > The site is: https://exp.ourcp.com:8442/
    >> >> >
    >> >> > Thanks
    >> >> >
    >> >> > Steve
    >> >> >
    >> >> >
    >> >> >
    >> >> > "Dan" wrote:
    >> >> >
    >> >> >>
    >> >> >> "SteveH" <SteveH@discussions.microsoft.com> wrote in message
    >> >> >> news:73B6AF28-5A6E-4C4B-8EEF-F022D871F859@microsoft.com...
    >> >> >> > Hello
    >> >> >> >
    >> >> >> > I am trying to access a https:// site. In Safari it always gives
    >> >> >> > me
    >> >> >> > a
    >> >> >> > certificate error but I can still get to it.
    >> >> >> >
    >> >> >> > I cannot access it at all from IE 8 and wonder why that might be.
    >> >> >> > What
    >> >> >> > settings do I need to check, please?
    >> >> >> >
    >> >> >> > Thanks.
    >> >> >> >
    >> >> >> > Steve
    >> >> >>
    >> >> >> Have you changed any settings in IE8? Mine offers me a choice to
    >> >> >> continue
    >> >> >> on
    >> >> >> a "bad" certificate. What is the URL that is not working for you?
    >> >> >>
    >> >> >> --
    >> >> >> Dan
    >> >> >>
    >> >> >> .
    >> >> >>
    >> >>
    >> >>
    >> >>
    >> >> .
    >> >>

    >>
    >>
    >>
    >> .
    >>
     
  13. Robert Aldwinckle

    Robert Aldwinckle Flightless Bird

    "SteveH" <SteveH@discussions.microsoft.com> wrote in message
    news:1CF32253-8433-4C32-A53D-0EE3A0F83E0C@microsoft.com...
    > Hello Dan
    >
    > This is what I get in Fiddler:



    > RESPONSE CODES
    > --------------
    > HTTP/200: 1
    >
    > RESPONSE BYTES (by Content-Type)
    > --------------
    > ~headers: 331
    > text/plain: 305



    Looks like it worked. What was the test?


    ---
     
  14. SteveH

    SteveH Flightless Bird

    Hello Dan

    Managed to get Fiddler to work:

    ACTUAL PERFORMANCE
    --------------
    ClientConnected: 08:46:44.062
    ClientBeginRequest: 08:46:44.062
    ClientDoneRequest: 08:46:44.062
    Gateway Determination: 453ms
    DNS Lookup: 0ms
    TCP/IP Connect: 2ms
    ServerConnected: 08:46:44.546
    FiddlerBeginRequest: 08:46:44.546
    ServerGotRequest: 08:46:44.546
    ServerBeginResponse: 08:46:44.562
    ServerDoneResponse: 08:46:44.578
    ClientBeginResponse: 08:46:44.578
    ClientDoneResponse: 08:46:44.578

    Overall Elapsed: 00:00:00.5156250

    Look's as if the connection is OK; it's just the actual browser, I think.

    Steve



    "Dan" wrote:

    >
    > "SteveH" <SteveH@discussions.microsoft.com> wrote in message
    > news:1CF32253-8433-4C32-A53D-0EE3A0F83E0C@microsoft.com...
    > > Hello Dan
    > >
    > > This is what I get in Fiddler:
    > >

    >
    > That is all useless for this. You need to start it up, try to connect, and
    > view the URLs in the left pane. Then use the session inspector tabs to see
    > what is being passed back and forth. If you don't see the return data with
    > the login form then something is blocking outgoing access to that port
    > number.
    >
    > What you posted is a performance test - that's nothing to do with HTTP
    > tracing, it's just a simple test for connectivity.
    >
    > > I also removed IE in Add/Remove (it showed that my last IE activity was
    > > sometime in May - not true, I posted here yesterday in IE).
    > >
    > > Then downloaded it again, restarted PC, installed, restarted again, and in
    > > Add/Remove I see IE there installed whith the date f my last IE activity -
    > > same date in May!!

