"RonB", thou empty-headed apparition. Die and be damned. Ye brooded:
> You're not the average Windows user than. Let me restate this. The
> exploitability of IE, and the fact that it is so deeply embedded in the
> Windows OS, is another good reason for most Windows users to go to
> Linux.
What a fucking truck-load of mind-altered linuxfuxed-in-the-head shite.
Post your evidence that "the exploitability of IE, and the fact that it
is so deeply embedded in the Windows OS, is" any reason at all for the
average windows user to do anything other than ask, "DUH? WOT?"
You completely fucking stupid, linux-blind tardlet.
Oh, and just in case you're wondering, not that I assume your exceedingly
tiny brain, consisting of no more than the two cells and a single synapse
that it does:
boot@akhenaten:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-17-generic (buildd@crested) (gcc
version 4.4.1 (Ubuntu 4.4.1-4ubuntu
) #54-Ubuntu SMP Thu Dec 10
17:01:44 UTC 2009 (Ubuntu 2.6.31-17.54-generic)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-17-generic
root=UUID=0d58e411-e04c-470e-8f10-bc5f19a6cb8b ro vga=769
crashkernel=384M-2G:64M,2G-:128M quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000090c00 (usable)
[ 0.000000] BIOS-e820: 0000000000090c00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cebc7000 (usable)
[ 0.000000] BIOS-e820: 00000000cebc7000 - 00000000cec5d000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cec5d000 - 00000000cfdd8000 (usable)
[ 0.000000] BIOS-e820: 00000000cfdd8000 - 00000000cfdda000 (reserved)
[ 0.000000] BIOS-e820: 00000000cfdda000 - 00000000cfe8e000 (usable)
[ 0.000000] BIOS-e820: 00000000cfe8e000 - 00000000cfee5000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfee5000 - 00000000cfeeb000 (usable)
[ 0.000000] BIOS-e820: 00000000cfeeb000 - 00000000cfef2000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfef2000 - 00000000cfef3000 (usable)
[ 0.000000] BIOS-e820: 00000000cfef3000 - 00000000cfeff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfeff000 - 00000000cff00000 (usable)
[ 0.000000] BIOS-e820: 00000000cff00000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FF0000000 write-back
[ 0.000000] 3 base 0CFF00000 mask FFFF00000 uncachable
[ 0.000000] 4 base 100000000 mask F00000000 write-back
[ 0.000000] 5 base 200000000 mask F00000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] e820 update range: 00000000cff00000 - 0000000100000000
(usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcff00 max_arch_pfn = 0x400000000
[ 0.000000] e820 update range: 0000000000001000 - 0000000000006000
(usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 0000000000090c00 (usable)
[ 0.000000] modified: 0000000000090c00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000cebc7000 (usable)
[ 0.000000] modified: 00000000cebc7000 - 00000000cec5d000 (ACPI NVS)
[ 0.000000] modified: 00000000cec5d000 - 00000000cfdd8000 (usable)
[ 0.000000] modified: 00000000cfdd8000 - 00000000cfdda000 (reserved)
[ 0.000000] modified: 00000000cfdda000 - 00000000cfe8e000 (usable)
[ 0.000000] modified: 00000000cfe8e000 - 00000000cfee5000 (ACPI NVS)
[ 0.000000] modified: 00000000cfee5000 - 00000000cfeeb000 (usable)
[ 0.000000] modified: 00000000cfeeb000 - 00000000cfef2000 (ACPI data)
[ 0.000000] modified: 00000000cfef2000 - 00000000cfef3000 (usable)
[ 0.000000] modified: 00000000cfef3000 - 00000000cfeff000 (ACPI data)
[ 0.000000] modified: 00000000cfeff000 - 00000000cff00000 (usable)
[ 0.000000] modified: 00000000cff00000 - 00000000d0000000 (reserved)
[ 0.000000] modified: 00000000f0000000 - 00000000f8000000 (reserved)
[ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cff00000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0000000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cff00000 page 4k
[ 0.000000] kernel direct mapping tables up to cff00000 @ 8000-e000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0100000000 - 0230000000 page 2M
[ 0.000000] kernel direct mapping tables up to 230000000 @ c000-16000
[ 0.000000] RAMDISK: 37559000 - 37fefb9d
[ 0.000000] ACPI: RSDP 00000000000fe020 00014 (v00 INTEL )
[ 0.000000] ACPI: RSDT 00000000cfefd038 00054 (v01 INTEL DX38BT
000007D6 01000013)
[ 0.000000] ACPI: FACP 00000000cfefc000 00074 (v01 INTEL DX38BT
000007D6 MSFT 01000013)
[ 0.000000] ACPI: DSDT 00000000cfef7000 040A6 (v01 INTEL DX38BT
000007D6 MSFT 01000013)
[ 0.000000] ACPI: FACS 00000000cfea0000 00040
[ 0.000000] ACPI: APIC 00000000cfef6000 00078 (v01 INTEL DX38BT
000007D6 MSFT 01000013)
[ 0.000000] ACPI: WDDT 00000000cfef5000 00040 (v01 INTEL DX38BT
000007D6 MSFT 01000013)
[ 0.000000] ACPI: MCFG 00000000cfef4000 0003C (v01 INTEL DX38BT
000007D6 MSFT 01000013)
[ 0.000000] ACPI: ASF! 00000000cfef3000 000A6 (v32 INTEL DX38BT
000007D6 MSFT 01000013)
[ 0.000000] ACPI: SSDT 00000000cfeef000 00204 (v01 INTEL CpuPm
000007D6 MSFT 01000013)
[ 0.000000] ACPI: SSDT 00000000cfeee000 001CF (v01 INTEL Cpu0Cst
000007D6 MSFT 01000013)
[ 0.000000] ACPI: SSDT 00000000cfeed000 001CF (v01 INTEL Cpu1Cst
000007D6 MSFT 01000013)
[ 0.000000] ACPI: SSDT 00000000cfeec000 001CF (v01 INTEL Cpu2Cst
000007D6 MSFT 01000013)
[ 0.000000] ACPI: SSDT 00000000cfeeb000 001CF (v01 INTEL Cpu3Cst
000007D6 MSFT 01000013)
[ 0.000000] ACPI: WDTT 00000000cfef0000 002CC (v01 INTEL DX38BT
000007D6 MSFT 01000013)
[ 0.000000] ACPI: ASPT 00000000cfef1000 00034 (v03 INTEL PerfTune
000007D6 MSFT 01000013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000230000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000230000000
[ 0.000000] NODE_DATA [0000000000011000 - 0000000000015fff]
[ 0.000000] bootmap [0000000000016000 - 000000000005bfff] pages 46
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 -
0230000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==>
[0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 00019e4ccc] TEXT DATA BSS ==>
[0001000000 - 00019e4ccc]
[ 0.000000] #3 [0037559000 - 0037fefb9d] RAMDISK ==>
[0037559000 - 0037fefb9d]
[ 0.000000] #4 [0000090c00 - 0000100000] BIOS reserved ==>
[0000090c00 - 0000100000]
[ 0.000000] #5 [00019e5000 - 00019e515e] BRK ==>
[00019e5000 - 00019e515e]
[ 0.000000] #6 [0000008000 - 000000c000] PGTABLE ==>
[0000008000 - 000000c000]
[ 0.000000] #7 [000000c000 - 0000011000] PGTABLE ==>
[000000c000 - 0000011000]
[ 0.000000] found SMP MP-table at [ffff8800000fe200] fe200
[ 0.000000] Reserving 128MB of memory at 32MB for crashkernel (System
RAM: 8960M
[ 0.000000] [ffffea0000000000-ffffea0007bfffff] PMD ->
