H
hlp
Flightless Bird
It displays that system32/drivers is deleted or corrupted
-
Welcome to Tux Reports: Where Penguins Fly. We hope you find the topics varied, interesting, and worthy of your time. Please become a member and join in the discussions.
M
meerkat
Flightless Bird
"hlp" <hlp@discussions.microsoft.com> wrote in message
news:BE24AE08-987A-4625-BF97-AC4415903444@microsoft.com...
> It displays that system32/drivers is deleted or corrupted.
..
Boot from your winXP CD, and do a System repair.
news:BE24AE08-987A-4625-BF97-AC4415903444@microsoft.com...
> It displays that system32/drivers is deleted or corrupted.
..
Boot from your winXP CD, and do a System repair.
R
Rich Barry
Flightless Bird
Hopefully you have a WinXP CD. If yes, try a Repair Install. Check
below site for more info.
http://michaelstevenstech.com/XPrepairinstall.htm
"hlp" <hlp@discussions.microsoft.com> wrote in message
news:BE24AE08-987A-4625-BF97-AC4415903444@microsoft.com...
> It displays that system32/drivers is deleted or corrupted
below site for more info.
http://michaelstevenstech.com/XPrepairinstall.htm
"hlp" <hlp@discussions.microsoft.com> wrote in message
news:BE24AE08-987A-4625-BF97-AC4415903444@microsoft.com...
> It displays that system32/drivers is deleted or corrupted
J
Jose
Flightless Bird
On Jan 20, 3
9 pm, hlp <h...@discussions.microsoft.com> wrote:
> It displays that system32/drivers is deleted or corrupted
You need to tell us exactly what the message says as best you can when
you see problems.
The message is probably more like - ...some file is missing or
corrupt?
Messages of this nature are relatively common and easy to solve.
Issues like this usually occur after a power failure, aborted restart
or improper shutdown.
Have any of those events occurred?
You should first boot your PC into the XP Recovery Console using a
bootable XP installation CD or a bootable CD with the XP Recovery
Console on it. This is not the same as any Recovey or System CDs that
may have come with a store bought system.
Once you are in the Recovery Console, you should run the chkdsk
command to verify the integrity of your file system, then decide what
to do next.
If you do not have a bootable XP installation CD, you can make a
bootable Recovery Console CD.
The bootable ISO image file you need to download is called:
xp_rec_con.iso
Download the ISO file from here:
http://www.mediafire.com/?ueyyzfymmig
Use this free and easy program to create your bootable CD:
http://www.imgburn.com/
It would be a good idea to test your bootable CD on a computer that is
working.
You may need to adjust the computer BIOS settings to use the CD ROM
drive as the first boot device instead of the hard disk. These
adjustments are made before Windows tries to load. If you miss it,
you will have to reboot the system again.
When you boot on the CD, follow the prompts:
Press any key to boot from CD...
The Windows Setup... will proceed.
Press 'R' to enter the Recovery Console.
Select the installation you want to access (usually 1: CWINDOWS)
You may be asked to enter the Administrator password (usually empty).
You should be in the CWINDOWS folder. This is the same as the C:
\WINDOWS folder you see in explorer.
RC allows basic file commands - copy, rename, replace, delete, cd,
chkdsk, fixboot, fixmbr, etc.
From the command prompt window run the chkdsk command on the drive
where Windows is installed to try to repair any problems on the
afflicted drive.
Running chkdsk is fine to run even if it doesn't find any problems.
Assuming your boot drive is C, run the following command:
chkdsk C: /r
Let chkdsk finish and correct any problems it might find. It may take
a long time to complete or appear to be 'stuck'. Be patient. If the
HDD light is still flashing, it is doing something. Keep an eye on
the percentage amount to be sure it is still making progress.
Remove the CD and type 'exit' to leave the RC and restart the
computer.
You do not have to adjust the BIOS again to boot on the HDD since the
CD will not be present.
9 pm, hlp <h...@discussions.microsoft.com> wrote:> It displays that system32/drivers is deleted or corrupted
You need to tell us exactly what the message says as best you can when
you see problems.
The message is probably more like - ...some file is missing or
corrupt?
Messages of this nature are relatively common and easy to solve.
Issues like this usually occur after a power failure, aborted restart
or improper shutdown.
Have any of those events occurred?
You should first boot your PC into the XP Recovery Console using a
bootable XP installation CD or a bootable CD with the XP Recovery
Console on it. This is not the same as any Recovey or System CDs that
may have come with a store bought system.
Once you are in the Recovery Console, you should run the chkdsk
command to verify the integrity of your file system, then decide what
to do next.
If you do not have a bootable XP installation CD, you can make a
bootable Recovery Console CD.
The bootable ISO image file you need to download is called:
xp_rec_con.iso
Download the ISO file from here:
http://www.mediafire.com/?ueyyzfymmig
Use this free and easy program to create your bootable CD:
http://www.imgburn.com/
It would be a good idea to test your bootable CD on a computer that is
working.
You may need to adjust the computer BIOS settings to use the CD ROM
drive as the first boot device instead of the hard disk. These
adjustments are made before Windows tries to load. If you miss it,
you will have to reboot the system again.
When you boot on the CD, follow the prompts:
Press any key to boot from CD...
The Windows Setup... will proceed.
Press 'R' to enter the Recovery Console.
Select the installation you want to access (usually 1: C
WINDOWS)You may be asked to enter the Administrator password (usually empty).
You should be in the C
WINDOWS folder. This is the same as the C:\WINDOWS folder you see in explorer.
RC allows basic file commands - copy, rename, replace, delete, cd,
chkdsk, fixboot, fixmbr, etc.
From the command prompt window run the chkdsk command on the drive
where Windows is installed to try to repair any problems on the
afflicted drive.
Running chkdsk is fine to run even if it doesn't find any problems.
Assuming your boot drive is C, run the following command:
chkdsk C: /r
Let chkdsk finish and correct any problems it might find. It may take
a long time to complete or appear to be 'stuck'. Be patient. If the
HDD light is still flashing, it is doing something. Keep an eye on
the percentage amount to be sure it is still making progress.
Remove the CD and type 'exit' to leave the RC and restart the
computer.
You do not have to adjust the BIOS again to boot on the HDD since the
CD will not be present.