    >
    > Don't uninstall/reinstall.
    >
    > Dan
    >
    > > Steve
    > >
    > > "Dan" wrote:
    > >
    > >>
    > >> "SteveH" <SteveH@discussions.microsoft.com> wrote in message
    > >> news:9495549F-A1A2-4DA9-8CEF-2AF6B547FC72@microsoft.com...
    > >> > Hello Dan
    > >> >
    > >> > I have reset the browser, but that didn't work. That is what I get:
    > >> >
    > >> > Internet Explorer cannot display the webpage
    > >> >
    > >> > What you can try
    > >> >
    > >> > Diagnose Connection Problems
    > >> >
    > >> > More information
    > >> >
    > >> > When I click 'Diagnose Connection problems', a dialogue box tells me
    > >> > that
    > >> > Windows did not detect any problems with the connection. And in the
    > >> > log:
    > >> >
    > >> > Last diagnostic run time: 06/16/10 09:37:38 HTTP, HTTPS, FTP Diagnostic
    > >> > HTTP, HTTPS, FTP connectivity
    > >> >
    > >> > info FTP (Passive): Successfully connected to ftp.microsoft.com.
    > >> > info HTTP: Successfully connected to www.microsoft.com.
    > >> > info HTTPS: Successfully connected to www.microsoft.com.
    > >> >
    > >> > I have also looked at Group Policy - it is not configured.
    > >> >
    > >> > What I have noticed is that since the Trojan (I believe it has gone), I
    > >> > am
    > >> > unable to connect to the Internet by clicking on the IE logo (that has
    > >> > gone).
    > >> > What I have to do it open a saved IE HTML file and type in the URL I
    > >> > want
    > >> > to
    > >> > visit in the address bar.
    > >>
    > >> In that case something is still broken. Have you tried repairing IE from
    > >> Add/Remove Programs?
    > >>
    > >> As to the diagnotic test, note that it only tests outgoing connections on
    > >> the standard HTTP, HTTPS and FTP ports.
    > >>
    > >> I'd also check to see if a router/firewall configuration has been
    > >> adjusted
    > >> to block access to that non-standard port number.
    > >>
    > >> > I'll try to get Fiddler2 (but I have not heard of that one).
    > >>
    > >> http://www.fiddler2.com/fiddler2/
    > >>
    > >> It's a debugging tool for viewing HTTP and HTTPS exchanges, very handy
    > >> for
    > >> tracing problems with requests from browsers.
    > >>
    > >> Dan
    > >>
    > >> > Thanks again, Dan.
    > >> >
    > >> > Steve
    > >> >
    > >> >
    > >> >
    > >> > "Dan" wrote:
    > >> >
    > >> >> It's possible that your trojan removal has broken something in IE. Did
    > >> >> you
    > >> >> try the reset?
    > >> >>
    > >> >> Also, you might want to check the group policy settings to see if
    > >> >> anything
    > >> >> has been changed, for instance:
    > >> >>
    > >> >> 1.Start the Group Policy tool (GPEdit.msc).
    > >> >> 2.Expand the policy structure using the following path: Computer
    > >> >> Configuration\Administrative Templates\Windows Components\Internet
    > >> >> Explorer\Internet Control Panel.
    > >> >> 3.Double-click the Prevent ignoring certificate errors setting.
    > >> >> 4.If it's Enabled, then set to Disabled.
    > >> >>
    > >> >> This GP setting will, if set to Enabled, stop IE from showing the
    > >> >> warning
    > >> >> page, it'll just simply not allow you to access the site.
    > >> >>
    > >> >>
    > >> >> However, I doubt it's this. Can you give any more details as to what
    > >> >> "I
    > >> >> cannot access it from IE" actually means? Do you see any messages at
    > >> >> all?
    > >> >> Can you get Fiddler2 and run a trace to see if IE even attempts to
    > >> >> access
    > >> >> the URL? It's possible you still have parts of that trojan kicking
    > >> >> around,
    > >> >> maybe a proxy that IE is forced to use that prevents accessing a
    > >> >> non-standard SSL port to prevent circumvention.
    > >> >>
    > >> >> Dan
    > >> >>
    > >> >>
    > >> >>
    > >> >>
    > >> >> "SteveH" <SteveH@discussions.microsoft.com> wrote in message
    > >> >> news:AD70EF74-1D6A-47B6-A821-307A0A6BE9AB@microsoft.com...
    > >> >> > Hello Dan
    > >> >> >
    > >> >> > Thanks for your reply.
    > >> >> >
    > >> >> > No, I don't think I have changed any settings, but I did have a
    > >> >> > Trojan
    > >> >> > recently which took several days to remove.
    > >> >> >
    > >> >> > The site is: https://exp.ourcp.com:8442/
    > >> >> >
    > >> >> > Thanks
    > >> >> >
    > >> >> > Steve
    > >> >> >
    > >> >> >
    > >> >> >
    > >> >> > "Dan" wrote:
    > >> >> >
    > >> >> >>
    > >> >> >> "SteveH" <SteveH@discussions.microsoft.com> wrote in message
    > >> >> >> news:73B6AF28-5A6E-4C4B-8EEF-F022D871F859@microsoft.com...
    > >> >> >> > Hello
    > >> >> >> >
    > >> >> >> > I am trying to access a https:// site. In Safari it always gives
    > >> >> >> > me
    > >> >> >> > a
    > >> >> >> > certificate error but I can still get to it.
    > >> >> >> >
    > >> >> >> > I cannot access it at all from IE 8 and wonder why that might be.
    > >> >> >> > What
    > >> >> >> > settings do I need to check, please?
    > >> >> >> >
    > >> >> >> > Thanks.
    > >> >> >> >
    > >> >> >> > Steve
    > >> >> >>
    > >> >> >> Have you changed any settings in IE8? Mine offers me a choice to
    > >> >> >> continue
    > >> >> >> on
    > >> >> >> a "bad" certificate. What is the URL that is not working for you?
    > >> >> >>
    > >> >> >> --
    > >> >> >> Dan
    > >> >> >>
    > >> >> >> .
    > >> >> >>
    > >> >>
    > >> >>
    > >> >>
    > >> >> .
    > >> >>
    > >>
    > >>
    > >>
    > >> .
    > >>

