1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Stop Error on restart.

Discussion in 'Windows XP' started by Gordie, Feb 2, 2010.

  1. Gordie

    Gordie Flightless Bird

    Hi all,

    I am presently getting this message whenever I reboot:

    Stop: c000021a {fatal system error}
    The windows logon process system process terminated unexpectedly with a
    status of 0xc0000005 (0x00000000 0x00000000).
    The system has been shut down.
    I am running XP Home SP3, RAM 1.5 GHz , CPU 864 MHz and recently installed a
    new Belkin wireless G Adapter ( I have the most up-to-date drivers from the
    Belkin website). It appears to be working fine, but the problem started
    since its installation.
    Anybody know what this might be.

    Thanks in advance.
     
  2. Peter Foldes

    Peter Foldes Flightless Bird

    Gordie

    See the following
    http://aumha.org/a/stop.php#0x21a

    --
    Peter

    Please Reply to Newsgroup for the benefit of others
    Requests for assistance by email can not and will not be acknowledged.

    "Gordie" <gordon.coultonTAKETHISOUT@sympatico.ca> wrote in message
    news:ue7W8RBpKHA.1556@TK2MSFTNGP05.phx.gbl...
    > Hi all,
    >
    > I am presently getting this message whenever I reboot:
    >
    > Stop: c000021a {fatal system error}
    > The windows logon process system process terminated unexpectedly with a status of
    > 0xc0000005 (0x00000000 0x00000000).
    > The system has been shut down.
    > I am running XP Home SP3, RAM 1.5 GHz , CPU 864 MHz and recently installed a new
    > Belkin wireless G Adapter ( I have the most up-to-date drivers from the Belkin
    > website). It appears to be working fine, but the problem started since its
    > installation.
    > Anybody know what this might be.
    >
    > Thanks in advance.
    >
     
  3. Jose

    Jose Flightless Bird

    On Feb 2, 9:31 am, "Gordie" <gordon.coultonTAKETHIS...@sympatico.ca>
    wrote:
    > Hi all,
    >
    > I am presently getting this message whenever I reboot:
    >
    > Stop: c000021a {fatal system error}
    > The windows logon process system process terminated unexpectedly with a
    > status of 0xc0000005 (0x00000000    0x00000000).
    > The system has been shut down.
    > I am running XP Home SP3, RAM 1.5 GHz , CPU 864 MHz and recently installed a
    > new Belkin wireless G Adapter ( I have the most up-to-date drivers from the
    > Belkin website). It appears to be working fine, but the problem started
    > since its installation.
    > Anybody know what this might be.
    >
    > Thanks in advance.


    You installed the new Belkin device and now you have this problem and
    the Belkin device appears to be working fine? Does that mean it
    lights up or something?

    Okay...

    When your system boots next time, start tapping the F8 key until you
    get a menu of boot options.

    Choose Last Known Good Configuration. This is what Windows thinks the
    situation was the last time the system booted successfully.

    http://support.microsoft.com/kb/156669

    If that doesn't do it, boot in Safe Mode with networking - somehow you
    need to boot something, then figure out what is wrong and fix it.

    When you get that far, we need to look at your new hardware
    configuration, so supply the model number of your new Belkin stuff and
    we can decide what to do next.
     
  4. Gordie

    Gordie Flightless Bird

    Thanks, will check it out.


    "Peter Foldes" <okf22@hotmail.com> wrote in message
    news:%236wXJWBpKHA.3792@TK2MSFTNGP06.phx.gbl...
    > Gordie
    >
    > See the following
    > http://aumha.org/a/stop.php#0x21a
    >
    > --
    > Peter
    >
    > Please Reply to Newsgroup for the benefit of others
    > Requests for assistance by email can not and will not be acknowledged.
    >
    > "Gordie" <gordon.coultonTAKETHISOUT@sympatico.ca> wrote in message
    > news:ue7W8RBpKHA.1556@TK2MSFTNGP05.phx.gbl...
    >> Hi all,
    >>
    >> I am presently getting this message whenever I reboot:
    >>
    >> Stop: c000021a {fatal system error}
    >> The windows logon process system process terminated unexpectedly with a
    >> status of 0xc0000005 (0x00000000 0x00000000).
    >> The system has been shut down.
    >> I am running XP Home SP3, RAM 1.5 GHz , CPU 864 MHz and recently
    >> installed a new Belkin wireless G Adapter ( I have the most up-to-date
    >> drivers from the Belkin website). It appears to be working fine, but the
    >> problem started since its installation.
    >> Anybody know what this might be.
    >>
    >> Thanks in advance.
    >>

    >
     
  5. Gordie

    Gordie Flightless Bird

    Model number is F5D7050.
    Thanks.


    "Jose" <jose_ease@yahoo.com> wrote in message
    news:7e1db45d-eb77-4948-92c6-7e55d44c444b@c29g2000yqd.googlegroups.com...
    On Feb 2, 9:31 am, "Gordie" <gordon.coultonTAKETHIS...@sympatico.ca>
    wrote:
    > Hi all,
    >
    > I am presently getting this message whenever I reboot:
    >
    > Stop: c000021a {fatal system error}
    > The windows logon process system process terminated unexpectedly with a
    > status of 0xc0000005 (0x00000000 0x00000000).
    > The system has been shut down.
    > I am running XP Home SP3, RAM 1.5 GHz , CPU 864 MHz and recently installed
    > a
    > new Belkin wireless G Adapter ( I have the most up-to-date drivers from
    > the
    > Belkin website). It appears to be working fine, but the problem started
    > since its installation.
    > Anybody know what this might be.
    >
    > Thanks in advance.


    You installed the new Belkin device and now you have this problem and
    the Belkin device appears to be working fine? Does that mean it
    lights up or something?

    Okay...

    When your system boots next time, start tapping the F8 key until you
    get a menu of boot options.

    Choose Last Known Good Configuration. This is what Windows thinks the
    situation was the last time the system booted successfully.

    http://support.microsoft.com/kb/156669

    If that doesn't do it, boot in Safe Mode with networking - somehow you
    need to boot something, then figure out what is wrong and fix it.

    When you get that far, we need to look at your new hardware
    configuration, so supply the model number of your new Belkin stuff and
    we can decide what to do next.
     

Share This Page