Very slow burn speed...

Roy · Jul 29, 2010

dvd drive xp home
When disk is inserted the drive page opens up and shows the disk content.
Also, when I burn a 2 1/2 minute data disk it now takes 11 minutes. Just
started doing both within the last 48 hrs. I have not d/l anything within the
past week. Researching this for many hours to no avail. Maybe,buffering? Any
sane or insane answer will be greatly appreciated.

OS Name Microsoft Windows XP Home Edition
Version 5.1.2600 Service Pack 3 Build 2600
OS Manufacturer Microsoft Corporation
System Name
System Manufacturer INTELR
System Model AWRDACPI
System Type X86-based PC
Processor x86 Family 15 Model 3 Stepping 4 GenuineIntel ~2811 Mhz
BIOS Version/Date Phoenix Technologies, LTD 6.00 PG, 9/27/2006
SMBIOS Version 2.2
Windows Directory C

WINDOWS
System Directory C

WINDOWS\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413-2111)"
User Name
Time Zone Eastern Daylight Time
Total Physical Memory 2,048.00 MB
Available Physical Memory 1.41 GB
Total Virtual Memory 2.00 GB
Available Virtual Memory 1.96 GB
Page File Space 4.82 GB
Page File C

pagefile.sys
Drive E:
Description CD-ROM Drive
Media Loaded No
Media Type CD-ROM
Name _NEC DVD_RW ND-3500AG
Manufacturer (Standard CD-ROM drives)
Status OK
Transfer Rate Not Available
SCSI Target ID 0
PNP Device ID
IDE\CDROM_NEC_DVD_RW_ND-3500AG___________________2.98____\5&3B90A244&0&0.0.0
Driver c

windows\system32\drivers\cdrom.sys (5.1.2600.5512
(xpsp.080413-210

, 61.50 KB (62,976 bytes), 8/4/2004 1:59 AM)
Nero 7 Ultra
--
Roy

Roy · Jul 29, 2010

Sorry, forgot to add that the activity light pauses and blinks when burning.
--
Roy

"Roy" wrote:

> dvd drive xp home
> When disk is inserted the drive page opens up and shows the disk content.
> Also, when I burn a 2 1/2 minute data disk it now takes 11 minutes. Just
> started doing both within the last 48 hrs. I have not d/l anything within the
> past week. Researching this for many hours to no avail. Maybe,buffering? Any
> sane or insane answer will be greatly appreciated.
>
> OS Name Microsoft Windows XP Home Edition
> Version 5.1.2600 Service Pack 3 Build 2600
> OS Manufacturer Microsoft Corporation
> System Name
> System Manufacturer INTELR
> System Model AWRDACPI
> System Type X86-based PC
> Processor x86 Family 15 Model 3 Stepping 4 GenuineIntel ~2811 Mhz
> BIOS Version/Date Phoenix Technologies, LTD 6.00 PG, 9/27/2006
> SMBIOS Version 2.2
> Windows Directory C

WINDOWS
> System Directory C

WINDOWS\system32
> Boot Device \Device\HarddiskVolume1
> Locale United States
> Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413-2111)"
> User Name
> Time Zone Eastern Daylight Time
> Total Physical Memory 2,048.00 MB
> Available Physical Memory 1.41 GB
> Total Virtual Memory 2.00 GB
> Available Virtual Memory 1.96 GB
> Page File Space 4.82 GB
> Page File C

pagefile.sys
> Drive E:
> Description CD-ROM Drive
> Media Loaded No
> Media Type CD-ROM
> Name _NEC DVD_RW ND-3500AG
> Manufacturer (Standard CD-ROM drives)
> Status OK
> Transfer Rate Not Available
> SCSI Target ID 0
> PNP Device ID
> IDE\CDROM_NEC_DVD_RW_ND-3500AG___________________2.98____\5&3B90A244&0&0.0.0
> Driver c

windows\system32\drivers\cdrom.sys (5.1.2600.5512
> (xpsp.080413-210

, 61.50 KB (62,976 bytes), 8/4/2004 1:59 AM)
> Nero 7 Ultra
> --
> Roy

Paul · Jul 29, 2010

Roy wrote:
> dvd drive xp home
> When disk is inserted the drive page opens up and shows the disk content.
> Also, when I burn a 2 1/2 minute data disk it now takes 11 minutes. Just
> started doing both within the last 48 hrs. I have not d/l anything within the
> past week. Researching this for many hours to no avail. Maybe,buffering? Any
> sane or insane answer will be greatly appreciated.
>
> OS Name Microsoft Windows XP Home Edition
> Version 5.1.2600 Service Pack 3 Build 2600
> OS Manufacturer Microsoft Corporation
> System Name
> System Manufacturer INTELR
> System Model AWRDACPI
> System Type X86-based PC
> Processor x86 Family 15 Model 3 Stepping 4 GenuineIntel ~2811 Mhz
> BIOS Version/Date Phoenix Technologies, LTD 6.00 PG, 9/27/2006
> SMBIOS Version 2.2
> Windows Directory C

WINDOWS
> System Directory C

WINDOWS\system32
> Boot Device \Device\HarddiskVolume1
> Locale United States
> Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413-2111)"
> User Name
> Time Zone Eastern Daylight Time
> Total Physical Memory 2,048.00 MB
> Available Physical Memory 1.41 GB
> Total Virtual Memory 2.00 GB
> Available Virtual Memory 1.96 GB
> Page File Space 4.82 GB
> Page File C

pagefile.sys
> Drive E:
> Description CD-ROM Drive
> Media Loaded No
> Media Type CD-ROM
> Name _NEC DVD_RW ND-3500AG
> Manufacturer (Standard CD-ROM drives)
> Status OK
> Transfer Rate Not Available
> SCSI Target ID 0
> PNP Device ID
> IDE\CDROM_NEC_DVD_RW_ND-3500AG___________________2.98____\5&3B90A244&0&0.0.0
> Driver c

windows\system32\drivers\cdrom.sys (5.1.2600.5512
> (xpsp.080413-210

, 61.50 KB (62,976 bytes), 8/4/2004 1:59 AM)
> Nero 7 Ultra

When that happened to me, it was because my USB port driver for USB2
had gone missing, and the interface to my external burner was running
at USB 1.1 rates (about 1 megabyte per second). Since that isn't sufficient
to keep the buffer full during a burn, the LED on the drive would go on
for a second, then off for several seconds, repeatedly. No data was lost,
because the drive had some form of "burnproof" that can withstand data
underruns.

Using MSINFO32 here, I can see that your drive "IDE\CDROM" is an
internal drive. It could be, that the interface is now in PIO mode.

See the "Workaround" section, half way down this page, for what to do.

http://support.microsoft.com/default.aspx?scid=kb;en-us;817472

Paul

Paul · Jul 29, 2010

Paul wrote:
> Roy wrote:
>> dvd drive xp home When disk is inserted the drive page opens up and
>> shows the disk content. Also, when I burn a 2 1/2 minute data disk it
>> now takes 11 minutes. Just started doing both within the last 48 hrs.
>> I have not d/l anything within the past week. Researching this for
>> many hours to no avail. Maybe,buffering? Any sane or insane answer
>> will be greatly appreciated.
>> OS Name Microsoft Windows XP Home Edition
>> Version 5.1.2600 Service Pack 3 Build 2600
>> OS Manufacturer Microsoft Corporation
>> System Name System Manufacturer INTELR
>> System Model AWRDACPI
>> System Type X86-based PC
>> Processor x86 Family 15 Model 3 Stepping 4 GenuineIntel ~2811 Mhz
>> BIOS Version/Date Phoenix Technologies, LTD 6.00 PG, 9/27/2006
>> SMBIOS Version 2.2
>> Windows Directory C

WINDOWS
>> System Directory C

WINDOWS\system32
>> Boot Device \Device\HarddiskVolume1
>> Locale United States
>> Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413-2111)"
>> User Name Time Zone Eastern Daylight Time
>> Total Physical Memory 2,048.00 MB
>> Available Physical Memory 1.41 GB
>> Total Virtual Memory 2.00 GB
>> Available Virtual Memory 1.96 GB
>> Page File Space 4.82 GB
>> Page File C

pagefile.sys
>> Drive E:
>> Description CD-ROM Drive
>> Media Loaded No
>> Media Type CD-ROM
>> Name _NEC DVD_RW ND-3500AG
>> Manufacturer (Standard CD-ROM drives)
>> Status OK
>> Transfer Rate Not Available
>> SCSI Target ID 0
>> PNP Device ID
>> IDE\CDROM_NEC_DVD_RW_ND-3500AG___________________2.98____\5&3B90A244&0&0.0.0
>>
>> Driver c

windows\system32\drivers\cdrom.sys (5.1.2600.5512
>> (xpsp.080413-210

, 61.50 KB (62,976 bytes), 8/4/2004 1:59 AM)
>> Nero 7 Ultra
>
> When that happened to me, it was because my USB port driver for USB2
> had gone missing, and the interface to my external burner was running
> at USB 1.1 rates (about 1 megabyte per second). Since that isn't sufficient
> to keep the buffer full during a burn, the LED on the drive would go on
> for a second, then off for several seconds, repeatedly. No data was lost,
> because the drive had some form of "burnproof" that can withstand data
> underruns.
>
> Using MSINFO32 here, I can see that your drive "IDE\CDROM" is an
> internal drive. It could be, that the interface is now in PIO mode.
>
> See the "Workaround" section, half way down this page, for what to do.
>
> http://support.microsoft.com/default.aspx?scid=kb;en-us;817472
>
>
> Paul

Something else I just tested.