    >
    >
    >
    > .
    >
     
  15. Dan

    Dan Flightless Bird

    Why are you still messing with the performance stats? I clearly stated in my
    previous reply that you need to look at the session inspectors to see if
    there is a response from the server and if so, what the headers look like.

    For an example of the bits to look at, try here:
    http://img.informer.com/screenshots/36/36425_3.png

    Dan


    "SteveH" <SteveH@discussions.microsoft.com> wrote in message
    news:4DE5F42B-269B-40D8-A84E-AE4C8207FF9E@microsoft.com...
    > Hello Dan
    >
    > Managed to get Fiddler to work:
    >
    > ACTUAL PERFORMANCE
    > --------------
    > ClientConnected: 08:46:44.062
    > ClientBeginRequest: 08:46:44.062
    > ClientDoneRequest: 08:46:44.062
    > Gateway Determination: 453ms
    > DNS Lookup: 0ms
    > TCP/IP Connect: 2ms
    > ServerConnected: 08:46:44.546
    > FiddlerBeginRequest: 08:46:44.546
    > ServerGotRequest: 08:46:44.546
    > ServerBeginResponse: 08:46:44.562
    > ServerDoneResponse: 08:46:44.578
    > ClientBeginResponse: 08:46:44.578
    > ClientDoneResponse: 08:46:44.578
    >
    > Overall Elapsed: 00:00:00.5156250
    >
    > Look's as if the connection is OK; it's just the actual browser, I think.
    >
    > Steve
    >
    >
    >
    > "Dan" wrote:
    >
    >>
    >> "SteveH" <SteveH@discussions.microsoft.com> wrote in message
    >> news:1CF32253-8433-4C32-A53D-0EE3A0F83E0C@microsoft.com...
    >> > Hello Dan
    >> >
    >> > This is what I get in Fiddler:
    >> >

    >>
    >> That is all useless for this. You need to start it up, try to connect,
    >> and
    >> view the URLs in the left pane. Then use the session inspector tabs to
    >> see
    >> what is being passed back and forth. If you don't see the return data
    >> with
    >> the login form then something is blocking outgoing access to that port
    >> number.
    >>
    >> What you posted is a performance test - that's nothing to do with HTTP
    >> tracing, it's just a simple test for connectivity.
    >>
    >> > I also removed IE in Add/Remove (it showed that my last IE activity was
    >> > sometime in May - not true, I posted here yesterday in IE).
    >> >
    >> > Then downloaded it again, restarted PC, installed, restarted again, and
    >> > in
    >> > Add/Remove I see IE there installed whith the date f my last IE
    >> > activity -
    >> > same date in May!!