[ffff880028600000-ffff88002f7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00230000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[9] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x00000090
[ 0.000000] 0: 0x00000100 -> 0x000cebc7
[ 0.000000] 0: 0x000cec5d -> 0x000cfdd8
[ 0.000000] 0: 0x000cfdda -> 0x000cfe8e
[ 0.000000] 0: 0x000cfee5 -> 0x000cfeeb
[ 0.000000] 0: 0x000cfef2 -> 0x000cfef3
[ 0.000000] 0: 0x000cfeff -> 0x000cff00
[ 0.000000] 0: 0x00100000 -> 0x00230000
[ 0.000000] On node 0 totalpages: 2096521
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 123 pages reserved
[ 0.000000] DMA zone: 3800 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833078 pages, LIFO batch
1
[ 0.000000] Normal zone: 17024 pages used for memmap
[ 0.000000] Normal zone: 1228160 pages, LIFO batch
1
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000001000 -
0000000000006000
[ 0.000000] PM: Registered nosave memory: 0000000000090000 -
0000000000091000
[ 0.000000] PM: Registered nosave memory: 0000000000091000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 -
0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cebc7000 -
00000000cec5d000
[ 0.000000] PM: Registered nosave memory: 00000000cfdd8000 -
00000000cfdda000
[ 0.000000] PM: Registered nosave memory: 00000000cfe8e000 -
00000000cfee5000
[ 0.000000] PM: Registered nosave memory: 00000000cfeeb000 -
00000000cfef2000
[ 0.000000] PM: Registered nosave memory: 00000000cfef3000 -
00000000cfeff000
[ 0.000000] PM: Registered nosave memory: 00000000cff00000 -
00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 -
00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 -
00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 -
00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 -
0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap:
d0000000:20000000)
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages at ffff880028035000, static data
90720 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 2065038
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-17-
generic root=UUID=0d58e411-e04c-470e-8f10-bc5f19a6cb8b ro vga=769
crashkernel=384M-2G:64M,2G-:128M quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA -
bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTL
[ 0.000000] Placing 64MB software IO TLB between ffff880020000000 -
ffff880024000000
[ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000
[ 0.000000] Memory: 8050520k/9175040k available (5315k kernel code,
788956k absent, 335564k reserved, 3017k data, 660k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0,
CPUs=4, Nodes=1
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2999.713 MHz processor.
[ 0.000018] Console: colour dummy device 80x25
[ 0.000020] console [tty0] enabled
[ 0.010000] allocated 83886080 bytes of page_cgroup
[ 0.010000] please try 'cgroup_disable=memory' option if you don't
want memory cgroups
[ 0.010009] Calibrating delay loop (skipped), value calculated using
timer frequency.. 5999.42 BogoMIPS (lpj=29997130)
[ 0.010032] Security Framework initialized
[ 0.010048] AppArmor: AppArmor initialized
[ 0.010535] Dentry cache hash table entries: 1048576 (order: 11,
8388608 bytes)
[ 0.013416] Inode-cache hash table entries: 524288 (order: 10, 4194304
bytes)
[ 0.014765] Mount-cache hash table entries: 256
[ 0.014876] Initializing cgroup subsys ns
[ 0.014881] Initializing cgroup subsys cpuacct
[ 0.014883] Initializing cgroup subsys memory
[ 0.014889] Initializing cgroup subsys freezer
[ 0.014890] Initializing cgroup subsys net_cls
[ 0.014901] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.014903] CPU: L2 cache: 6144K
[ 0.014905] CPU 0/0x0 -> Node 0
[ 0.014907] CPU: Physical Processor ID: 0
[ 0.014908] CPU: Processor Core ID: 0
[ 0.014910] mce: CPU supports 6 MCE banks
[ 0.014915] CPU0: Thermal monitoring enabled (TM2)
[ 0.014918] using mwait in idle threads.
[ 0.014919] Performance Counters: Core2 events, Intel PMU driver.
[ 0.014924] ... version: 2
[ 0.014925] ... bit width: 40
[ 0.014926] ... generic counters: 2
[ 0.014927] ... value mask: 000000ffffffffff
[ 0.014928] ... max period: 000000007fffffff
[ 0.014929] ... fixed-purpose counters: 3
[ 0.014930] ... counter mask: 0000000700000003
[ 0.016838] ACPI: Core revision 20090521
[ 0.024918] Setting APIC routing to flat
[ 0.025214] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.124322] CPU0: Intel(R) Core(TM)2 Extreme CPU X9650 @ 3.00GHz
stepping 06
[ 0.130000] Booting processor 1 APIC 0x2 ip 0x6000
[ 0.010000] Initializing CPU#1
[ 0.010000] Calibrating delay using timer specific routine.. 5999.43
BogoMIPS (lpj=29997162)
[ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.010000] CPU: L2 cache: 6144K
[ 0.010000] CPU 1/0x2 -> Node 0
[ 0.010000] CPU: Physical Processor ID: 0
[ 0.010000] CPU: Processor Core ID: 2
[ 0.010000] mce: CPU supports 6 MCE banks
[ 0.010000] CPU1: Thermal monitoring enabled (TM2)
[ 0.010000] x86 PAT enabled: cpu 1, old 0x7040600070406, new
0x7010600070106
[ 0.281523] CPU1: Intel(R) Core(TM)2 Extreme CPU X9650 @ 3.00GHz
stepping 06
[ 0.281531] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.290092] Booting processor 2 APIC 0x1 ip 0x6000
[ 0.010000] Initializing CPU#2
[ 0.010000] Calibrating delay using timer specific routine.. 5999.40
BogoMIPS (lpj=29997012)
[ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.010000] CPU: L2 cache: 6144K
[ 0.010000] CPU 2/0x1 -> Node 0
[ 0.010000] CPU: Physical Processor ID: 0
[ 0.010000] CPU: Processor Core ID: 1
[ 0.010000] mce: CPU supports 6 MCE banks
[ 0.010000] CPU2: Thermal monitoring enabled (TM2)
[ 0.010000] x86 PAT enabled: cpu 2, old 0x7040600070406, new
0x7010600070106
[ 0.451523] CPU2: Intel(R) Core(TM)2 Extreme CPU X9650 @ 3.00GHz
stepping 06
[ 0.451530] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.460087] Booting processor 3 APIC 0x3 ip 0x6000
[ 0.010000] Initializing CPU#3
[ 0.010000] Calibrating delay using timer specific routine.. 5999.41
BogoMIPS (lpj=29997055)
[ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.010000] CPU: L2 cache: 6144K
[ 0.010000] CPU 3/0x3 -> Node 0
[ 0.010000] CPU: Physical Processor ID: 0
[ 0.010000] CPU: Processor Core ID: 3
[ 0.010000] mce: CPU supports 6 MCE banks
[ 0.010000] CPU3: Thermal monitoring enabled (TM2)
[ 0.010000] x86 PAT enabled: cpu 3, old 0x7040600070406, new
0x7010600070106
[ 0.621514] CPU3: Intel(R) Core(TM)2 Extreme CPU X9650 @ 3.00GHz
stepping 06
[ 0.621519] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.630007] Brought up 4 CPUs
[ 0.630009] Total of 4 processors activated (23997.67 BogoMIPS).