I put a CD into the tray of my "IDE\CDROM", and ran MSINFO32 again. This
time, it populated the Transfer Rate field. So you will get a value for
that field, if burned media is present.

"Transfer Rate 3942.86 kbytes/sec"

Using 150KB/sec as the "1x rate", that is about 26x rate.

If I use Nero CD/DVD Speed tool in the Tools folder of Nero (that tool
has had more than one name over its lifetime), and I had it measure the
transfer rate. The CD I used to test, has only 200MB on it. The 26x
corresponds to the fastest part of the recording, at the end of the
recorded area. So the MSINFO32 is giving a good estimate of the peak
transfer rate possible on a read. It doesn't tell us whether the interface
is in PIO mode. But I believe one of the Nero tools in that same folder,
can tell you the mode it is in. My media is 48X, for what that is worth.
It might have achieved a higher value, for a CD that was burned right
to the end.

OK, using Nero InfoTool 4, "Configuration" tab, "DVD/CD-ROM drives",
there is a "Current DMA mode: UDMA2 field" shown for my old CR52 IDE
burner. And UDMA2 is fast enough (33MB/sec) for any media I might use.
It is as effective, as if I had the drive connected by USB2 (which is
~30MB/sec).

So give the InfoTool a try, and see what mode the IDE cable is in.

Paul

Jim · Jul 29, 2010

On Thu, 29 Jul 2010 00:58:04 -0700, Roy
<Roy@discussions.microsoft.com> wrote:

> dvd drive xp home
>When disk is inserted the drive page opens up and shows the disk content.
>Also, when I burn a 2 1/2 minute data disk it now takes 11 minutes. Just
>started doing both within the last 48 hrs. I have not d/l anything within the
>past week. Researching this for many hours to no avail. Maybe,buffering? Any
>sane or insane answer will be greatly appreciated.
>
>OS Name Microsoft Windows XP Home Edition
>Version 5.1.2600 Service Pack 3 Build 2600
>OS Manufacturer Microsoft Corporation
>System Name
>System Manufacturer INTELR
>System Model AWRDACPI
>System Type X86-based PC
>Processor x86 Family 15 Model 3 Stepping 4 GenuineIntel ~2811 Mhz
>BIOS Version/Date Phoenix Technologies, LTD 6.00 PG, 9/27/2006
>SMBIOS Version 2.2
>Windows Directory C

WINDOWS
>System Directory C

WINDOWS\system32
>Boot Device \Device\HarddiskVolume1
>Locale United States
>Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413-2111)"
>User Name
>Time Zone Eastern Daylight Time
>Total Physical Memory 2,048.00 MB
>Available Physical Memory 1.41 GB
>Total Virtual Memory 2.00 GB
>Available Virtual Memory 1.96 GB
>Page File Space 4.82 GB
>Page File C

pagefile.sys
>Drive E:
>Description CD-ROM Drive
>Media Loaded No
>Media Type CD-ROM
>Name _NEC DVD_RW ND-3500AG
>Manufacturer (Standard CD-ROM drives)
>Status OK
>Transfer Rate Not Available
>SCSI Target ID 0
>PNP Device ID
>IDE\CDROM_NEC_DVD_RW_ND-3500AG___________________2.98____\5&3B90A244&0&0.0.0
>Driver c

windows\system32\drivers\cdrom.sys (5.1.2600.5512
>(xpsp.080413-210

, 61.50 KB (62,976 bytes), 8/4/2004 1:59 AM)
>Nero 7 Ultra

System restore to 3 days ago , see what happens ?

Twayne · Jul 29, 2010

In news

3710768-016C-465B-9754-7CE3F4B67C7F@microsoft.com,
Roy <Roy@discussions.microsoft.com> typed:
> dvd drive xp home
> When disk is inserted the drive page opens up and shows the
> disk content. Also, when I burn a 2 1/2 minute data disk it
> now takes 11 minutes. Just started doing both within the
> last 48 hrs. I have not d/l anything within the past week.
> Researching this for many hours to no avail.
> Maybe,buffering? Any sane or insane answer will be greatly
> appreciated.
>
> OS Name Microsoft Windows XP Home Edition
> Version 5.1.2600 Service Pack 3 Build 2600
> OS Manufacturer Microsoft Corporation
> System Name
> System Manufacturer INTELR
> System Model AWRDACPI
> System Type X86-based PC
> Processor x86 Family 15 Model 3 Stepping 4 GenuineIntel
> ~2811 Mhz
> BIOS Version/Date Phoenix Technologies, LTD 6.00 PG,
> 9/27/2006
> SMBIOS Version 2.2
> Windows Directory C

WINDOWS
> System Directory C

WINDOWS\system32
> Boot Device \Device\HarddiskVolume1
> Locale United States
> Hardware Abstraction Layer Version = "5.1.2600.5512
> (xpsp.080413-2111)" User Name
> Time Zone Eastern Daylight Time
> Total Physical Memory 2,048.00 MB
> Available Physical Memory 1.41 GB
> Total Virtual Memory 2.00 GB
> Available Virtual Memory 1.96 GB
> Page File Space 4.82 GB
> Page File C

pagefile.sys
> Drive E:
> Description CD-ROM Drive
> Media Loaded No
> Media Type CD-ROM
> Name _NEC DVD_RW ND-3500AG
> Manufacturer (Standard CD-ROM drives)
> Status OK
> Transfer Rate Not Available
> SCSI Target ID 0
> PNP Device ID
> IDE\CDROM_NEC_DVD_RW_ND-3500AG___________________2.98____\5&3B90A244&0&0.0.0
> Driver c

windows\system32\drivers\cdrom.sys
> (5.1.2600.5512 (xpsp.080413-210

, 61.50 KB (62,976 bytes),
> 8/4/2004 1:59 AM)
> Nero 7 Ultra

A a 2 1/2 minute data disk is contradictory and meaningless. Music maybe?
Data does not have a duration along with it.

I'd start by checking to see how high the fragmentation is, and if it's over
50% definitely do a defrag of the disk.

Give a better description of the problem and get a better answer.

Mark Adams · Jul 29, 2010

"Twayne" wrote:

> In news

3710768-016C-465B-9754-7CE3F4B67C7F@microsoft.com,
> Roy <Roy@discussions.microsoft.com> typed:
> > dvd drive xp home
> > When disk is inserted the drive page opens up and shows the
> > disk content. Also, when I burn a 2 1/2 minute data disk it
> > now takes 11 minutes. Just started doing both within the
> > last 48 hrs. I have not d/l anything within the past week.
> > Researching this for many hours to no avail.
> > Maybe,buffering? Any sane or insane answer will be greatly
> > appreciated.
> >
> > OS Name Microsoft Windows XP Home Edition
> > Version 5.1.2600 Service Pack 3 Build 2600
> > OS Manufacturer Microsoft Corporation
> > System Name
> > System Manufacturer INTELR
> > System Model AWRDACPI
> > System Type X86-based PC
> > Processor x86 Family 15 Model 3 Stepping 4 GenuineIntel
> > ~2811 Mhz
> > BIOS Version/Date Phoenix Technologies, LTD 6.00 PG,
> > 9/27/2006
> > SMBIOS Version 2.2
> > Windows Directory C

WINDOWS
> > System Directory C

WINDOWS\system32
> > Boot Device \Device\HarddiskVolume1
> > Locale United States
> > Hardware Abstraction Layer Version = "5.1.2600.5512
> > (xpsp.080413-2111)" User Name
> > Time Zone Eastern Daylight Time
> > Total Physical Memory 2,048.00 MB
> > Available Physical Memory 1.41 GB
> > Total Virtual Memory 2.00 GB
> > Available Virtual Memory 1.96 GB
> > Page File Space 4.82 GB
> > Page File C

pagefile.sys
> > Drive E:
> > Description CD-ROM Drive
> > Media Loaded No
> > Media Type CD-ROM
> > Name _NEC DVD_RW ND-3500AG
> > Manufacturer (Standard CD-ROM drives)
> > Status OK
> > Transfer Rate Not Available
> > SCSI Target ID 0
> > PNP Device ID
> > IDE\CDROM_NEC_DVD_RW_ND-3500AG___________________2.98____\5&3B90A244&0&0.0.0
> > Driver c

windows\system32\drivers\cdrom.sys
> > (5.1.2600.5512 (xpsp.080413-210

, 61.50 KB (62,976 bytes),
> > 8/4/2004 1:59 AM)
> > Nero 7 Ultra
>
> A a 2 1/2 minute data disk is contradictory and meaningless. Music maybe?
> Data does not have a duration along with it.
>
> I'd start by checking to see how high the fragmentation is, and if it's over
> 50% definitely do a defrag of the disk.
>
> Give a better description of the problem and get a better answer.
>
>

Twayne, I think he means that a data disk that used to take 2 1/2 minutes to
burn now takes 11 minutes to burn. Something has slowed down the burn rate.

