1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Problem with lkbdhlpr files

Discussion in 'Windows XP' started by Teriel9, Mar 24, 2010.

  1. Teriel9

    Teriel9 Flightless Bird

    In my Event Viewer an error occurs each time I start up "Cannot load file
    "lkbdhlpr"
    I have tried vaious options to get rid of it
    Removed and Reinstalled Logitech Software
    Changed file suffix to .old
    Located and tried to delete registry entry for "Legacy lkbdhlpr" given an
    error "Cannot remove"
    Tried the same thing in safe mode, no change, on reflection, since it is
    called for by windows, safe mode would probably still call for it.

    I note that there are 2 kinds of lkbdhlpr file one is .sys the other is .vxd
    All files with lkbdhlpr in the name have been deleted.
    Can anyone help please
    TIA
    Teriel9
     
  2. Michael

    Michael Flightless Bird

    Teriel9" <terry@teriel-consultants.co.uk> wrote in message
    news:e8nlvv2yKHA.5868@TK2MSFTNGP06.phx.gbl...
    > In my Event Viewer an error occurs each time I start up "Cannot load file
    > "lkbdhlpr"
    > I have tried vaious options to get rid of it
    > Removed and Reinstalled Logitech Software
    > Changed file suffix to .old
    > Located and tried to delete registry entry for "Legacy lkbdhlpr" given an
    > error "Cannot remove"
    > Tried the same thing in safe mode, no change, on reflection, since it is
    > called for by windows, safe mode would probably still call for it.
    >
    > I note that there are 2 kinds of lkbdhlpr file one is .sys the other is
    > .vxd
    > All files with lkbdhlpr in the name have been deleted.
    > Can anyone help please
    > TIA
    > Teriel9


    A google search turned this up.
    1) Go into your system BIOS setup.
    2) Goto Integrated Peripherals.
    3) Change Port 64/60 Emulation to 'Disable'.
    Save and reboot.
    --


    "Don't pick a fight with an old man.
    If he is too old to fight, he'll just kill you."
     
  3. Teneo

    Teneo Flightless Bird

    Does this help?

    http://www.tomshardware.co.uk/forum/90645-35-lkbdhlpr-logitech-keyboard-helper-system



    "Teriel9" <terry@teriel-consultants.co.uk> wrote in message
    news:e8nlvv2yKHA.5868@TK2MSFTNGP06.phx.gbl...
    > In my Event Viewer an error occurs each time I start up "Cannot load file
    > "lkbdhlpr"
    > I have tried vaious options to get rid of it
    > Removed and Reinstalled Logitech Software
    > Changed file suffix to .old
    > Located and tried to delete registry entry for "Legacy lkbdhlpr" given an
    > error "Cannot remove"
    > Tried the same thing in safe mode, no change, on reflection, since it is
    > called for by windows, safe mode would probably still call for it.
    >
    > I note that there are 2 kinds of lkbdhlpr file one is .sys the other is
    > .vxd
    > All files with lkbdhlpr in the name have been deleted.
    > Can anyone help please
    > TIA
    > Teriel9
    >
     
  4. Teriel9

    Teriel9 Flightless Bird

    Thanks Micheal,
    Tried this but do not have Port60/40 emulation in my Integrated peripherals.
    at least I could not find it
    Thanks
    Teriel9


    "Michael" <mdsjhu@gropumail.com> wrote in message
    news:ehsf5G3yKHA.5040@TK2MSFTNGP02.phx.gbl...
    > Teriel9" <terry@teriel-consultants.co.uk> wrote in message
    > news:e8nlvv2yKHA.5868@TK2MSFTNGP06.phx.gbl...
    >> In my Event Viewer an error occurs each time I start up "Cannot load file
    >> "lkbdhlpr"
    >> I have tried vaious options to get rid of it
    >> Removed and Reinstalled Logitech Software
    >> Changed file suffix to .old
    >> Located and tried to delete registry entry for "Legacy lkbdhlpr" given an
    >> error "Cannot remove"
    >> Tried the same thing in safe mode, no change, on reflection, since it is
    >> called for by windows, safe mode would probably still call for it.
    >>
    >> I note that there are 2 kinds of lkbdhlpr file one is .sys the other is
    >> .vxd
    >> All files with lkbdhlpr in the name have been deleted.
    >> Can anyone help please
    >> TIA
    >> Teriel9

    >
    > A google search turned this up.
    > 1) Go into your system BIOS setup.
    > 2) Goto Integrated Peripherals.
    > 3) Change Port 64/60 Emulation to 'Disable'.
    > Save and reboot.
    > --
    >
    >
    > "Don't pick a fight with an old man.
    > If he is too old to fight, he'll just kill you."
    >
    >
     