[ 0.630055] CPU0 attaching sched-domain:
[ 0.630057] domain 0: span 0,2 level MC
[ 0.630059] groups: 0 2
[ 0.630062] domain 1: span 0-3 level CPU
[ 0.630063] groups: 0,2 1,3
[ 0.630067] CPU1 attaching sched-domain:
[ 0.630068] domain 0: span 1,3 level MC
[ 0.630069] groups: 1 3
[ 0.630072] domain 1: span 0-3 level CPU
[ 0.630073] groups: 1,3 0,2
[ 0.630076] CPU2 attaching sched-domain:
[ 0.630077] domain 0: span 0,2 level MC
[ 0.630079] groups: 2 0
[ 0.630081] domain 1: span 0-3 level CPU
[ 0.630082] groups: 0,2 1,3
[ 0.630085] CPU3 attaching sched-domain:
[ 0.630086] domain 0: span 1,3 level MC
[ 0.630088] groups: 3 1
[ 0.630090] domain 1: span 0-3 level CPU
[ 0.630091] groups: 1,3 0,2
[ 0.630174] Booting paravirtualized kernel on bare hardware
[ 0.630174] regulator: core version 0.5
[ 0.630174] Time: 6:01:28 Date: 01/15/10
[ 0.630174] NET: Registered protocol family 16
[ 0.630174] ACPI: bus type pci registered
[ 0.630209] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0
- 127
[ 0.630211] PCI: MCFG area at f0000000 reserved in E820
[ 0.633719] PCI: Using MMCONFIG at f0000000 - f7ffffff
[ 0.633720] PCI: Using configuration type 1 for base access
[ 0.634288] bio: create slab <bio-0> at 0
[ 0.634288] ACPI: EC: Look up EC in DSDT
[ 0.634288] ACPI: Interpreter enabled
[ 0.634288] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.634288] ACPI: Using IOAPIC for interrupt routing
[ 0.641868] ACPI: No dock devices found.
[ 0.642554] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.642629] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.642631] pci 0000:00:06.0: PME# disabled
[ 0.642676] pci 0000:00:19.0: reg 10 32bit mmio:
[0xe3100000-0xe311ffff]
[ 0.642681] pci 0000:00:19.0: reg 14 32bit mmio:
[0xe3124000-0xe3124fff]
[ 0.642686] pci 0000:00:19.0: reg 18 io port: [0x3400-0x341f]
[ 0.642716] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.642718] pci 0000:00:19.0: PME# disabled
[ 0.642756] pci 0000:00:1a.0: reg 20 io port: [0x30e0-0x30ff]
[ 0.642810] pci 0000:00:1a.1: reg 20 io port: [0x30c0-0x30df]
[ 0.642864] pci 0000:00:1a.2: reg 20 io port: [0x30a0-0x30bf]
[ 0.642921] pci 0000:00:1a.7: reg 10 32bit mmio:
[0xe3125c00-0xe3125fff]
[ 0.642964] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.642968] pci 0000:00:1a.7: PME# disabled
[ 0.643000] pci 0000:00:1b.0: reg 10 64bit mmio:
[0xe3120000-0xe3123fff]
[ 0.643032] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.643035] pci 0000:00:1b.0: PME# disabled
[ 0.643078] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.643081] pci 0000:00:1c.0: PME# disabled
[ 0.643128] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.643131] pci 0000:00:1c.4: PME# disabled
[ 0.643173] pci 0000:00:1d.0: reg 20 io port: [0x3080-0x309f]
[ 0.643227] pci 0000:00:1d.1: reg 20 io port: [0x3060-0x307f]
[ 0.643281] pci 0000:00:1d.2: reg 20 io port: [0x3040-0x305f]
[ 0.643338] pci 0000:00:1d.7: reg 10 32bit mmio:
[0xe3125800-0xe3125bff]
[ 0.643381] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.643385] pci 0000:00:1d.7: PME# disabled
[ 0.643482] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.643486] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6
ACPI/GPIO/TCO
[ 0.643489] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6
GPIO
[ 0.643492] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680
(mask 007f)
[ 0.643495] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0810
(mask 007f)
[ 0.643545] pci 0000:00:1f.2: reg 10 io port: [0x3428-0x342f]
[ 0.643549] pci 0000:00:1f.2: reg 14 io port: [0x3434-0x3437]
[ 0.643553] pci 0000:00:1f.2: reg 18 io port: [0x3420-0x3427]
[ 0.643557] pci 0000:00:1f.2: reg 1c io port: [0x3430-0x3433]
[ 0.643561] pci 0000:00:1f.2: reg 20 io port: [0x3020-0x303f]
[ 0.643566] pci 0000:00:1f.2: reg 24 32bit mmio:
[0xe3125000-0xe31257ff]
[ 0.643589] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.643592] pci 0000:00:1f.2: PME# disabled
[ 0.643613] pci 0000:00:1f.3: reg 10 64bit mmio:
[0xe3126000-0xe31260ff]
[ 0.643624] pci 0000:00:1f.3: reg 20 io port: [0x3000-0x301f]
[ 0.643659] pci 0000:01:00.0: reg 10 32bit mmio:
[0xe2000000-0xe2ffffff]
[ 0.643666] pci 0000:01:00.0: reg 14 64bit mmio:
[0xd0000000-0xdfffffff]
[ 0.643673] pci 0000:01:00.0: reg 1c 64bit mmio:
[0xe0000000-0xe1ffffff]
[ 0.643677] pci 0000:01:00.0: reg 24 io port: [0x2000-0x207f]
[ 0.643681] pci 0000:01:00.0: reg 30 32bit mmio:
[0xfffe0000-0xffffffff]
[ 0.643729] pci 0000:00:06.0: bridge io port: [0x2000-0x2fff]
[ 0.643731] pci 0000:00:06.0: bridge 32bit mmio:
[0xe0000000-0xe2ffffff]
[ 0.643734] pci 0000:00:06.0: bridge 64bit mmio pref:
[0xd0000000-0xdfffffff]
[ 0.643766] pci 0000:00:1c.0: bridge 32bit mmio:
[0xe3200000-0xe32fffff]
[ 0.643806] pci 0000:03:00.0: reg 10 io port: [0x1018-0x101f]
[ 0.643813] pci 0000:03:00.0: reg 14 io port: [0x1024-0x1027]
[ 0.643819] pci 0000:03:00.0: reg 18 io port: [0x1010-0x1017]
[ 0.643826] pci 0000:03:00.0: reg 1c io port: [0x1020-0x1023]
[ 0.643832] pci 0000:03:00.0: reg 20 io port: [0x1000-0x100f]
[ 0.643839] pci 0000:03:00.0: reg 24 32bit mmio:
[0xe3000000-0xe30003ff]
[ 0.643872] pci 0000:03:00.0: supports D1
[ 0.643873] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.643877] pci 0000:03:00.0: PME# disabled
[ 0.643915] pci 0000:00:1c.4: bridge io port: [0x1000-0x1fff]
[ 0.643918] pci 0000:00:1c.4: bridge 32bit mmio:
[0xe3000000-0xe30fffff]
[ 0.643961] pci 0000:00:1e.0: transparent bridge
[ 0.643980] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.644151] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 0.644257] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.644305] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.647092] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.647165] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12)