Justin · Jul 30, 2010

In article <B432D261-CAE6-46E5-8534-DF23F7B7DFAA@microsoft.com>,
Roy <Roy@discussions.microsoft.com> wrote:

> Sorry, forgot to add that the activity light pauses and blinks when burning.
> --
> Roy
>
>
> "Roy" wrote:
>
> > dvd drive xp home
> > When disk is inserted the drive page opens up and shows the disk content.
> > Also, when I burn a 2 1/2 minute data disk it now takes 11 minutes. Just
> > started doing both within the last 48 hrs. I have not d/l anything within
> > the
> > past week. Researching this for many hours to no avail. Maybe,buffering?
> > Any
> > sane or insane answer will be greatly appreciated.
> >
> > OS Name Microsoft Windows XP Home Edition
> > Version 5.1.2600 Service Pack 3 Build 2600
> > OS Manufacturer Microsoft Corporation
> > System Name
> > System Manufacturer INTELR
> > System Model AWRDACPI
> > System Type X86-based PC
> > Processor x86 Family 15 Model 3 Stepping 4 GenuineIntel ~2811 Mhz
> > BIOS Version/Date Phoenix Technologies, LTD 6.00 PG, 9/27/2006
> > SMBIOS Version 2.2
> > Windows Directory C

WINDOWS
> > System Directory C

WINDOWS\system32
> > Boot Device \Device\HarddiskVolume1
> > Locale United States
> > Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413-2111)"
> > User Name
> > Time Zone Eastern Daylight Time
> > Total Physical Memory 2,048.00 MB
> > Available Physical Memory 1.41 GB
> > Total Virtual Memory 2.00 GB
> > Available Virtual Memory 1.96 GB
> > Page File Space 4.82 GB
> > Page File C

pagefile.sys
> > Drive E:
> > Description CD-ROM Drive
> > Media Loaded No
> > Media Type CD-ROM
> > Name _NEC DVD_RW ND-3500AG
> > Manufacturer (Standard CD-ROM drives)
> > Status OK
> > Transfer Rate Not Available
> > SCSI Target ID 0
> > PNP Device ID
> > IDE\CDROM_NEC_DVD_RW_ND-3500AG___________________2.98____\5&3B90A244&0&0.0.0
> > Driver c

windows\system32\drivers\cdrom.sys (5.1.2600.5512
> > (xpsp.080413-210

, 61.50 KB (62,976 bytes), 8/4/2004 1:59 AM)
> > Nero 7 Ultra
> > --
> > Roy

Hi Roy, if you look at Paul's last post I think he hit the nail right on
the head.
I saw this happen with a USB card reader. For some reason Windows
decided to revert to USB 1.1 drivers across the board on the USB bus.
Once I reinstalled the USB drivers all was well and fast.

Twayne · Jul 31, 2010

In news

6BD4FE8-B456-40F1-8635-269D0FCACECF@microsoft.com,
Mark Adams <MarkAdams@discussions.microsoft.com> typed:
> "Twayne" wrote:
>
>> In news

3710768-016C-465B-9754-7CE3F4B67C7F@microsoft.com,
>> Roy <Roy@discussions.microsoft.com> typed:
>>> dvd drive xp home
>>> When disk is inserted the drive page opens up and shows
>>> the disk content. Also, when I burn a 2 1/2 minute data
>>> disk it now takes 11 minutes. Just started doing both
>>> within the last 48 hrs. I have not d/l anything within
>>> the past week. Researching this for many hours to no
>>> avail. Maybe,buffering? Any sane or insane answer will be
>>> greatly appreciated.
>>>
>>> OS Name Microsoft Windows XP Home Edition
>>> Version 5.1.2600 Service Pack 3 Build 2600
>>> OS Manufacturer Microsoft Corporation
>>> System Name
>>> System Manufacturer INTELR
>>> System Model AWRDACPI
>>> System Type X86-based PC
>>> Processor x86 Family 15 Model 3 Stepping 4 GenuineIntel
>>> ~2811 Mhz
>>> BIOS Version/Date Phoenix Technologies, LTD 6.00 PG,
>>> 9/27/2006
>>> SMBIOS Version 2.2
>>> Windows Directory C

WINDOWS
>>> System Directory C

WINDOWS\system32
>>> Boot Device \Device\HarddiskVolume1
>>> Locale United States
>>> Hardware Abstraction Layer Version = "5.1.2600.5512
>>> (xpsp.080413-2111)" User Name
>>> Time Zone Eastern Daylight Time
>>> Total Physical Memory 2,048.00 MB
>>> Available Physical Memory 1.41 GB
>>> Total Virtual Memory 2.00 GB
>>> Available Virtual Memory 1.96 GB
>>> Page File Space 4.82 GB
>>> Page File C

pagefile.sys
>>> Drive E:
>>> Description CD-ROM Drive
>>> Media Loaded No
>>> Media Type CD-ROM
>>> Name _NEC DVD_RW ND-3500AG
>>> Manufacturer (Standard CD-ROM drives)
>>> Status OK
>>> Transfer Rate Not Available
>>> SCSI Target ID 0
>>> PNP Device ID
>>> IDE\CDROM_NEC_DVD_RW_ND-3500AG___________________2.98____\5&3B90A244&0&0.0.0
>>> Driver c

windows\system32\drivers\cdrom.sys
>>> (5.1.2600.5512 (xpsp.080413-210

, 61.50 KB (62,976
>>> bytes), 8/4/2004 1:59 AM)
>>> Nero 7 Ultra
>>
>> A a 2 1/2 minute data disk is contradictory and
>> meaningless. Music maybe? Data does not have a duration
>> along with it.
>>
>> I'd start by checking to see how high the fragmentation
>> is, and if it's over 50% definitely do a defrag of the
>> disk.
>>
>> Give a better description of the problem and get a better
>> answer.
>>
>>
>
> Twayne, I think he means that a data disk that used to take
> 2 1/2 minutes to burn now takes 11 minutes to burn.
> Something has slowed down the burn rate.

Mmm, I see; thanks.

HTH,

Twayne`

Roy · Aug 6, 2010

Sorry for the delay and log......hope it helps.....

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.11.10.0
Internal Version: 7, 11, 10, 0
(Nero Express)
Recorder: <_NEC DVD_RW ND-3500AG> Version: 2.98 - HA 1 TA 0 -
7.11.10.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <_NEC DVD_RW ND-3500AG>Version: 2.98 - HA 1 TA 0 -
7.11.10.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : _NEC DVD_RW ND-3500AG atapi Port 0 ID 0
DMA: Off
DiskPeripheral : HDS722516VLSA80 atapi Port 1 ID 0
DMA: On

=== CDRom-Device-Map ===
_NEC DVD_RW ND-3500AG E: CdRom0
=======================

AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2039MB (2088428k

Free physical memory: 1357MB (1390280k

Memory in use : 33 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

1.8.2010
ISO compilation
5

0:06 AM #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

5

0:06 AM #2 Text 0 File Isodoc.cpp, Line 6711
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

5

0:06 AM #3 ISO9660GEN -11 File Geniso.cpp, Line 3350
First writeable address = 0 (0x00000000)

5

0:06 AM #4 Text 0 File Burncd.cpp, Line 3500
Turn on Disc-At-Once, using DVD media

5

0:06 AM #5 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorDVD'
ParamMode = 'automatic', changing UDF partition type from 'physical' to
'physical'
Changing UDF revision from '1.02' to '1.02'

5

0:06 AM #6 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2295103 (510:01.28, 4482M

Last address to be written: 361055 ( 80:14.05, 705M

5

0:06 AM #7 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

5

0:06 AM #8 Text 0 File DlgWaitCD.cpp, Line 2988
Recorder: _NEC DVD_RW ND-3500AG, Media type: DVD+RW
Disc Manufacturer ID: <RITEK>, Media Type ID: <004>, Product revision
number: 48
Disc Application Code: 0, Extended Information Indicators: 1

5

0:06 AM #9 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

5

0:06 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 778
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 361056 (361056) = #361056/80:14.6
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length
361056 blocks [E: _NEC DVD_RW ND-3500AG]
--------------------------------------------------------------

5

0:06 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 979
Prepare [E: _NEC DVD_RW ND-3500AG] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1
Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0
739442688, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 361056 | 0 | 0x00
361056 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

5

0:06 AM #12 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

5

0:06 AM #13 Text 0 File Burncd.cpp, Line 4286
Caching options: cache CDRom or Network-Yes, small files-No (<64K

5

0:06 AM #14 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started

5

0:06 AM #15 Text 0 File Burncd.cpp, Line 4405
Cache writing successful.