    >>
    >> Don't uninstall/reinstall.
    >>
    >> Dan
    >>
    >> > Steve
    >> >
    >> > "Dan" wrote:
    >> >
    >> >>
    >> >> "SteveH" <SteveH@discussions.microsoft.com> wrote in message
    >> >> news:9495549F-A1A2-4DA9-8CEF-2AF6B547FC72@microsoft.com...
    >> >> > Hello Dan
    >> >> >
    >> >> > I have reset the browser, but that didn't work. That is what I get:
    >> >> >
    >> >> > Internet Explorer cannot display the webpage
    >> >> >
    >> >> > What you can try
    >> >> >
    >> >> > Diagnose Connection Problems
    >> >> >
    >> >> > More information
    >> >> >
    >> >> > When I click 'Diagnose Connection problems', a dialogue box tells me
    >> >> > that
    >> >> > Windows did not detect any problems with the connection. And in the
    >> >> > log:
    >> >> >
    >> >> > Last diagnostic run time: 06/16/10 09:37:38 HTTP, HTTPS, FTP
    >> >> > Diagnostic
    >> >> > HTTP, HTTPS, FTP connectivity
    >> >> >
    >> >> > info FTP (Passive): Successfully connected to ftp.microsoft.com.
    >> >> > info HTTP: Successfully connected to www.microsoft.com.
    >> >> > info HTTPS: Successfully connected to www.microsoft.com.
    >> >> >
    >> >> > I have also looked at Group Policy - it is not configured.
    >> >> >
    >> >> > What I have noticed is that since the Trojan (I believe it has
    >> >> > gone), I
    >> >> > am
    >> >> > unable to connect to the Internet by clicking on the IE logo (that
    >> >> > has
    >> >> > gone).
    >> >> > What I have to do it open a saved IE HTML file and type in the URL I
    >> >> > want
    >> >> > to
    >> >> > visit in the address bar.
    >> >>
    >> >> In that case something is still broken. Have you tried repairing IE
    >> >> from
    >> >> Add/Remove Programs?
    >> >>
    >> >> As to the diagnotic test, note that it only tests outgoing connections
    >> >> on
    >> >> the standard HTTP, HTTPS and FTP ports.
    >> >>
    >> >> I'd also check to see if a router/firewall configuration has been
    >> >> adjusted
    >> >> to block access to that non-standard port number.
    >> >>
    >> >> > I'll try to get Fiddler2 (but I have not heard of that one).
    >> >>
    >> >> http://www.fiddler2.com/fiddler2/
    >> >>
    >> >> It's a debugging tool for viewing HTTP and HTTPS exchanges, very handy
    >> >> for
    >> >> tracing problems with requests from browsers.
    >> >>
    >> >> Dan
    >> >>
    >> >> > Thanks again, Dan.
    >> >> >
    >> >> > Steve
    >> >> >
    >> >> >
    >> >> >
    >> >> > "Dan" wrote:
    >> >> >
    >> >> >> It's possible that your trojan removal has broken something in IE.
    >> >> >> Did
    >> >> >> you
    >> >> >> try the reset?
    >> >> >>
    >> >> >> Also, you might want to check the group policy settings to see if
    >> >> >> anything
    >> >> >> has been changed, for instance:
    >> >> >>
    >> >> >> 1.Start the Group Policy tool (GPEdit.msc).