[ 0.647235] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.647306] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.647376] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12)
[ 0.647446] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.647517] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.647587] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.647697] SCSI subsystem initialized
[ 0.647722] libata version 3.00 loaded.
[ 0.647722] usbcore: registered new interface driver usbfs
[ 0.647722] usbcore: registered new interface driver hub
[ 0.647722] usbcore: registered new device driver usb
[ 0.647722] ACPI: WMI: Mapper loaded
[ 0.647722] PCI: Using ACPI for IRQ routing
[ 0.680016] Bluetooth: Core ver 2.15
[ 0.680048] NET: Registered protocol family 31
[ 0.680048] Bluetooth: HCI device and connection manager initialized
[ 0.680048] Bluetooth: HCI socket layer initialized
[ 0.680048] NetLabel: Initializing
[ 0.680048] NetLabel: domain hash size = 128
[ 0.680048] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.680048] NetLabel: unlabeled traffic allowed by default
[ 0.680164] hpet clockevent registered
[ 0.680167] HPET: 4 timers in total, 0 timers will be used for per-cpu
timer
[ 0.680170] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.680174] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.740006] pnp: PnP ACPI init
[ 0.740013] ACPI: bus type pnp registered
[ 0.741579] pnp: PnP ACPI: found 9 devices
[ 0.741581] ACPI: ACPI bus type pnp unregistered
[ 0.741589] system 00:01: iomem range 0xf0000000-0xf7ffffff has been
reserved
[ 0.741591] system 00:01: iomem range 0xfeb00000-0xfeb03fff has been
reserved
[ 0.741593] system 00:01: iomem range 0xfed13000-0xfed13fff has been
reserved
[ 0.741595] system 00:01: iomem range 0xfed14000-0xfed17fff has been
reserved
[ 0.741596] system 00:01: iomem range 0xfed18000-0xfed18fff has been
reserved
[ 0.741598] system 00:01: iomem range 0xfed19000-0xfed19fff has been
reserved
[ 0.741600] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been
reserved
[ 0.741602] system 00:01: iomem range 0xfed20000-0xfed3ffff has been
reserved
[ 0.741604] system 00:01: iomem range 0xfed45000-0xfed99fff has been
reserved
[ 0.741606] system 00:01: iomem range 0xc0000-0xdffff has been reserved
[ 0.741607] system 00:01: iomem range 0xe0000-0xfffff could not be
reserved
[ 0.741609] system 00:01: iomem range 0xffc00000-0xffffffff could not
be reserved
[ 0.741614] system 00:06: ioport range 0x500-0x53f has been reserved
[ 0.741616] system 00:06: ioport range 0x400-0x47f has been reserved
[ 0.741617] system 00:06: ioport range 0x680-0x6ff has been reserved
[ 0.746237] AppArmor: AppArmor Filesystem Enabled
[ 0.746248] pci 0000:01:00.0: BAR 6: no parent found for of device
[0xfffe0000-0xffffffff]
[ 0.746271] pci 0000:01:00.0: BAR 6: can't allocate mem resource
[0xe0000000-0xdfffffff]
[ 0.746273] pci 0000:00:06.0: PCI bridge, secondary bus 0000:01
[ 0.746275] pci 0000:00:06.0: IO window: 0x2000-0x2fff
[ 0.746278] pci 0000:00:06.0: MEM window: 0xe0000000-0xe2ffffff
[ 0.746280] pci 0000:00:06.0: PREFETCH window:
0x000000d0000000-0x000000dfffffff
[ 0.746283] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.746284] pci 0000:00:1c.0: IO window: disabled
[ 0.746287] pci 0000:00:1c.0: MEM window: 0xe3200000-0xe32fffff
[ 0.746290] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.746293] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
[ 0.746295] pci 0000:00:1c.4: IO window: 0x1000-0x1fff
[ 0.746299] pci 0000:00:1c.4: MEM window: 0xe3000000-0xe30fffff
[ 0.746301] pci 0000:00:1c.4: PREFETCH window: disabled
[ 0.746304] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 0.746305] pci 0000:00:1e.0: IO window: disabled
[ 0.746309] pci 0000:00:1e.0: MEM window: disabled
[ 0.746311] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.746317] alloc irq_desc for 16 on node 0
[ 0.746319] alloc kstat_irqs on node 0
[ 0.746322] pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[ 0.746325] pci 0000:00:06.0: setting latency timer to 64
[ 0.746330] pci 0000:00:1c.0: enabling device (0000 -> 0002)
[ 0.746332] alloc irq_desc for 17 on node 0
[ 0.746333] alloc kstat_irqs on node 0
[ 0.746335] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ
17
[ 0.746338] pci 0000:00:1c.0: setting latency timer to 64
[ 0.746343] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ
17
[ 0.746346] pci 0000:00:1c.4: setting latency timer to 64
[ 0.746350] pci 0000:00:1e.0: setting latency timer to 64
[ 0.746353] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.746355] pci_bus 0000:00: resource 1 mem:
[0x000000-0xffffffffffffffff]
[ 0.746356] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff]
[ 0.746358] pci_bus 0000:01: resource 1 mem: [0xe0000000-0xe2ffffff]
[ 0.746359] pci_bus 0000:01: resource 2 pref mem
[0xd0000000-0xdfffffff]
[ 0.746361] pci_bus 0000:02: resource 1 mem: [0xe3200000-0xe32fffff]
[ 0.746363] pci_bus 0000:03: resource 0 io: [0x1000-0x1fff]
[ 0.746364] pci_bus 0000:03: resource 1 mem: [0xe3000000-0xe30fffff]
[ 0.746366] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 0.746367] pci_bus 0000:04: resource 4 mem:
[0x000000-0xffffffffffffffff]
[ 0.746389] NET: Registered protocol family 2
[ 0.746555] IP route cache hash table entries: 262144 (order: 9,
2097152 bytes)
[ 0.747370] TCP established hash table entries: 524288 (order: 11,
8388608 bytes)
[ 0.749660] TCP bind hash table entries: 65536 (order: 8, 1048576
bytes)
[ 0.750028] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.750030] TCP reno registered
[ 0.750121] NET: Registered protocol family 1
[ 0.750167] Trying to unpack rootfs image as initramfs...