5

0:06 AM #16 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed

5

0:06 AM #17 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 2.4x (3,324 KB/s)

5

0:07 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2726
Verifying disc position of item 0 (relocatable, disc pos, no patch infos,
orig at #0): write at #0

5

0:07 AM #19 Text 0 File Cdrdrv.cpp, Line 10161
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer
Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW,
DVD+R/+RW)
End Physical Sector Number of Data Area: 23FB8F h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: RITEK...
Media type ID: 004
Product revision number: 48
Number of Physical format information bytes in use in ADIP up to byte 63:
57
Media Specific [16..783]:
00 00 01 52 49 54 45 4B - 00 00 00 30 30 34 30 39 ...RITEK...00409
23 00 9C 81 5C 02 28 00 - 96 8A 70 02 28 00 9C 81 #.Â£.\.(.Ã»Ã¨p.(.Â£.
68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00 h.(...Î±.â‰¡.......
01 00 17 38 00 28 A5 46 - 02 2C 00 2F 94 3A 02 2C ...8.(Ã‘F.,./Ã¶:.,
00 2E A3 3C 02 2C 28 35 - 50 00 20 00 40 20 00 00 ..Ãº<.,(5P...@...
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

5

0:07 AM #20 SPTI -1065 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xF9 05 01 FF 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20

5

0:07 AM #21 SPTI -1065 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xF9 04 01 FF 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20

5

0:07 AM #22 Text 0 File DVDR.cpp, Line 7427
Drive: _NEC DVD_RW ND-3500AG
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished with error, return code -1065

5

0:07 AM #23 Text 0 File DVDR.cpp, Line 6834
Drive: _NEC DVD_RW ND-3500AG
Book Type request [NEC]: DVD-ROM
Changing the Book Type was finished with error, return code -1065

5

0:07 AM #24 Text 0 File DVDPlusRW.cpp, Line 675
Start write address at LBA 0
DVD high compatibility mode: Yes

5

0:07 AM #25 Text 0 File ThreadedTransfer.cpp, Line 268
Pipe memory size 83836800

5

1:07 AM #26 SPTI -1106 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03
Buffer x074e0040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

5

1:07 AM #27 CDR -1106 File Writer.cpp, Line 306
Power calibration error
E: _NEC DVD_RW ND-3500AG

5

1:08 AM #28 Text 0 File DVDPlusRW.cpp, Line 935
EndDAO: Last written address 0

5

1:09 AM #29 SPTI -1065 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xF9 06 01 FF 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20

5

1:09 AM #30 Text 0 File DVDR.cpp, Line 7427
Drive: _NEC DVD_RW ND-3500AG
Book Type request [gen]: DVD-ROM, direct update disc
Changing the Book Type was finished with error, return code -1065

5

1:09 AM #31 Text 0 File DVDR.cpp, Line 6834
Drive: _NEC DVD_RW ND-3500AG
Book Type request [NEC]: DVD-ROM, direct update disc
Setting Book Type supported in EEPROM/RAM only

5

1:09 AM #32 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 2.4x (3,324 KB/s)

5

1:09 AM #33 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

5

1:11 AM #34 Text 0 File Cdrdrv.cpp, Line 11411
DriveLocker: UnLockVolume completed

5

1:11 AM #35 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs :
0 (Security Option)

--
Roy

"Twayne" wrote:

> In news

6BD4FE8-B456-40F1-8635-269D0FCACECF@microsoft.com,
> Mark Adams <MarkAdams@discussions.microsoft.com> typed:
> > "Twayne" wrote:
> >
> >> In news

3710768-016C-465B-9754-7CE3F4B67C7F@microsoft.com,
> >> Roy <Roy@discussions.microsoft.com> typed:
> >>> dvd drive xp home
> >>> When disk is inserted the drive page opens up and shows
> >>> the disk content. Also, when I burn a 2 1/2 minute data
> >>> disk it now takes 11 minutes. Just started doing both
> >>> within the last 48 hrs. I have not d/l anything within
> >>> the past week. Researching this for many hours to no
> >>> avail. Maybe,buffering? Any sane or insane answer will be
> >>> greatly appreciated.
> >>>
> >>> OS Name Microsoft Windows XP Home Edition
> >>> Version 5.1.2600 Service Pack 3 Build 2600
> >>> OS Manufacturer Microsoft Corporation
> >>> System Name
> >>> System Manufacturer INTELR
> >>> System Model AWRDACPI
> >>> System Type X86-based PC
> >>> Processor x86 Family 15 Model 3 Stepping 4 GenuineIntel
> >>> ~2811 Mhz
> >>> BIOS Version/Date Phoenix Technologies, LTD 6.00 PG,
> >>> 9/27/2006
> >>> SMBIOS Version 2.2
> >>> Windows Directory C

WINDOWS
> >>> System Directory C

WINDOWS\system32
> >>> Boot Device \Device\HarddiskVolume1
> >>> Locale United States
> >>> Hardware Abstraction Layer Version = "5.1.2600.5512
> >>> (xpsp.080413-2111)" User Name
> >>> Time Zone Eastern Daylight Time
> >>> Total Physical Memory 2,048.00 MB
> >>> Available Physical Memory 1.41 GB
> >>> Total Virtual Memory 2.00 GB
> >>> Available Virtual Memory 1.96 GB
> >>> Page File Space 4.82 GB
> >>> Page File C

pagefile.sys
> >>> Drive E:
> >>> Description CD-ROM Drive
> >>> Media Loaded No
> >>> Media Type CD-ROM
> >>> Name _NEC DVD_RW ND-3500AG
> >>> Manufacturer (Standard CD-ROM drives)
> >>> Status OK
> >>> Transfer Rate Not Available
> >>> SCSI Target ID 0
> >>> PNP Device ID
> >>> IDE\CDROM_NEC_DVD_RW_ND-3500AG___________________2.98____\5&3B90A244&0&0.0.0
> >>> Driver c

windows\system32\drivers\cdrom.sys
> >>> (5.1.2600.5512 (xpsp.080413-210

, 61.50 KB (62,976
> >>> bytes), 8/4/2004 1:59 AM)
> >>> Nero 7 Ultra
> >>
> >> A a 2 1/2 minute data disk is contradictory and
> >> meaningless. Music maybe? Data does not have a duration
> >> along with it.
> >>
> >> I'd start by checking to see how high the fragmentation
> >> is, and if it's over 50% definitely do a defrag of the
> >> disk.
> >>
> >> Give a better description of the problem and get a better
> >> answer.
> >>
> >>
> >
> > Twayne, I think he means that a data disk that used to take
> > 2 1/2 minutes to burn now takes 11 minutes to burn.
> > Something has slowed down the burn rate.
>
> Mmm, I see; thanks.
>
> HTH,
>
> Twayne`
>
>
> .
>

Roy · Aug 6, 2010

Just noticed a clicking sound emiting from the drive when burning.

--
Roy

"Roy" wrote:

> Sorry for the delay and log......hope it helps.....
>
>
>
>
>
>
> Windows XP 5.1
> IA32
> WinAspi: -
>
> NT-SPTI used
> Nero Version: 7.11.10.0
> Internal Version: 7, 11, 10, 0
> (Nero Express)
> Recorder: <_NEC DVD_RW ND-3500AG> Version: 2.98 - HA 1 TA 0 -
> 7.11.10.0
> Adapter driver: <IDE> HA 1
> Drive buffer : 2048kB
> Bus Type : default
> CD-ROM: <_NEC DVD_RW ND-3500AG>Version: 2.98 - HA 1 TA 0 -
> 7.11.10.0
> Adapter driver: <IDE> HA 1
>
> === Scsi-Device-Map ===
> CdRomPeripheral : _NEC DVD_RW ND-3500AG atapi Port 0 ID 0
> DMA: Off
> DiskPeripheral : HDS722516VLSA80 atapi Port 1 ID 0
> DMA: On
>
> === CDRom-Device-Map ===
> _NEC DVD_RW ND-3500AG E: CdRom0
> =======================
>
> AutoRun : 0
> Excluded drive IDs:
> WriteBufferSize: 83886080 (0) Byte
> BUFE : 0
> Physical memory : 2039MB (2088428k

> Free physical memory: 1357MB (1390280k

> Memory in use : 33 %
> Uncached PFiles: 0x0
> Use Inquiry : 1
> Global Bus Type: default (0)
> Check supported media : Disabled (0)
>
> 1.8.2010
> ISO compilation
> 5

0:06 AM #1 Text 0 File SCSIPTICommands.cpp, Line 450
> LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
>
> 5

0:06 AM #2 Text 0 File Isodoc.cpp, Line 6711
> Iso document burn settings
> ------------------------------------------
> Determine maximum speed : FALSE
> Simulate : FALSE
> Write : TRUE
> Finalize CD : TRUE
> Multisession : FALSE
> Burning mode : DAO
> Mode : 1
> ISO Level : 1 (Max. of 11 = 8 + 3 char)
> Character set : ISO 9660
> Joliet : TRUE
> Allow pathdepth more than 8 directories : TRUE
> Allow more than 255 characters in path : TRUE
> Write ISO9660 ;1 file extensions : TRUE
>
> 5

0:06 AM #3 ISO9660GEN -11 File Geniso.cpp, Line 3350
> First writeable address = 0 (0x00000000)
>
> 5

0:06 AM #4 Text 0 File Burncd.cpp, Line 3500
> Turn on Disc-At-Once, using DVD media
>
> 5

0:06 AM #5 Text 0 File FilesystemSettingsValidator.cpp, Line 142
> FS Settings: using validator 'CUDFSettingsValidatorDVD'
> ParamMode = 'automatic', changing UDF partition type from 'physical' to
> 'physical'
> Changing UDF revision from '1.02' to '1.02'
>
> 5

0:06 AM #6 Text 0 File DlgWaitCD.cpp, Line 307
> Last possible write address on media: 2295103 (510:01.28, 4482M