  5. Teriel9

    Teriel9 Flightless Bird

    Thanks Teneo,
    Tried this as I also found it on google, but it did not work for me
    Thanks for your interest
    Teriel9


    "Teneo" <not@here.com> wrote in message
    news:eSdCJM3yKHA.5936@TK2MSFTNGP04.phx.gbl...
    > Does this help?
    >
    > http://www.tomshardware.co.uk/forum/90645-35-lkbdhlpr-logitech-keyboard-helper-system
    >
    >
    >
    > "Teriel9" <terry@teriel-consultants.co.uk> wrote in message
    > news:e8nlvv2yKHA.5868@TK2MSFTNGP06.phx.gbl...
    >> In my Event Viewer an error occurs each time I start up "Cannot load file
    >> "lkbdhlpr"
    >> I have tried vaious options to get rid of it
    >> Removed and Reinstalled Logitech Software
    >> Changed file suffix to .old
    >> Located and tried to delete registry entry for "Legacy lkbdhlpr" given an
    >> error "Cannot remove"
    >> Tried the same thing in safe mode, no change, on reflection, since it is
    >> called for by windows, safe mode would probably still call for it.
    >>
    >> I note that there are 2 kinds of lkbdhlpr file one is .sys the other is
    >> .vxd
    >> All files with lkbdhlpr in the name have been deleted.
    >> Can anyone help please
    >> TIA
    >> Teriel9
    >>

    >
    >
     
  6. Michael

    Michael Flightless Bird

    Have you checked 'services' to see if there's an entry there you can
    disable?

    --


    "Don't pick a fight with an old man.
    If he is too old to fight, he'll just kill you."


    "Teriel9" <terry@teriel-consultants.co.uk> wrote in message
    news:#0V8h$3yKHA.5040@TK2MSFTNGP02.phx.gbl...
    > Thanks Micheal,
    > Tried this but do not have Port60/40 emulation in my Integrated
    > peripherals. at least I could not find it
    > Thanks
    > Teriel9
    >
    >
    > "Michael" <mdsjhu@gropumail.com> wrote in message
    > news:ehsf5G3yKHA.5040@TK2MSFTNGP02.phx.gbl...
    >> Teriel9" <terry@teriel-consultants.co.uk> wrote in message
    >> news:e8nlvv2yKHA.5868@TK2MSFTNGP06.phx.gbl...
    >>> In my Event Viewer an error occurs each time I start up "Cannot load
    >>> file "lkbdhlpr"
    >>> I have tried vaious options to get rid of it
    >>> Removed and Reinstalled Logitech Software
    >>> Changed file suffix to .old
    >>> Located and tried to delete registry entry for "Legacy lkbdhlpr" given
    >>> an error "Cannot remove"
    >>> Tried the same thing in safe mode, no change, on reflection, since it is
    >>> called for by windows, safe mode would probably still call for it.
    >>>
    >>> I note that there are 2 kinds of lkbdhlpr file one is .sys the other is
    >>> .vxd
    >>> All files with lkbdhlpr in the name have been deleted.
    >>> Can anyone help please
    >>> TIA
    >>> Teriel9

    >>
    >> A google search turned this up.
    >> 1) Go into your system BIOS setup.
    >> 2) Goto Integrated Peripherals.
    >> 3) Change Port 64/60 Emulation to 'Disable'.
    >> Save and reboot.
    >> --
    >>
    >>
    >> "Don't pick a fight with an old man.
    >> If he is too old to fight, he'll just kill you."
    >>
    >>

    >
    >
     
  7. Elmo

    Elmo Flightless Bird

    Teriel9 wrote:
    > In my Event Viewer an error occurs each time I start up "Cannot load file
    > "lkbdhlpr"
    > I have tried various options to get rid of it
    > Removed and Reinstalled Logitech Software
    > Changed file suffix to .old
    > Located and tried to delete registry entry for "Legacy lkbdhlpr" given an
    > error "Cannot remove"
    > Tried the same thing in safe mode, no change, on reflection, since it is
    > called for by windows, safe mode would probably still call for it.
    >
    > I note that there are 2 kinds of lkbdhlpr file one is .sys the other is .vxd
    > All files with lkbdhlpr in the name have been deleted.
    > Can anyone help please
    > TIA
    > Teriel9


    If the file can't be loaded, deleting the file won't help; that would
    assure it's never loaded. Run regedit, do a search for lkbdhlpr and see
    where it's supposed to be located, note the location, press F3 to
    continue the search. Place a copy of the file in the needed locations.