[ 0.920262] Freeing initrd memory: 10842k freed
[ 0.923410] Scanning for low memory corruption every 60 seconds
[ 0.923513] audit: initializing netlink socket (disabled)
[ 0.923525] type=2000 audit(1263535287.919:1): initialized
[ 0.930476] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.931445] VFS: Disk quotas dquot_6.5.2
[ 0.931480] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.931879] fuse init (API version 7.12)
[ 0.931931] msgmni has been set to 15744
[ 0.932119] alg: No test for stdrng (krng)
[ 0.932126] io scheduler noop registered
[ 0.932128] io scheduler anticipatory registered
[ 0.932130] io scheduler deadline registered
[ 0.932154] io scheduler cfq registered (default)
[ 0.932478] pci 0000:01:00.0: Boot video device
[ 0.932567] alloc irq_desc for 24 on node 0
[ 0.932569] alloc kstat_irqs on node 0
[ 0.932576] pcieport-driver 0000:00:06.0: irq 24 for MSI/MSI-X
[ 0.932580] pcieport-driver 0000:00:06.0: setting latency timer to 64
[ 0.932669] alloc irq_desc for 25 on node 0
[ 0.932670] alloc kstat_irqs on node 0
[ 0.932675] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.932681] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.932782] alloc irq_desc for 26 on node 0
[ 0.932783] alloc kstat_irqs on node 0
[ 0.932788] pcieport-driver 0000:00:1c.4: irq 26 for MSI/MSI-X
[ 0.932794] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 0.932863] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.932912] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.932993] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/
input/input0
[ 0.932996] ACPI: Power Button [PWRF]
[ 0.933029] input: Sleep Button as /devices/LNXSYSTM:00/device:00/
PNP0C0E:00/input/input1
[ 0.933034] ACPI: Sleep Button [SLPB]
[ 0.933315] Monitor-Mwait will be used to enter C-1 state
[ 0.933337] processor LNXCPU:00: registered as cooling_device0
[ 0.933339] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.933515] processor LNXCPU:01: registered as cooling_device1
[ 0.933518] ACPI: Processor [CPU2] (supports 8 throttling states)
[ 0.933732] processor LNXCPU:02: registered as cooling_device2
[ 0.933736] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 0.933922] processor LNXCPU:03: registered as cooling_device3
[ 0.933925] ACPI: Processor [CPU3] (supports 8 throttling states)
[ 0.935597] Linux agpgart interface v0.103
[ 0.935603] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.935698] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
[ 0.936423] brd: module loaded
[ 0.936705] loop: module loaded
[ 0.936750] input: Macintosh mouse button emulation as /devices/
virtual/input/input2
[ 0.936822] ahci 0000:00:1f.2: version 3.0
[ 0.936833] alloc irq_desc for 21 on node 0
[ 0.936834] alloc kstat_irqs on node 0
[ 0.936838] ahci 0000:00:1f.2: PCI INT A -> GSI 21 (level, low) -> IRQ
21
[ 0.936862] alloc irq_desc for 27 on node 0
[ 0.936863] alloc kstat_irqs on node 0
[ 0.936868] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
[ 0.936929] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps
0x3f impl RAID mode
[ 0.936932] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum
part ems
[ 0.936934] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.030032] scsi0 : ahci
[ 1.030087] scsi1 : ahci
[ 1.030125] scsi2 : ahci
[ 1.030162] scsi3 : ahci
[ 1.030200] scsi4 : ahci
[ 1.030238] scsi5 : ahci
[ 1.030312] ata1: SATA max UDMA/133 abar m2048@0xe3125000 port
0xe3125100 irq 27
[ 1.030314] ata2: SATA max UDMA/133 irq_stat 0x00400040, connection
status changed irq 27
[ 1.030316] ata3: SATA max UDMA/133 irq_stat 0x00400040, connection
status changed irq 27
[ 1.030318] ata4: SATA max UDMA/133 irq_stat 0x00400040, connection
status changed
[ 1.030320] ata5: SATA max UDMA/133 irq_stat 0x00400040, connection
status changed
[ 1.030322] ata6: SATA max UDMA/133 irq_stat 0x00400040, connection
status changed
[ 1.030656] pata_marvell 0000:03:00.0: PCI INT A -> GSI 16 (level,
low) -> IRQ 16
[ 1.030677] pata_marvell 0000:03:00.0: setting latency timer to 64
[ 1.030723] scsi6 : pata_marvell
[ 1.030764] scsi7 : pata_marvell
[ 1.030785] ata7: PATA max UDMA/100 cmd 0x1018 ctl 0x1024 bmdma 0x1000
irq 16
[ 1.030787] ata8: PATA max UDMA/133 cmd 0x1010 ctl 0x1020 bmdma 0x1008
irq 16
[ 1.031081] Fixed MDIO Bus: probed
[ 1.031105] PPP generic driver version 2.4.2
[ 1.031157] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.031198] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 17 (level, low) ->
IRQ 17
[ 1.031211] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.031215] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.031261] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned
bus number 1
[ 1.035143] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.035148] ehci_hcd 0000:00:1a.7: cache line size of 32 is not
supported
[ 1.035156] ehci_hcd 0000:00:1a.7: irq 17, io mem 0xe3125c00
[ 1.050000] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.050045] usb usb1: configuration #1 chosen from 1 choice
[ 1.050065] hub 1-0:1.0: USB hub found
[ 1.050070] hub 1-0:1.0: 6 ports detected
[ 1.050129] alloc irq_desc for 23 on node 0
[ 1.050130] alloc kstat_irqs on node 0
[ 1.050135] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) ->
IRQ 23