> Last address to be written: 361055 ( 80:14.05, 705M

>
> 5

0:06 AM #7 Text 0 File DlgWaitCD.cpp, Line 319
> Write in overburning mode: NO (enabled: CD)
>
> 5

0:06 AM #8 Text 0 File DlgWaitCD.cpp, Line 2988
> Recorder: _NEC DVD_RW ND-3500AG, Media type: DVD+RW
> Disc Manufacturer ID: <RITEK>, Media Type ID: <004>, Product revision
> number: 48
> Disc Application Code: 0, Extended Information Indicators: 1
>
> 5

0:06 AM #9 Text 0 File DlgWaitCD.cpp, Line 493
> >>> Protocol of DlgWaitCD activities: <<<
> =========================================
>
> 5

0:06 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 778
> Setup items (after recorder preparation)
> 0: TRM_DATA_MODE1 ()
> 2 indices, index0 (150) not provided
> original disc pos #0 + 361056 (361056) = #361056/80:14.6
> relocatable, disc pos for caching/writing not required/ required
> -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length
> 361056 blocks [E: _NEC DVD_RW ND-3500AG]
> --------------------------------------------------------------
>
> 5

0:06 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 979
> Prepare [E: _NEC DVD_RW ND-3500AG] for write in CUE-sheet-DAO
> DAO infos:
> ==========
> MCN: ""
> TOCType: 0x00; Session Closed, disc fixated
> Tracks 1 to 1: Idx 0 Idx 1
> Next Trk
> 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0
> 739442688, ISRC ""
> DAO layout:
> ===========
> ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
> 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
> 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
> 0 | 1 | 1 | 0x41 | 361056 | 0 | 0x00
> 361056 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
>
> 5

0:06 AM #12 Text 0 File SCSIPTICommands.cpp, Line 240
> SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
>
> 5

0:06 AM #13 Text 0 File Burncd.cpp, Line 4286
> Caching options: cache CDRom or Network-Yes, small files-No (<64K

>
> 5

0:06 AM #14 Phase 24 File dlgbrnst.cpp, Line 1767
> Caching of files started
>
> 5

0:06 AM #15 Text 0 File Burncd.cpp, Line 4405
> Cache writing successful.
>
> 5

0:06 AM #16 Phase 25 File dlgbrnst.cpp, Line 1767
> Caching of files completed
>
> 5

0:06 AM #17 Phase 36 File dlgbrnst.cpp, Line 1767
> Burn process started at 2.4x (3,324 KB/s)
>
> 5

0:07 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2726
> Verifying disc position of item 0 (relocatable, disc pos, no patch infos,
> orig at #0): write at #0
>
> 5

0:07 AM #19 Text 0 File Cdrdrv.cpp, Line 10161
> ---- Disc Structure: Physical Format Information (00h) ----
> Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
> Book Type: DVD+RW (9), Part Version: 1.1x (2)
> Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)
> Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer
> Type: re-writable
> Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
> Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW,
> DVD+R/+RW)
> End Physical Sector Number of Data Area: 23FB8F h
> Data in Burst Cutting Area (BCA) does not exist
> Disc Application Code: 0 / 0 h
> Extended Information indicators: 1 h
> Disc Manufacturer ID: RITEK...
> Media type ID: 004
> Product revision number: 48
> Number of Physical format information bytes in use in ADIP up to byte 63:
> 57
> Media Specific [16..783]:
> 00 00 01 52 49 54 45 4B - 00 00 00 30 30 34 30 39 ...RITEK...00409
> 23 00 9C 81 5C 02 28 00 - 96 8A 70 02 28 00 9C 81 #.Â£.\.(.Ã»Ã¨p.(.Â£.
> 68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00 h.(...Î±.â‰¡.......
> 01 00 17 38 00 28 A5 46 - 02 2C 00 2F 94 3A 02 2C ...8.(Ã‘F.,./Ã¶:.,
> 00 2E A3 3C 02 2C 28 35 - 50 00 20 00 40 20 00 00 ..Ãº<.,(5P...@...
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
>
> 5

0:07 AM #20 SPTI -1065 File SCSIPassThrough.cpp, Line 181
> CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
> Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
> Sense Code: 0x20
> Sense Qual: 0x00
> CDB Data: 0xF9 05 01 FF 00 00 00 00 00 00 00 00
> Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
>
> 5

0:07 AM #21 SPTI -1065 File SCSIPassThrough.cpp, Line 181
> CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
> Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
> Sense Code: 0x20
> Sense Qual: 0x00
> CDB Data: 0xF9 04 01 FF 00 00 00 00 00 00 00 00
> Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
>
> 5

0:07 AM #22 Text 0 File DVDR.cpp, Line 7427
> Drive: _NEC DVD_RW ND-3500AG
> Book Type request [gen]: DVD-ROM, write to EEPROM
> Changing the Book Type was finished with error, return code -1065
>
> 5

0:07 AM #23 Text 0 File DVDR.cpp, Line 6834
> Drive: _NEC DVD_RW ND-3500AG
> Book Type request [NEC]: DVD-ROM
> Changing the Book Type was finished with error, return code -1065
>
> 5

0:07 AM #24 Text 0 File DVDPlusRW.cpp, Line 675
> Start write address at LBA 0
> DVD high compatibility mode: Yes
>
> 5

0:07 AM #25 Text 0 File ThreadedTransfer.cpp, Line 268
> Pipe memory size 83836800
>
> 5

1:07 AM #26 SPTI -1106 File SCSIPassThrough.cpp, Line 181
> CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
> Sense Key: 0x03 (KEY_MEDIUM_ERROR)
> Sense Code: 0x73
> Sense Qual: 0x03
> CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
> Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03
> Buffer x074e0040: Len x10000
> 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 5

1:07 AM #27 CDR -1106 File Writer.cpp, Line 306
> Power calibration error
> E: _NEC DVD_RW ND-3500AG
>
> 5

1:08 AM #28 Text 0 File DVDPlusRW.cpp, Line 935
> EndDAO: Last written address 0
>
> 5

1:09 AM #29 SPTI -1065 File SCSIPassThrough.cpp, Line 181
> CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
> Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
> Sense Code: 0x20
> Sense Qual: 0x00
> CDB Data: 0xF9 06 01 FF 00 00 00 00 00 00 00 00
> Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
>
> 5

1:09 AM #30 Text 0 File DVDR.cpp, Line 7427
> Drive: _NEC DVD_RW ND-3500AG
> Book Type request [gen]: DVD-ROM, direct update disc
> Changing the Book Type was finished with error, return code -1065
>
> 5

1:09 AM #31 Text 0 File DVDR.cpp, Line 6834
> Drive: _NEC DVD_RW ND-3500AG
> Book Type request [NEC]: DVD-ROM, direct update disc
> Setting Book Type supported in EEPROM/RAM only
>
> 5

1:09 AM #32 Phase 38 File dlgbrnst.cpp, Line 1767
> Burn process failed at 2.4x (3,324 KB/s)
>
> 5

1:09 AM #33 Text 0 File SCSIPTICommands.cpp, Line 287
> SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
>
> 5

1:11 AM #34 Text 0 File Cdrdrv.cpp, Line 11411
> DriveLocker: UnLockVolume completed
>
> 5

1:11 AM #35 Text 0 File SCSIPTICommands.cpp, Line 450
> UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
>
>
> Existing drivers:

Roy · Aug 7, 2010

I have just deleted and reinstalled dvd drive. The clicking noise
from the burner is no longer present (one down). Below is a new burn and dvd
speed log. Thank you for your help. Roy 8-7-10

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.11.10.0
Internal Version: 7, 11, 10, 0
(Nero Express)
Recorder: <_NEC DVD_RW ND-3500AG> Version: 2.98 - HA 1 TA 0 -
7.11.10.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <_NEC DVD_RW ND-3500AG>Version: 2.98 - HA 1 TA 0 -
7.11.10.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : _NEC DVD_RW ND-3500AG atapi Port 0 ID 0
DMA: Off
DiskPeripheral : HDS722516VLSA80 atapi Port 1 ID 0
DMA: On

=== CDRom-Device-Map ===
_NEC DVD_RW ND-3500AG E: CdRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2039MB (2088428k

Free physical memory: 1396MB (1429888k

Memory in use : 31 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

8.8.2010
ISO compilation
12:40:26 AM #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

12:40:26 AM #2 Text 0 File Isodoc.cpp, Line 6711
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

12:40:26 AM #3 ISO9660GEN -11 File Geniso.cpp, Line 3350
First writeable address = 0 (0x00000000)

12:40:26 AM #4 Text 0 File Burncd.cpp, Line 3500
Turn on Disc-At-Once, using DVD media

12:40:26 AM #5 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorDVD'
ParamMode = 'automatic', changing UDF partition type from 'physical' to
'physical'
Changing UDF revision from '1.02' to '1.02'

12:40:26 AM #6 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2295103 (510:01.28, 4482M

Last address to be written: 357839 ( 79

1.14, 698M

12:40:26 AM #7 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

12:40:26 AM #8 Text 0 File DlgWaitCD.cpp, Line 2988
Recorder: _NEC DVD_RW ND-3500AG, Media type: DVD+RW
Disc Manufacturer ID: <INFODISC>, Media Type ID: <A10>, Product revision
number: 1
Disc Application Code: 0, Extended Information Indicators: 1

12:40:26 AM #9 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

12:40:26 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 778
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 357840 (357840) = #357840/79

1.15
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length
357840 blocks [E: _NEC DVD_RW ND-3500AG]
--------------------------------------------------------------

12:40:26 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 979
Prepare [E: _NEC DVD_RW ND-3500AG] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1
Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0
732856320, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 357840 | 0 | 0x00
357840 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

12:40:26 AM #12 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

12:40:26 AM #13 Text 0 File Burncd.cpp, Line 4286
Caching options: cache CDRom or Network-Yes, small files-No (<64K

12:40:26 AM #14 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started

12:40:26 AM #15 Text 0 File Burncd.cpp, Line 4405
Cache writing successful.