    >> >> >> 2.Expand the policy structure using the following path: Computer
    >> >> >> Configuration\Administrative Templates\Windows Components\Internet
    >> >> >> Explorer\Internet Control Panel.
    >> >> >> 3.Double-click the Prevent ignoring certificate errors setting.
    >> >> >> 4.If it's Enabled, then set to Disabled.
    >> >> >>
    >> >> >> This GP setting will, if set to Enabled, stop IE from showing the
    >> >> >> warning
    >> >> >> page, it'll just simply not allow you to access the site.
    >> >> >>
    >> >> >>
    >> >> >> However, I doubt it's this. Can you give any more details as to
    >> >> >> what
    >> >> >> "I
    >> >> >> cannot access it from IE" actually means? Do you see any messages
    >> >> >> at
    >> >> >> all?
    >> >> >> Can you get Fiddler2 and run a trace to see if IE even attempts to
    >> >> >> access
    >> >> >> the URL? It's possible you still have parts of that trojan kicking
    >> >> >> around,
    >> >> >> maybe a proxy that IE is forced to use that prevents accessing a
    >> >> >> non-standard SSL port to prevent circumvention.
    >> >> >>
    >> >> >> Dan
    >> >> >>
    >> >> >>
    >> >> >>
    >> >> >>
    >> >> >> "SteveH" <SteveH@discussions.microsoft.com> wrote in message
    >> >> >> news:AD70EF74-1D6A-47B6-A821-307A0A6BE9AB@microsoft.com...
    >> >> >> > Hello Dan
    >> >> >> >
    >> >> >> > Thanks for your reply.
    >> >> >> >
    >> >> >> > No, I don't think I have changed any settings, but I did have a
    >> >> >> > Trojan
    >> >> >> > recently which took several days to remove.
    >> >> >> >
    >> >> >> > The site is: https://exp.ourcp.com:8442/
    >> >> >> >
    >> >> >> > Thanks
    >> >> >> >
    >> >> >> > Steve
    >> >> >> >
    >> >> >> >
    >> >> >> >
    >> >> >> > "Dan" wrote:
    >> >> >> >
    >> >> >> >>
    >> >> >> >> "SteveH" <SteveH@discussions.microsoft.com> wrote in message
    >> >> >> >> news:73B6AF28-5A6E-4C4B-8EEF-F022D871F859@microsoft.com...
    >> >> >> >> > Hello
    >> >> >> >> >
    >> >> >> >> > I am trying to access a https:// site. In Safari it always
    >> >> >> >> > gives
    >> >> >> >> > me
    >> >> >> >> > a
    >> >> >> >> > certificate error but I can still get to it.
    >> >> >> >> >
    >> >> >> >> > I cannot access it at all from IE 8 and wonder why that might
    >> >> >> >> > be.
    >> >> >> >> > What
    >> >> >> >> > settings do I need to check, please?
    >> >> >> >> >
    >> >> >> >> > Thanks.
    >> >> >> >> >
    >> >> >> >> > Steve
    >> >> >> >>
    >> >> >> >> Have you changed any settings in IE8? Mine offers me a choice to
    >> >> >> >> continue
    >> >> >> >> on
    >> >> >> >> a "bad" certificate. What is the URL that is not working for
    >> >> >> >> you?
    >> >> >> >>
    >> >> >> >> --
    >> >> >> >> Dan
    >> >> >> >>
    >> >> >> >> .
    >> >> >> >>
    >> >> >>
    >> >> >>
    >> >> >>
    >> >> >> .
    >> >> >>
    >> >>
    >> >>
    >> >>
    >> >> .
    >> >>