[ 1.050143] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.050145] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.050166] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 2
[ 1.054064] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.054068] ehci_hcd 0000:00:1d.7: cache line size of 32 is not
supported
[ 1.054077] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe3125800
[ 1.070000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.070037] usb usb2: configuration #1 chosen from 1 choice
[ 1.070055] hub 2-0:1.0: USB hub found
[ 1.070060] hub 2-0:1.0: 6 ports detected
[ 1.070103] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.070113] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.070170] alloc irq_desc for 18 on node 0
[ 1.070171] alloc kstat_irqs on node 0
[ 1.070174] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 18 (level, low) ->
IRQ 18
[ 1.070178] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.070180] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.070206] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned
bus number 3
[ 1.070229] uhci_hcd 0000:00:1a.0: irq 18, io base 0x000030e0
[ 1.070280] usb usb3: configuration #1 chosen from 1 choice
[ 1.070296] hub 3-0:1.0: USB hub found
[ 1.070300] hub 3-0:1.0: 2 ports detected
[ 1.070352] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) ->
IRQ 21
[ 1.070356] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.070358] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.070379] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned
bus number 4
[ 1.070402] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000030c0
[ 1.070452] usb usb4: configuration #1 chosen from 1 choice
[ 1.070468] hub 4-0:1.0: USB hub found
[ 1.070473] hub 4-0:1.0: 2 ports detected
[ 1.070529] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 17 (level, low) ->
IRQ 17
[ 1.070533] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.070535] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.070555] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned
bus number 5
[ 1.070573] uhci_hcd 0000:00:1a.2: irq 17, io base 0x000030a0
[ 1.070623] usb usb5: configuration #1 chosen from 1 choice
[ 1.070642] hub 5-0:1.0: USB hub found
[ 1.070646] hub 5-0:1.0: 2 ports detected
[ 1.070697] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) ->
IRQ 23
[ 1.070701] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.070703] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.070725] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 6
[ 1.070743] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080
[ 1.070790] usb usb6: configuration #1 chosen from 1 choice
[ 1.070808] hub 6-0:1.0: USB hub found
[ 1.070813] hub 6-0:1.0: 2 ports detected
[ 1.070860] alloc irq_desc for 19 on node 0
[ 1.070862] alloc kstat_irqs on node 0
[ 1.070864] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) ->
IRQ 19
[ 1.070868] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.070870] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.070893] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 7
[ 1.070917] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060
[ 1.070965] usb usb7: configuration #1 chosen from 1 choice
[ 1.070981] hub 7-0:1.0: USB hub found
[ 1.070986] hub 7-0:1.0: 2 ports detected
[ 1.071036] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) ->
IRQ 18
[ 1.071040] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.071042] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.071062] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 8
[ 1.071080] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040
[ 1.071133] usb usb8: configuration #1 chosen from 1 choice
[ 1.071149] hub 8-0:1.0: USB hub found
[ 1.071153] hub 8-0:1.0: 2 ports detected
[ 1.071216] PNP: No PS/2 controller found. Probing ports directly.
[ 1.074055] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.074058] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.074105] mice: PS/2 mouse device common for all mice
[ 1.074171] rtc_cmos 00:03: RTC can wake from S4
[ 1.074193] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.074212] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 1.074294] device-mapper: uevent: version 1.0.3
[ 1.074345] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01)
initialised:
dm-devel@redhat.com
[ 1.074404] device-mapper: multipath: version 1.1.0 loaded
[ 1.074407] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.074544] cpuidle: using governor ladder
[ 1.074545] cpuidle: using governor menu
[ 1.074805] TCP cubic registered
[ 1.074886] NET: Registered protocol family 10
[ 1.075175] lo: Disabled Privacy Extensions
[ 1.075363] NET: Registered protocol family 17
[ 1.075377] Bluetooth: L2CAP ver 2.13
[ 1.075378] Bluetooth: L2CAP socket layer initialized
[ 1.075381] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.075382] Bluetooth: SCO socket layer initialized
[ 1.075399] Bluetooth: RFCOMM TTY layer initialized
[ 1.075402] Bluetooth: RFCOMM socket layer initialized
[ 1.075403] Bluetooth: RFCOMM ver 1.11
[ 1.075464] PM: Resume from disk failed.
[ 1.075477] registered taskstats version 1
[ 1.075554] Magic number: 10:689:13
[ 1.075606] rtc_cmos 00:03: setting system clock to 2010-01-15
06:01:28 UTC (126353528
[ 1.075608] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.075609] EDD information not available.