12:40:26 AM #16 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed

12:40:26 AM #17 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 4x (5,540 KB/s)

12:40:26 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2726
Verifying disc position of item 0 (relocatable, disc pos, no patch infos,
orig at #0): write at #0

12:40:26 AM #19 Text 0 File Cdrdrv.cpp, Line 10161
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer
Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW,
DVD+R/+RW)
End Physical Sector Number of Data Area: 6FFFF h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: INFODISC
Media type ID: A10
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63:
57
Media Specific [16..783]:
00 00 01 49 4E 46 4F 44 - 49 53 43 41 31 30 01 39 ...INFODISCA10.9
23 00 9C 7C 5C 02 28 00 - 96 7E 70 02 28 00 9C 7B #..|\.(..~p.(..{
68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00 h.(.............
01 00 17 38 00 28 8B 46 - 02 2C 00 2F 8A 3A 02 2C ...8.(.F.,./.:.,
00 2E 8C 3C 02 2C 28 35 - 50 00 20 00 40 20 00 00 ...<.,(5P...@...
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

12:40:26 AM #20 SPTI -1065 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xF9 05 01 FF 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20

12:40:26 AM #21 SPTI -1065 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xF9 04 01 FF 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20

12:40:26 AM #22 Text 0 File DVDR.cpp, Line 7427
Drive: _NEC DVD_RW ND-3500AG
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished with error, return code -1065

12:40:26 AM #23 Text 0 File DVDR.cpp, Line 6834
Drive: _NEC DVD_RW ND-3500AG
Book Type request [NEC]: DVD-ROM
Changing the Book Type was finished with error, return code -1065

12:40:26 AM #24 Text 0 File DVDPlusRW.cpp, Line 675
Start write address at LBA 0
DVD high compatibility mode: Yes

12:40:26 AM #25 Text 0 File ThreadedTransfer.cpp, Line 268
Pipe memory size 83836800

12:45:45 AM #26 Text 0 File WriterStatus.cpp, Line 245
<E: _NEC DVD_RW ND-3500AG> start writing Lead-Out at LBA 357840 (575D0h),
length 0 blocks

12:45:46 AM #27 Text 0 File DVDPlusRW.cpp, Line 900
Media-Format will be stopped after burning

12:45:46 AM #28 Phase 127 File dlgbrnst.cpp, Line 1767
Generating DVD high compatibility borders

12:46:14 AM #29 Text 0 File DVDPlusRW.cpp, Line 935
EndDAO: Last written address 357840

12:46:14 AM #30 SPTI -1065 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xF9 06 01 FF 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20

12:46:14 AM #31 Text 0 File DVDR.cpp, Line 7427
Drive: _NEC DVD_RW ND-3500AG
Book Type request [gen]: DVD-ROM, direct update disc
Changing the Book Type was finished with error, return code -1065

12:46:14 AM #32 Text 0 File DVDR.cpp, Line 6834
Drive: _NEC DVD_RW ND-3500AG
Book Type request [NEC]: DVD-ROM, direct update disc
Setting Book Type supported in EEPROM/RAM only

12:46:14 AM #33 Phase 37 File dlgbrnst.cpp, Line 1767
Burn process completed successfully at 4x (5,540 KB/s)

12:46:14 AM #34 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

12:46:17 AM #35 Text 0 File Cdrdrv.cpp, Line 11411
DriveLocker: UnLockVolume completed

12:46:17 AM #36 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs :
0 (Security Option)

Speed disk: Set at 4x
Actual : 1.7 average
Buffer : 44 average 3 to 81%
CPU : 54%
Type : CLV
--
Roy

"Roy" wrote:

> Just noticed a clicking sound emiting from the drive when burning.
>
> --
> Roy
>
>
> "Roy" wrote:
>
> > Sorry for the delay and log......hope it helps.....
> >
> >
> >
> >
> >
> >
> > Windows XP 5.1
> > IA32
> > WinAspi: -
> >
> > NT-SPTI used
> > Nero Version: 7.11.10.0
> > Internal Version: 7, 11, 10, 0
> > (Nero Express)
> > Recorder: <_NEC DVD_RW ND-3500AG> Version: 2.98 - HA 1 TA 0 -
> > 7.11.10.0
> > Adapter driver: <IDE> HA 1
> > Drive buffer : 2048kB
> > Bus Type : default
> > CD-ROM: <_NEC DVD_RW ND-3500AG>Version: 2.98 - HA 1 TA 0 -
> > 7.11.10.0
> > Adapter driver: <IDE> HA 1
> >
> > === Scsi-Device-Map ===
> > CdRomPeripheral : _NEC DVD_RW ND-3500AG atapi Port 0 ID 0
> > DMA: Off
> > DiskPeripheral : HDS722516VLSA80 atapi Port 1 ID 0
> > DMA: On
> >
> > === CDRom-Device-Map ===
> > _NEC DVD_RW ND-3500AG E: CdRom0
> > =======================
> >
> > AutoRun : 0
> > Excluded drive IDs:
> > WriteBufferSize: 83886080 (0) Byte
> > BUFE : 0
> > Physical memory : 2039MB (2088428k

> > Free physical memory: 1357MB (1390280k

> > Memory in use : 33 %
> > Uncached PFiles: 0x0
> > Use Inquiry : 1
> > Global Bus Type: default (0)
> > Check supported media : Disabled (0)
> >
> > 1.8.2010
> > ISO compilation
> > 5

0:06 AM #1 Text 0 File SCSIPTICommands.cpp, Line 450
> > LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
> >
> > 5

0:06 AM #2 Text 0 File Isodoc.cpp, Line 6711
> > Iso document burn settings
> > ------------------------------------------
> > Determine maximum speed : FALSE
> > Simulate : FALSE
> > Write : TRUE
> > Finalize CD : TRUE
> > Multisession : FALSE
> > Burning mode : DAO
> > Mode : 1
> > ISO Level : 1 (Max. of 11 = 8 + 3 char)
> > Character set : ISO 9660
> > Joliet : TRUE
> > Allow pathdepth more than 8 directories : TRUE
> > Allow more than 255 characters in path : TRUE
> > Write ISO9660 ;1 file extensions : TRUE
> >
> > 5

0:06 AM #3 ISO9660GEN -11 File Geniso.cpp, Line 3350
> > First writeable address = 0 (0x00000000)
> >
> > 5

0:06 AM #4 Text 0 File Burncd.cpp, Line 3500
> > Turn on Disc-At-Once, using DVD media
> >
> > 5

0:06 AM #5 Text 0 File FilesystemSettingsValidator.cpp, Line 142
> > FS Settings: using validator 'CUDFSettingsValidatorDVD'
> > ParamMode = 'automatic', changing UDF partition type from 'physical' to
> > 'physical'
> > Changing UDF revision from '1.02' to '1.02'
> >
> > 5

0:06 AM #6 Text 0 File DlgWaitCD.cpp, Line 307
> > Last possible write address on media: 2295103 (510:01.28, 4482M

> > Last address to be written: 361055 ( 80:14.05, 705M

> >
> > 5

0:06 AM #7 Text 0 File DlgWaitCD.cpp, Line 319
> > Write in overburning mode: NO (enabled: CD)
> >
> > 5

0:06 AM #8 Text 0 File DlgWaitCD.cpp, Line 2988
> > Recorder: _NEC DVD_RW ND-3500AG, Media type: DVD+RW
> > Disc Manufacturer ID: <RITEK>, Media Type ID: <004>, Product revision
> > number: 48
> > Disc Application Code: 0, Extended Information Indicators: 1
> >
> > 5

0:06 AM #9 Text 0 File DlgWaitCD.cpp, Line 493
> > >>> Protocol of DlgWaitCD activities: <<<
> > =========================================
> >
> > 5

0:06 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 778
> > Setup items (after recorder preparation)
> > 0: TRM_DATA_MODE1 ()
> > 2 indices, index0 (150) not provided
> > original disc pos #0 + 361056 (361056) = #361056/80:14.6
> > relocatable, disc pos for caching/writing not required/ required
> > -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length
> > 361056 blocks [E: _NEC DVD_RW ND-3500AG]
> > --------------------------------------------------------------
> >
> > 5

