• Welcome to Tux Reports: Where Penguins Fly. We hope you find the topics varied, interesting, and worthy of your time. Please become a member and join in the discussions.

scanner button does not work with epson perfection 610

M

Mаrtin

Flightless Bird
I have an epson perfection 610 scanner which works fine. But if I
press the scan button, nothing happens. If I go to the control panel
and open the scanners properties, there is a tab for events.
The only possible event is "start button" and the action is "no
action" and all other radio buttons for selecting an action are greyed
out.
So I cannot choose to be prompted for a program.
Why is this?

Martin
 
P

Penn E. Loafer

Flightless Bird
What did Epson support have to say?

"M?rtin" <KrnBibJtuEsl@spammotel.com> wrote in message
news:30891771-389b-4e70-95b3-cd8414826164@v8g2000yqe.googlegroups.com...
>I have an epson perfection 610 scanner which works fine. But if I
> press the scan button, nothing happens. If I go to the control panel
> and open the scanners properties, there is a tab for events.
> The only possible event is "start button" and the action is "no
> action" and all other radio buttons for selecting an action are greyed
> out.
> So I cannot choose to be prompted for a program.
> Why is this?
>
> Martin
 
C

Chuck

Flightless Bird
On 8/11/2010 3:06 PM, Mаrtin wrote:
> I have an epson perfection 610 scanner which works fine. But if I
> press the scan button, nothing happens. If I go to the control panel
> and open the scanners properties, there is a tab for events.
> The only possible event is "start button" and the action is "no
> action" and all other radio buttons for selecting an action are greyed
> out.
> So I cannot choose to be prompted for a program.
> Why is this?
>
> Martin


Sometimes this is the result of using windows built in scanner software
instead of the appropriate Epson software and drivers.
 
M

Mark Adams

Flightless Bird
"Penn E. Loafer" wrote:

> What did Epson support have to say?
>


Another brilliant post from "Hoop L. Head."

> "M?rtin" <KrnBibJtuEsl@spammotel.com> wrote in message
> news:30891771-389b-4e70-95b3-cd8414826164@v8g2000yqe.googlegroups.com...
> >I have an epson perfection 610 scanner which works fine. But if I
> > press the scan button, nothing happens. If I go to the control panel
> > and open the scanners properties, there is a tab for events.
> > The only possible event is "start button" and the action is "no
> > action" and all other radio buttons for selecting an action are greyed
> > out.
> > So I cannot choose to be prompted for a program.
> > Why is this?
> >
> > Martin

>
>
> .
>
 
P

PA Bear [MS MVP]

Flightless Bird
+1

Penn E. Loafer wrote:
> What did Epson support have to say?
>
> "M?rtin" <KrnBibJtuEsl@spammotel.com> wrote in message
> news:30891771-389b-4e70-95b3-cd8414826164@v8g2000yqe.googlegroups.com...
>> I have an epson perfection 610 scanner which works fine. But if I
>> press the scan button, nothing happens. If I go to the control panel
>> and open the scanners properties, there is a tab for events.
>> The only possible event is "start button" and the action is "no
>> action" and all other radio buttons for selecting an action are greyed
>> out.
>> So I cannot choose to be prompted for a program.
>> Why is this?
>>
>> Martin
 
M

Mаrtin

Flightless Bird

> Sometimes this is the result of using windows built in scanner software
> instead of the appropriate Epson software and drivers.


Sometimes and maybe.
But not in this case.
 
E

Elmo

Flightless Bird
Mаrtin wrote:
> I have an Epson Perfection 610 scanner which works fine. But if I
> press the scan button, nothing happens. If I go to the Control Panel
> and open the scanner's properties, there is a tab for events.
> The only possible event is "Start button" and the action is "no
> action" and all other radio buttons for selecting an action are greyed
> out.
> So I cannot choose to be prompted for a program.
> Why is this?
>
> Martin


"Windows 3.1/95 and NT are not supported."
http://www.epson.com/cgi-bin/Store/...nfoType=FAQ&oid=14559&prodoid=8160&foid=38189

Possibly, the "VueScan software from Hamrick" would work with your
setup. There's a trial version that should let you see whether it's a
viable solution.
http://www.epson.com/cgi-bin/Store/...foType=FAQ&oid=14559&prodoid=8160&foid=133821

The "One Touch" isn't working.
http://www.epson.com/cgi-bin/Store/...nfoType=FAQ&oid=14559&prodoid=8160&foid=38193

--

Joe =o)
 
P

Paul

Flightless Bird
Mаrtin wrote:
>> Sometimes this is the result of using windows built in scanner software
>> instead of the appropriate Epson software and drivers.

>
> Sometimes and maybe.
> But not in this case.


Just grasping at straws, I was looking at es06.inf from the Epson
driver installer package. And it has the following string in it

7D245E24-56C0-11d1-BED9-00AA002F3325

Doing a search on that string, takes me here.

http://www.communitypc.co.uk/Scanning.htm

"Exploit the start button

You have uncovered part of the mechanism by which Windows responds
to a USB still-image device's start button. A program called Stimon.exe
(Still image monitor} sits in memory watching for the device driver to
signal that the button has been pressed Stimon then looks in the
registry; in

HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\StillImage\Registered Applications

to find out which programs are registered as image acquisition handlers.
If there's more than one, the list is presented in a dialog box for you
choose, or it is launched directly. All the program command lines have
a feature in common - they are suffixed with a pair of switches.

Path\to\someprogram.exe

/StiDevice:%1 /StiEvent:%2

These are a generic link to client applications. To add new applications
to the list, try following the same style. The switches definitely won't
work if you add them to a command line in the Start/Run dialog, because
%1 and %2 are placeholders for data, which is filled by Stimon. For instance
on my system, when I press the button and choose an application, the switches
become

/StiDevice:Image\0000

/StiEvent:{7d245e24-56c0-11d1-bed9-00aa002f3325} "

I have no idea what it means, but perhaps there is some mechanism there, for
hooking up your own program to the button. I figured if I looked for that
GUID number, I'd find an article about it.

( ref: http://en.wikipedia.org/wiki/Globally_unique_identifier )

On the virtual machine I tested the Epson driver installation on, the
only thing in the "Registered Applications" registry entry, was a registry key
for AMCAP.exe, which came from a previous webcam installation. I don't see
any new entry put there by Epson. This is the only Registered Application
I've got -

AMCAP REG_SZ C:/windows\AMCAP.EXE /StiDevice:%1 /StiEvent:%2

AMCAP is a simple program for dealing with things like webcams, for test
purposes. Various versions of AMCAP are modified by companies, and included
on their software CD, so you have something to test with.

Paul
 
M

Mаrtin

Flightless Bird
> "Windows 3.1/95 and NT are not supported."http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCook...

I have XP Prof. and the question ist not: why is the start button not
working.
The question is: why are all options in the scanner settings greyed
out so that it is not possible to select "prompt for an application".
 
M

Mаrtin

Flightless Bird
>
>     AMCAP      REG_SZ       C:/windows\AMCAP.EXE /StiDevice:%1 /StiEvent:%2
>


Hi Paul, thanks for that info. AMCAP is in my registry also. But it
does not show up in the events tab of the scanner properties. Also,
all actions in the events tab are greyed out.
 
Top