[ 1.181531] Switched to high resolution mode on CPU 3
[ 1.181541] Switched to high resolution mode on CPU 2
[ 1.181546] Switched to high resolution mode on CPU 1
[ 1.189996] Switched to high resolution mode on CPU 0
[ 1.560009] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.562709] ata1.00: ATAPI: HL-DT-ST DVDRAM GH20NS10, EL00, max
UDMA/100
[ 1.566677] ata1.00: configured for UDMA/100
[ 1.650004] usb 3-2: new low speed USB device using uhci_hcd and
address 2
[ 1.681292] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GH20NS10
EL00 PQ: 0 ANSI: 5
[ 1.780011] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.780023] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.780034] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.780044] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.780055] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.781240] ata3.00: ATA-6: ST3500320NS, SN04, max UDMA/133
[ 1.781242] ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth
31/32)
[ 1.781387] ata5.00: ATA-8: ST3500320AS, SD15, max UDMA/133
[ 1.781389] ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth
31/32)
[ 1.781649] ata4.00: ATA-8: ST3500320AS, SD1A, max UDMA/133
[ 1.781651] ata4.00: 976773168 sectors, multi 0: LBA48 NCQ (depth
31/32)
[ 1.782850] ata3.00: configured for UDMA/133
[ 1.782968] ata2.00: ATA-7: SAMSUNG SP2504C, VT100-41, max UDMA7
[ 1.782970] ata2.00: 488397168 sectors, multi 0: LBA48 NCQ (depth
31/32)
[ 1.783158] ata5.00: configured for UDMA/133
[ 1.783685] ata4.00: configured for UDMA/133
[ 1.800530] ata6.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[ 1.800532] ata6.00: 976773168 sectors, multi 0: LBA48 NCQ (depth
31/32)
[ 1.802485] ata6.00: configured for UDMA/133
[ 1.804516] ata2.00: configured for UDMA/133
[ 1.835267] usb 3-2: configuration #1 chosen from 1 choice
[ 2.011650] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/
form2 cdda tray
[ 2.011652] Uniform CD-ROM driver Revision: 3.20
[ 2.011711] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 2.011739] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 2.011790] scsi 1:0:0:0: Direct-Access ATA SAMSUNG SP2504C
VT10 PQ: 0 ANSI: 5
[ 2.011857] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 2.011882] sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250
GB/232 Gi
[ 2.011911] sd 1:0:0:0: [sda] Write Protect is off
[ 2.011913] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.011929] sd 1:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.012008] sda:
[ 2.012071] scsi 2:0:0:0: Direct-Access ATA ST3500320NS
SN04 PQ: 0 ANSI: 5
[ 2.012138] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 2.012160] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500
GB/465 Gi
[ 2.012190] sd 2:0:0:0: [sdb] Write Protect is off
[ 2.012192] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.012207] sd 2:0:0:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.012276] sdb:
[ 2.012322] scsi 3:0:0:0: Direct-Access ATA ST3500320AS
SD1A PQ: 0 ANSI: 5
[ 2.012390] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 2.012412] sd 3:0:0:0: [sdc] 976773168 512-byte logical blocks: (500
GB/465 Gi
[ 2.012440] sd 3:0:0:0: [sdc] Write Protect is off
[ 2.012442] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.012457] sd 3:0:0:0: [sdc] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.012549] scsi 4:0:0:0: Direct-Access ATA ST3500320AS
SD15 PQ: 0 ANSI: 5
[ 2.012614] sd 4:0:0:0: Attached scsi generic sg4 type 0
[ 2.012636] sd 4:0:0:0: [sdd] 976773168 512-byte logical blocks: (500
GB/465 Gi
[ 2.012668] sd 4:0:0:0: [sdd] Write Protect is off
[ 2.012670] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 2.012674] scsi 5:0:0:0: Direct-Access ATA SAMSUNG HD501LJ
CR10 PQ: 0 ANSI: 5
[ 2.012694] sd 4:0:0:0: [sdd] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.012770] sd 5:0:0:0: Attached scsi generic sg5 type 0
[ 2.012778] sdd:
[ 2.012797] sd 5:0:0:0: [sde] 976773168 512-byte logical blocks: (500
GB/465 Gi
[ 2.012823] sdc:
[ 2.012832] sd 5:0:0:0: [sde] Write Protect is off
[ 2.012834] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 2.012852] sd 5:0:0:0: [sde] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.012933] sde: sdc1
[ 2.016269] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 2.018778] sda1 sda2 < sdb1
[ 2.019503] sdb: p1 size 2930296832 exceeds device capacity, limited
to end of disk
[ 2.019623] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 2.022500] sdd1
[ 2.022612] sd 4:0:0:0: [sdd] Attached SCSI disk
[ 2.043827] sda5 >
[ 2.043971] sd 1:0:0:0: [sda] Attached SCSI disk
[ 2.078346] sde1
[ 2.078348] sde: p1 size 2930296832 exceeds device capacity, limited
to end of disk
[ 2.078458] sd 5:0:0:0: [sde] Attached SCSI disk
[ 2.110005] usb 8-2: new low speed USB device using uhci_hcd and
address 2
[ 2.291116] usb 8-2: configuration #1 chosen from 1 choice
[ 6.230031] ata7.00: qc timeout (cmd 0x27)
[ 6.230037] ata7.00: failed to read native max address (err_mask=0x4)
[ 16.430030] ata7.00: qc timeout (cmd 0x27)
[ 16.430036] ata7.00: failed to read native max address (err_mask=0x4)
[ 26.630030] ata7.00: qc timeout (cmd 0x27)
[ 26.630036] ata7.00: failed to read native max address (err_mask=0x4)
[ 31.810031] ata7.01: qc timeout (cmd 0x27)
[ 31.810036] ata7.01: failed to read native max address (err_mask=0x4)
[ 41.990030] ata7.01: qc timeout (cmd 0x27)
[ 41.990036] ata7.01: failed to read native max address (err_mask=0x4)
[ 52.170031] ata7.01: qc timeout (cmd 0x27)
[ 52.170036] ata7.01: failed to read native max address (err_mask=0x4)
[ 52.501141] Freeing unused kernel memory: 660k freed
[ 52.501283] Write protecting the kernel read-only data: 7584k
[ 52.562114] ramzswap: disk size set to 2015504 kB
[ 52.577102] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 52.577105] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 52.577167] alloc irq_desc for 20 on node 0
[ 52.577169] alloc kstat_irqs on node 0
[ 52.577175] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) ->
IRQ 20
[ 52.577179] e1000e 0000:00:19.0: pci_enable_pcie_error_reporting
failed 0xfffffffb
[ 52.577182] e1000e 0000:00:19.0: setting latency timer to 64
[ 52.577259] alloc irq_desc for 28 on node 0
[ 52.577260] alloc kstat_irqs on node 0
[ 52.577267] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[ 52.596683] Adding 2015500k swap on /dev/ramzswap0. Priority:100
extents:1 across:2015500k SSD
[ 52.599918] usbcore: registered new interface driver hiddev
[ 52.614549] input: BTC USB Multimedia Keyboard as /devices/
pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input3
[ 52.614595] generic-usb 0003:046D:C313.0001: input,hidraw0: USB HID
v1.10 Keyboard [BTC USB Multimedia Keyboard] on usb-0000:00:1a.0-2/input0
[ 52.658374] input: BTC USB Multimedia Keyboard as /devices/
pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.1/input/input4
[ 52.658445] generic-usb 0003:046D:C313.0002: input,hiddev96,hidraw1:
USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-0000:00:1a.0-2/
input1
[ 52.672562] input: Microsoft Microsoft Basic Optical Mouse as /
devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input5
[ 52.672604] generic-usb 0003:045E:0084.0003: input,hidraw2: USB HID
v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse ] on
usb-0000:00:1d.2-2/input0
[ 52.672615] usbcore: registered new interface driver usbhid
[ 52.672618] usbhid: v2.6:USB HID core driver
[ 52.852319] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1)
00:1c:c0:2e:8a:c3
[ 52.852321] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 52.852342] 0000:00:19.0: eth0: MAC: 7, PHY: 6, PBA No: ffffff-0ff
[ 54.325964] xor: automatically using best checksumming function:
generic_sse
[ 54.372500] generic_sse: 11176.000 MB/sec
[ 54.372502] xor: using function: generic_sse (11176.000 MB/sec)
[ 54.412591] device-mapper: dm-raid45: initialized v0.2594b
[ 55.702563] device-mapper: dm-raid45: /dev/sdb is raid disk 0
[ 55.702565] device-mapper: dm-raid45: /dev/sdc is raid disk 1
[ 55.702566] device-mapper: dm-raid45: /dev/sdd is raid disk 2
[ 55.702568] device-mapper: dm-raid45: /dev/sde is raid disk 3
[ 55.702570] device-mapper: dm-raid45: 128/128/256 sectors chunk/io/
recovery size, 80 stripes
[ 55.702571] algorithm "xor_blocks", 5 chunks with 10462MB/s
[ 55.702572] RAID5 (left asymmetric) set with net 3/4 devices
[ 55.877098] vesafb: framebuffer at 0xe1000000, mapped to
0xffffc90009f00000, using 320k, total 320k
[ 55.877101] vesafb: mode is 640x480x8, linelength=640, pages=0
[ 55.877102] vesafb: scrolling: redraw
[ 55.877104] vesafb: Pseudocolor: size=0:8:8:8, shift=0:0:0:0
[ 55.877141] fb0: VESA VGA frame buffer device
[ 55.880012] Console: switching to colour frame buffer device 80x30
[ 56.080057] PM: Starting manual resume from disk
[ 56.080060] PM: Resume from partition 8:5
[ 56.080061] PM: Checking hibernation image.