0:06 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 979
> > Prepare [E: _NEC DVD_RW ND-3500AG] for write in CUE-sheet-DAO
> > DAO infos:
> > ==========
> > MCN: ""
> > TOCType: 0x00; Session Closed, disc fixated
> > Tracks 1 to 1: Idx 0 Idx 1
> > Next Trk
> > 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0
> > 739442688, ISRC ""
> > DAO layout:
> > ===========
> > ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
> > 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
> > 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
> > 0 | 1 | 1 | 0x41 | 361056 | 0 | 0x00
> > 361056 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
> >
> > 5

0:06 AM #12 Text 0 File SCSIPTICommands.cpp, Line 240
> > SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
> >
> > 5

0:06 AM #13 Text 0 File Burncd.cpp, Line 4286
> > Caching options: cache CDRom or Network-Yes, small files-No (<64K

> >
> > 5

0:06 AM #14 Phase 24 File dlgbrnst.cpp, Line 1767
> > Caching of files started
> >
> > 5

0:06 AM #15 Text 0 File Burncd.cpp, Line 4405
> > Cache writing successful.
> >
> > 5

0:06 AM #16 Phase 25 File dlgbrnst.cpp, Line 1767
> > Caching of files completed
> >
> > 5

0:06 AM #17 Phase 36 File dlgbrnst.cpp, Line 1767
> > Burn process started at 2.4x (3,324 KB/s)
> >
> > 5

0:07 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2726
> > Verifying disc position of item 0 (relocatable, disc pos, no patch infos,
> > orig at #0): write at #0
> >
> > 5

0:07 AM #19 Text 0 File Cdrdrv.cpp, Line 10161
> > ---- Disc Structure: Physical Format Information (00h) ----
> > Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
> > Book Type: DVD+RW (9), Part Version: 1.1x (2)
> > Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)
> > Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer
> > Type: re-writable
> > Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
> > Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW,
> > DVD+R/+RW)
> > End Physical Sector Number of Data Area: 23FB8F h
> > Data in Burst Cutting Area (BCA) does not exist
> > Disc Application Code: 0 / 0 h
> > Extended Information indicators: 1 h
> > Disc Manufacturer ID: RITEK...
> > Media type ID: 004
> > Product revision number: 48
> > Number of Physical format information bytes in use in ADIP up to byte 63:
> > 57
> > Media Specific [16..783]:
> > 00 00 01 52 49 54 45 4B - 00 00 00 30 30 34 30 39 ...RITEK...00409
> > 23 00 9C 81 5C 02 28 00 - 96 8A 70 02 28 00 9C 81 #.Â£.\.(.Ã»Ã¨p.(.Â£.
> > 68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00 h.(...Î±.â‰¡.......
> > 01 00 17 38 00 28 A5 46 - 02 2C 00 2F 94 3A 02 2C ...8.(Ã‘F.,./Ã¶:.,
> > 00 2E A3 3C 02 2C 28 35 - 50 00 20 00 40 20 00 00 ..Ãº<.,(5P...@...
> > 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> > 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> > 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> > 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> > 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> > 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> > 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> > 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> > 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> > 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> > 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> > 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> > 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> > 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> > 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> > 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> > 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> > 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> > 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> > 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> > 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> > 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> > 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> > 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> > 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> > 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> > 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> > 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> > 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> > 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> > 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> > 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> > 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> > 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> > 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> > 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> > 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> > 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> > 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> > 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> > 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> > 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> > 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> >
> > 5

0:07 AM #20 SPTI -1065 File SCSIPassThrough.cpp, Line 181
> > CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
> > Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
> > Sense Code: 0x20
> > Sense Qual: 0x00
> > CDB Data: 0xF9 05 01 FF 00 00 00 00 00 00 00 00
> > Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
> >
> > 5

0:07 AM #21 SPTI -1065 File SCSIPassThrough.cpp, Line 181
> > CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
> > Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
> > Sense Code: 0x20
> > Sense Qual: 0x00
> > CDB Data: 0xF9 04 01 FF 00 00 00 00 00 00 00 00
> > Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
> >
> > 5

0:07 AM #22 Text 0 File DVDR.cpp, Line 7427
> > Drive: _NEC DVD_RW ND-3500AG
> > Book Type request [gen]: DVD-ROM, write to EEPROM
> > Changing the Book Type was finished with error, return code -1065
> >
> > 5

0:07 AM #23 Text 0 File DVDR.cpp, Line 6834
> > Drive: _NEC DVD_RW ND-3500AG
> > Book Type request [NEC]: DVD-ROM
> > Changing the Book Type was finished with error, return code -1065
> >
> > 5

0:07 AM #24 Text 0 File DVDPlusRW.cpp, Line 675
> > Start write address at LBA 0
> > DVD high compatibility mode: Yes
> >
> > 5

0:07 AM #25 Text 0 File ThreadedTransfer.cpp, Line 268
> > Pipe memory size 83836800
> >
> > 5

1:07 AM #26 SPTI -1106 File SCSIPassThrough.cpp, Line 181
> > CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
> > Sense Key: 0x03 (KEY_MEDIUM_ERROR)
> > Sense Code: 0x73
> > Sense Qual: 0x03
> > CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
> > Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03
> > Buffer x074e0040: Len x10000
> > 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> >
> > 5

1:07 AM #27 CDR -1106 File Writer.cpp, Line 306
> > Power calibration error
> > E: _NEC DVD_RW ND-3500AG
> >
> > 5

1:08 AM #28 Text 0 File DVDPlusRW.cpp, Line 935
> > EndDAO: Last written address 0
> >
> > 5

1:09 AM #29 SPTI -1065 File SCSIPassThrough.cpp, Line 181
> > CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
> > Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
> > Sense Code: 0x20
> > Sense Qual: 0x00
> > CDB Data: 0xF9 06 01 FF 00 00 00 00 00 00 00 00
> > Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
> >
> > 5

1:09 AM #30 Text 0 File DVDR.cpp, Line 7427
> > Drive: _NEC DVD_RW ND-3500AG
> > Book Type request [gen]: DVD-ROM, direct update disc
> > Changing the Book Type was finished with error, return code -1065
> >
> > 5

1:09 AM #31 Text 0 File DVDR.cpp, Line 6834
> > Drive: _NEC DVD_RW ND-3500AG
> > Book Type request [NEC]: DVD-ROM, direct update disc
> > Setting Book Type supported in EEPROM/RAM only
> >
> > 5

1:09 AM #32 Phase 38 File dlgbrnst.cpp, Line 1767
> > Burn process failed at 2.4x (3,324 KB/s)
> >
> > 5

1:09 AM #33 Text 0 File SCSIPTICommands.cpp, Line 287
> > SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
> >

I have just deleted and reinstalled dvd drive. The clicking
noise from the burner is no longer present. Below is a new burn and dvd speed
log. Thank you for your help. Roy

roy clayton · Aug 14, 2010

firmware update

Hi,

Went to NEC site, they told me to go to gateway for NEC DVD_RW ND-3500a, version 2.98 . Gateway did not have a newer version. In the meantime I ordered a lens cleaner which should arrive by the 16th Aug. Will reply after cleaning drive. Thank you for your patience.

Roy

Submitted via EggHeadCafe - Software Developer Portal of Choice
Scrolling in WPF Toolkit?s Column Chart
http://www.eggheadcafe.com/tutorial...6/scrolling-in-wpf-toolkits-column-chart.aspx

Roy · Aug 14, 2010

Hi,

Went to NEC site, they told me to go to gateway for NEC DVD_RW ND-3500a,
firmware version 2.98 update. Gateway did not have a newer version. In the
meantime I ordered a lens cleaner which should arrive by the 16th Aug. Will
reply after cleaning drive. Thank you for your patience.
--
Roy

"Roy" wrote:

> I have just deleted and reinstalled dvd drive. The clicking noise
> from the burner is no longer present (one down). Below is a new burn and dvd
> speed log. Thank you for your help. Roy 8-7-10
>
>
>
>
> Windows XP 5.1
> IA32
> WinAspi: -
>
> NT-SPTI used
> Nero Version: 7.11.10.0
> Internal Version: 7, 11, 10, 0
> (Nero Express)
> Recorder: <_NEC DVD_RW ND-3500AG> Version: 2.98 - HA 1 TA 0 -
> 7.11.10.0
> Adapter driver: <IDE> HA 1
> Drive buffer : 2048kB
> Bus Type : default
> CD-ROM: <_NEC DVD_RW ND-3500AG>Version: 2.98 - HA 1 TA 0 -
> 7.11.10.0
> Adapter driver: <IDE> HA 1
>
> === Scsi-Device-Map ===
> CdRomPeripheral : _NEC DVD_RW ND-3500AG atapi Port 0 ID 0
> DMA: Off
> DiskPeripheral : HDS722516VLSA80 atapi Port 1 ID 0
> DMA: On
>
> === CDRom-Device-Map ===
> _NEC DVD_RW ND-3500AG E: CdRom0
> =======================
>
> AutoRun : 1
> Excluded drive IDs:
> WriteBufferSize: 83886080 (0) Byte
> BUFE : 0
> Physical memory : 2039MB (2088428k