    >>
    >>
    >>
    >> .
    >>
     
  16. SteveH

    SteveH Flightless Bird

    Hello

    Thanks again for your posts.

    If I go to any Web site I get:

    Under Request headers (client) I have:

    Accept: image/gif, image/jpeg, image/pjpeg, image/pjpeg,
    application/x-shockwave-flash, application/vnd.ms-excel,
    application/vnd.ms-powerpoint, application/msword,
    application/x-ms-application, application/x-ms-xbap,
    application/vnd.ms-xpsdocument, application/xaml+xml, */*
    Accept-Encoding: gzip, deflate
    Accept-Language: en-gb
    User-Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0;
    InfoPath.1; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152)

    Under Cookies:

    ASPSESSIONIDQQARRQSS=OFLFNCHDEGDOIPMFPDOFPLNI

    Under transport:

    Host: www.proofreading4students.com
    Proxy-Connection: Keep-Alive


    If I go to the Web site with the bad certificate, I get the following in the
    left pane:

    # Result Protocol Host URL Body Caching Content-Type Process Comments Custom
    2 0 HTTP CONNECT exp.ourcp.com:8442 0 iexplore:2700

    and in the right pane under Request Headers:

    CONNECT exp.ourcp.com:8442 HTTP/1.0

    Cache:
    Pragma: no-cache

    Client:
    User-Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0;
    InfoPath.1; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152)

    Entity:
    Content-Length: 0

    Transport:
    Host: exp.ourcp.com:8442
    Proxy-Connection: Keep-Alive

    Steve
























    "Robert Aldwinckle" wrote:

    >
    >
    > "SteveH" <SteveH@discussions.microsoft.com> wrote in message
    > news:1CF32253-8433-4C32-A53D-0EE3A0F83E0C@microsoft.com...
    > > Hello Dan
    > >
    > > This is what I get in Fiddler:

    >
    >
    > > RESPONSE CODES
    > > --------------
    > > HTTP/200: 1
    > >
    > > RESPONSE BYTES (by Content-Type)
    > > --------------
    > > ~headers: 331
    > > text/plain: 305

    >
    >
    > Looks like it worked. What was the test?
    >
    >
    > ---
    >
    > .
    >
     
  17. Dan

    Dan Flightless Bird

    And what about response headers? Are there any?

    If not, then it means that the server never responds - so you really need to
    start looking at something between your browser and the server, such as a
    firewall, proxy server, or something else that is interfering/blocking the
    responses.

    Dan


    "SteveH" <SteveH@discussions.microsoft.com> wrote in message
    news:A114F805-BED4-482E-933F-3A38C470D63B@microsoft.com...
    > Hello
    >
    > Thanks again for your posts.
    >
    > If I go to any Web site I get:
    >
    > Under Request headers (client) I have:
    >
    > Accept: image/gif, image/jpeg, image/pjpeg, image/pjpeg,
    > application/x-shockwave-flash, application/vnd.ms-excel,
    > application/vnd.ms-powerpoint, application/msword,
    > application/x-ms-application, application/x-ms-xbap,
    > application/vnd.ms-xpsdocument, application/xaml+xml, */*
    > Accept-Encoding: gzip, deflate
    > Accept-Language: en-gb
    > User-Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1;
    > Trident/4.0;
    > InfoPath.1; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152)
    >
    > Under Cookies:
    >
    > ASPSESSIONIDQQARRQSS=OFLFNCHDEGDOIPMFPDOFPLNI
    >
    > Under transport:
    >
    > Host: www.proofreading4students.com
    > Proxy-Connection: Keep-Alive
    >
    >
    > If I go to the Web site with the bad certificate, I get the following in
    > the
    > left pane:
    >
    > # Result Protocol Host URL Body Caching Content-Type Process Comments
    > Custom
    > 2 0 HTTP CONNECT exp.ourcp.com:8442 0 iexplore:2700
    >
    > and in the right pane under Request Headers:
    >
    > CONNECT exp.ourcp.com:8442 HTTP/1.0
    >
    > Cache:
    > Pragma: no-cache
    >
    > Client:
    > User-Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1;
    > Trident/4.0;
    > InfoPath.1; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152)
    >
    > Entity:
    > Content-Length: 0
    >
    > Transport:
    > Host: exp.ourcp.com:8442
    > Proxy-Connection: Keep-Alive
    >
    > Steve
    >
    >
    >
    >
    >
    >
    >
    >
    >
    >
    >
    >
    >
    >
    >
    >
    >
    >
    >
    >
    >
    >
    >
    >
    > "Robert Aldwinckle" wrote:
    >
    >>
    >>
    >> "SteveH" <SteveH@discussions.microsoft.com> wrote in message
    >> news:1CF32253-8433-4C32-A53D-0EE3A0F83E0C@microsoft.com...
    >> > Hello Dan
    >> >
    >> > This is what I get in Fiddler:

    >>
    >>
    >> > RESPONSE CODES
    >> > --------------
    >> > HTTP/200: 1
    >> >
    >> > RESPONSE BYTES (by Content-Type)
    >> > --------------
    >> > ~headers: 331
    >> > text/plain: 305

    >>
    >>
    >> Looks like it worked. What was the test?
    >>
    >>
    >> ---
    >>
    >> .
    >>
     

Share This Page