[ 56.080185] PM: Resume from disk failed.
[ 56.109754] EXT4-fs (sda1): barriers enabled
[ 56.122902] kjournald2 starting: pid 643, dev sda1:8, commit interval
5 seconds
[ 56.122912] EXT4-fs (sda1): delayed allocation enabled
[ 56.122915] EXT4-fs: file extents enabled
[ 56.132981] EXT4-fs: mballoc enabled
[ 56.132991] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 69.428714] udev: starting version 147
[ 69.445587] lp: driver loaded but no devices found
[ 69.448661] EDAC MC: Ver: 2.1.0 Dec 10 2009
[ 69.449512] EDAC MC0: Giving out device to 'x38_edac' 'x38': DEV
0000:00:00.0
[ 69.450020] Adding 9936160k swap on /dev/sda5. Priority:-1 extents:1
across:9936160k
[ 69.483379] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 69.515510] nvidia: module license 'NVIDIA' taints kernel.
[ 69.515513] Disabling lock debugging due to kernel taint
[ 69.719412] EXT4-fs (sda1): internal journal on sda1:8
[ 69.768567] alloc irq_desc for 22 on node 0
[ 69.768569] alloc kstat_irqs on node 0
[ 69.768575] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -
> IRQ 22
[ 69.768615] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 69.768695] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 69.768699] nvidia 0000:01:00.0: setting latency timer to 64
[ 69.768825] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.36
Fri Aug 14 17
5:21 PDT 2009
[ 69.894930] input: HDA Digital PCBeep as /devices/
pci0000:00/0000:00:1b.0/input/input6
[ 70.360381] input: HDA Intel Line In at Ext Rear Jack as /devices/
pci0000:00/0000:00:1b.0/sound/card0/input7
[ 70.360431] input: HDA Intel Mic at Ext Front Jack as /devices/
pci0000:00/0000:00:1b.0/sound/card0/input8
[ 70.360466] input: HDA Intel Mic at Ext Rear Jack as /devices/
pci0000:00/0000:00:1b.0/sound/card0/input9
[ 70.360503] input: HDA Intel Speaker at Ext Rear Jack as /devices/
pci0000:00/0000:00:1b.0/sound/card0/input10
[ 70.360539] input: HDA Intel Speaker at Ext Rear Jack as /devices/
pci0000:00/0000:00:1b.0/sound/card0/input11
[ 70.360574] input: HDA Intel Speaker at Ext Rear Jack as /devices/
pci0000:00/0000:00:1b.0/sound/card0/input12
[ 70.360610] input: HDA Intel HP Out at Ext Front Jack as /devices/
pci0000:00/0000:00:1b.0/sound/card0/input13
[ 70.380876] type=1505 audit(1263535357.798:2):
operation="profile_load" pid=1344 name=/usr/share/gdm/guest-session/
Xsession
[ 70.382005] type=1505 audit(1263535357.798
):
operation="profile_load" pid=1345 name=/sbin/dhclient3
[ 70.382476] type=1505 audit(1263535357.798:4):
operation="profile_load" pid=1345 name=/usr/lib/NetworkManager/nm-dhcp-
client.action
[ 70.382766] type=1505 audit(1263535357.798:5):
operation="profile_load" pid=1345 name=/usr/lib/connman/scripts/dhclient-
script
[ 70.384901] type=1505 audit(1263535357.808:6):
operation="profile_load" pid=1346 name=/usr/bin/evince
[ 70.392475] type=1505 audit(1263535357.808:7):
operation="profile_load" pid=1346 name=/usr/bin/evince-previewer
[ 70.396930] type=1505 audit(1263535357.818:
:
operation="profile_load" pid=1346 name=/usr/bin/evince-thumbnailer
[ 70.402777] type=1505 audit(1263535357.824:9):
operation="profile_load" pid=1348 name=/usr/bin/freshclam
[ 70.403988] type=1505 audit(1263535357.824:10):
operation="profile_load" pid=1349 name=/usr/lib/cups/backend/cups-pdf
[ 70.404539] type=1505 audit(1263535357.824:11):
operation="profile_load" pid=1349 name=/usr/sbin/cupsd
[ 70.493938] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[ 70.553824] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[ 70.554500] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 72.033816] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow
Control: RX/TX
[ 72.033819] 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 72.034444] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 72.380007] vboxdrv: Trying to deactivate the NMI watchdog
permanently...
[ 72.380010] vboxdrv: Successfully done.
[ 72.380011] vboxdrv: Found 4 processor cores.
[ 72.380053] VBoxDrv: dbg - g_abExecMemory=ffffffffa0b9a280
[ 72.380087] vboxdrv: fAsync=0 offMin=0x345 offMax=0x146d
[ 72.380118] vboxdrv: TSC mode is 'synchronous', kernel timer mode is
'normal'.
[ 72.380120] vboxdrv: Successfully loaded version 3.1.2 (interface
0x00100001).
[ 72.730500] ppdev: user-space parallel port driver
[ 82.572508] eth0: no IPv6 routers present
[ 180.568153] __ratelimit: 6 callbacks suppressed
[ 180.568157] npviewer.bin[2921]: segfault at 46322530 ip
0000000046322530 sp 00000000ff840fbc error 14
[ 318.898934] warning: `VirtualBox' uses 32-bit capabilities (legacy
support in use)
[ 336.125480] device eth0 entered promiscuous mode