> Free physical memory: 1396MB (1429888k

> Memory in use : 31 %
> Uncached PFiles: 0x0
> Use Inquiry : 1
> Global Bus Type: default (0)
> Check supported media : Disabled (0)
>
> 8.8.2010
> ISO compilation
> 12:40:26 AM #1 Text 0 File SCSIPTICommands.cpp, Line 450
> LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
>
> 12:40:26 AM #2 Text 0 File Isodoc.cpp, Line 6711
> Iso document burn settings
> ------------------------------------------
> Determine maximum speed : FALSE
> Simulate : FALSE
> Write : TRUE
> Finalize CD : TRUE
> Multisession : FALSE
> Burning mode : DAO
> Mode : 1
> ISO Level : 1 (Max. of 11 = 8 + 3 char)
> Character set : ISO 9660
> Joliet : TRUE
> Allow pathdepth more than 8 directories : TRUE
> Allow more than 255 characters in path : TRUE
> Write ISO9660 ;1 file extensions : TRUE
>
> 12:40:26 AM #3 ISO9660GEN -11 File Geniso.cpp, Line 3350
> First writeable address = 0 (0x00000000)
>
> 12:40:26 AM #4 Text 0 File Burncd.cpp, Line 3500
> Turn on Disc-At-Once, using DVD media
>
> 12:40:26 AM #5 Text 0 File FilesystemSettingsValidator.cpp, Line 142
> FS Settings: using validator 'CUDFSettingsValidatorDVD'
> ParamMode = 'automatic', changing UDF partition type from 'physical' to
> 'physical'
> Changing UDF revision from '1.02' to '1.02'
>
> 12:40:26 AM #6 Text 0 File DlgWaitCD.cpp, Line 307
> Last possible write address on media: 2295103 (510:01.28, 4482M

> Last address to be written: 357839 ( 79

1.14, 698M

>
> 12:40:26 AM #7 Text 0 File DlgWaitCD.cpp, Line 319
> Write in overburning mode: NO (enabled: CD)
>
> 12:40:26 AM #8 Text 0 File DlgWaitCD.cpp, Line 2988
> Recorder: _NEC DVD_RW ND-3500AG, Media type: DVD+RW
> Disc Manufacturer ID: <INFODISC>, Media Type ID: <A10>, Product revision
> number: 1
> Disc Application Code: 0, Extended Information Indicators: 1
>
> 12:40:26 AM #9 Text 0 File DlgWaitCD.cpp, Line 493
> >>> Protocol of DlgWaitCD activities: <<<
> =========================================
>
> 12:40:26 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 778
> Setup items (after recorder preparation)
> 0: TRM_DATA_MODE1 ()
> 2 indices, index0 (150) not provided
> original disc pos #0 + 357840 (357840) = #357840/79

1.15
> relocatable, disc pos for caching/writing not required/ required
> -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length
> 357840 blocks [E: _NEC DVD_RW ND-3500AG]
> --------------------------------------------------------------
>
> 12:40:26 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 979
> Prepare [E: _NEC DVD_RW ND-3500AG] for write in CUE-sheet-DAO
> DAO infos:
> ==========
> MCN: ""
> TOCType: 0x00; Session Closed, disc fixated
> Tracks 1 to 1: Idx 0 Idx 1
> Next Trk
> 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0
> 732856320, ISRC ""
> DAO layout:
> ===========
> ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
> 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
> 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
> 0 | 1 | 1 | 0x41 | 357840 | 0 | 0x00
> 357840 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
>
> 12:40:26 AM #12 Text 0 File SCSIPTICommands.cpp, Line 240
> SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
>
> 12:40:26 AM #13 Text 0 File Burncd.cpp, Line 4286
> Caching options: cache CDRom or Network-Yes, small files-No (<64K

>
> 12:40:26 AM #14 Phase 24 File dlgbrnst.cpp, Line 1767
> Caching of files started
>
> 12:40:26 AM #15 Text 0 File Burncd.cpp, Line 4405
> Cache writing successful.
>
> 12:40:26 AM #16 Phase 25 File dlgbrnst.cpp, Line 1767
> Caching of files completed
>
> 12:40:26 AM #17 Phase 36 File dlgbrnst.cpp, Line 1767
> Burn process started at 4x (5,540 KB/s)
>
> 12:40:26 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2726
> Verifying disc position of item 0 (relocatable, disc pos, no patch infos,
> orig at #0): write at #0
>
> 12:40:26 AM #19 Text 0 File Cdrdrv.cpp, Line 10161
> ---- Disc Structure: Physical Format Information (00h) ----
> Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
> Book Type: DVD+RW (9), Part Version: 1.1x (2)
> Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)
> Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer
> Type: re-writable
> Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
> Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW,
> DVD+R/+RW)
> End Physical Sector Number of Data Area: 6FFFF h
> Data in Burst Cutting Area (BCA) does not exist
> Disc Application Code: 0 / 0 h
> Extended Information indicators: 1 h
> Disc Manufacturer ID: INFODISC
> Media type ID: A10
> Product revision number: 1
> Number of Physical format information bytes in use in ADIP up to byte 63:
> 57
> Media Specific [16..783]:
> 00 00 01 49 4E 46 4F 44 - 49 53 43 41 31 30 01 39 ...INFODISCA10.9
> 23 00 9C 7C 5C 02 28 00 - 96 7E 70 02 28 00 9C 7B #..|\.(..~p.(..{
> 68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00 h.(.............
> 01 00 17 38 00 28 8B 46 - 02 2C 00 2F 8A 3A 02 2C ...8.(.F.,./.:.,
> 00 2E 8C 3C 02 2C 28 35 - 50 00 20 00 40 20 00 00 ...<.,(5P...@...
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
>
> 12:40:26 AM #20 SPTI -1065 File SCSIPassThrough.cpp, Line 181
> CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
> Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
> Sense Code: 0x20
> Sense Qual: 0x00
> CDB Data: 0xF9 05 01 FF 00 00 00 00 00 00 00 00
> Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
>
> 12:40:26 AM #21 SPTI -1065 File SCSIPassThrough.cpp, Line 181
> CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
> Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
> Sense Code: 0x20
> Sense Qual: 0x00
> CDB Data: 0xF9 04 01 FF 00 00 00 00 00 00 00 00
> Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
>
> 12:40:26 AM #22 Text 0 File DVDR.cpp, Line 7427
> Drive: _NEC DVD_RW ND-3500AG
> Book Type request [gen]: DVD-ROM, write to EEPROM
> Changing the Book Type was finished with error, return code -1065
>
> 12:40:26 AM #23 Text 0 File DVDR.cpp, Line 6834
> Drive: _NEC DVD_RW ND-3500AG
> Book Type request [NEC]: DVD-ROM
> Changing the Book Type was finished with error, return code -1065
>
> 12:40:26 AM #24 Text 0 File DVDPlusRW.cpp, Line 675
> Start write address at LBA 0
> DVD high compatibility mode: Yes
>
> 12:40:26 AM #25 Text 0 File ThreadedTransfer.cpp, Line 268
> Pipe memory size 83836800
>
> 12:45:45 AM #26 Text 0 File WriterStatus.cpp, Line 245
> <E: _NEC DVD_RW ND-3500AG> start writing Lead-Out at LBA 357840 (575D0h),
> length 0 blocks
>
> 12:45:46 AM #27 Text 0 File DVDPlusRW.cpp, Line 900
> Media-Format will be stopped after burning
>
> 12:45:46 AM #28 Phase 127 File dlgbrnst.cpp, Line 1767
> Generating DVD high compatibility borders
>
> 12:46:14 AM #29 Text 0 File DVDPlusRW.cpp, Line 935
> EndDAO: Last written address 357840
>
> 12:46:14 AM #30 SPTI -1065 File SCSIPassThrough.cpp, Line 181
> CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
> Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
> Sense Code: 0x20
> Sense Qual: 0x00
> CDB Data: 0xF9 06 01 FF 00 00 00 00 00 00 00 00
> Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
>
> 12:46:14 AM #31 Text 0 File DVDR.cpp, Line 7427
> Drive: _NEC DVD_RW ND-3500AG
> Book Type request [gen]: DVD-ROM, direct update disc
> Changing the Book Type was finished with error, return code -1065
>
> 12:46:14 AM #32 Text 0 File DVDR.cpp, Line 6834
> Drive: _NEC DVD_RW ND-3500AG
> Book Type request [NEC]: DVD-ROM, direct update disc
> Setting Book Type supported in EEPROM/RAM only
>
> 12:46:14 AM #33 Phase 37 File dlgbrnst.cpp, Line 1767
> Burn process completed successfully at 4x (5,540 KB/s)
>
> 12:46:14 AM #34 Text 0 File SCSIPTICommands.cpp, Line 287
> SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
>
> 12:46:17 AM #35 Text 0 File Cdrdrv.cpp, Line 11411
> DriveLocker: UnLockVolume completed
>
> 12:46:17 AM #36 Text 0 File SCSIPTICommands.cpp, Line 450
> UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
>
>
> Existing drivers:
>
> Registry Keys:
> HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs :
> 0 (Security Option)
>
>

Very slow burn speed...

Roy

Flightless Bird

Roy

Flightless Bird

Paul

Flightless Bird

Paul

Flightless Bird

Jim

Flightless Bird

Twayne

Flightless Bird

Mark Adams

Flightless Bird

Justin

Flightless Bird

Twayne

Flightless Bird

Roy

Flightless Bird

Roy

Flightless Bird

Roy

Flightless Bird

roy clayton

Flightless Bird

Roy

Flightless Bird