    --
    Joe =o)
     
  8. Jose

    Jose Flightless Bird

    On Mar 24, 12:06 pm, "Teriel9" <te...@teriel-consultants.co.uk> wrote:
    > In my Event Viewer an error occurs each time I start up "Cannot load file
    > "lkbdhlpr"
    > I have tried vaious options to get rid of it
    > Removed and Reinstalled Logitech Software
    > Changed file suffix to .old
    > Located and tried to delete registry entry for "Legacy lkbdhlpr" given an
    > error "Cannot remove"
    > Tried the same thing in safe mode, no change, on reflection, since it is
    > called for by windows, safe mode would probably still call for it.
    >
    > I note that there are 2 kinds of lkbdhlpr file one is .sys the other is .vxd
    > All files with lkbdhlpr in the name have been deleted.
    > Can anyone help please
    > TIA
    > Teriel9


    Is this the same problem you had in 2006?

    If you are seeing error messages, try to post exactly what they say -
    don't try to put it in your own words. Do you really see a message
    that says "Cannot remove" or does it really say something else?

    Did you decide to edit the registry after reading about some solution
    to your issue or is it just a hunch? Do you think it is a good idea
    to backup your registry before you start trying things?

    Before making any changes to your registry by hand or with third party
    tools, be sure to make a backup of the registry first. Here is a link
    to a popular registry backup tool:

    http://www.larshederer.homepage.t-online.de/erunt/

    You have not specified any particulars about your system and your BIOS
    information is unknown, but you can provide that and we can help you
    look up the documentation instead of just guessing what might be. You
    need to also provide the exact message from the Event Log.

    Click Start, Run and in the box enter:

    msinfo32

    Click OK, and when the System Summary info appears, click Edit, Select
    All, Copy and then paste back here.

    There will be some personal information (like System Name and User
    Name), and whatever appears to be private information to you, just
    delete from the pasted information.

    Here is a method to post the specific information about individual
    events.

    To see the Event Viewer logs, click Start, Settings, Control Panel,
    Administrative Tools, Event Viewer.

    A shortcut to Event Viewer is to click Start, Run and in the box
    enter:

    %SystemRoot%\system32\eventvwr.msc /s

    Click OK to launch the Event Viewer.

    The most interesting logs are usually the Application and System.
    Some logs may be almost or completely empty.
    Not every event is a problem, some are informational messages that
    things are working okay and some are warnings.
    No event should defy reasonable explanation.

    Each event is sorted by Date and Time. Errors will have red Xs,
    Warnings will have yellow !s.
    Information messages have white is. Not every Error or Warning event
    means there is a serious issue.
    Some are excusable at startup time when Windows is booting. Try to
    find just the events at the date
    and time around your problem.

    If you double click an event, it will open a Properties windows with
    more information. On the right are
    black up and down arrow buttons to scroll through the open events. The
    third button that looks like
    two pages on top of each other is used to copy the event details to
    your Windows clipboard.

    When you find an interesting event that occurred around the time of
    your issue, click the third button
    under the up and down arrows to copy the details and then you can
    paste the details (right click, Paste
    or CTRL-V) the detail text back here for analysis.

    To get a fresh start on any Event Viewer log, you can choose to clear
    the log (backing up the log is offered),
    then reproduce your issue, then look at just the events around the
    time of your issue.
     
  9. Teriel9

    Teriel9 Flightless Bird

    Yes Micheal Thank you
    Teriel9


    "Michael" <mdsjhu@gropumail.com> wrote in message
    news:72FC6604-FCFC-4061-BEF7-991E889A501B@microsoft.com...
    > Have you checked 'services' to see if there's an entry there you can
    > disable?
    >
    > --
    >
    >
    > "Don't pick a fight with an old man.
    > If he is too old to fight, he'll just kill you."
    >
    >
    > "Teriel9" <terry@teriel-consultants.co.uk> wrote in message
    > news:#0V8h$3yKHA.5040@TK2MSFTNGP02.phx.gbl...
    >> Thanks Micheal,
    >> Tried this but do not have Port60/40 emulation in my Integrated
    >> peripherals. at least I could not find it
    >> Thanks
    >> Teriel9
    >>
    >>
    >> "Michael" <mdsjhu@gropumail.com> wrote in message
    >> news:ehsf5G3yKHA.5040@TK2MSFTNGP02.phx.gbl...
    >>> Teriel9" <terry@teriel-consultants.co.uk> wrote in message
    >>> news:e8nlvv2yKHA.5868@TK2MSFTNGP06.phx.gbl...
    >>>> In my Event Viewer an error occurs each time I start up "Cannot load
    >>>> file "lkbdhlpr"
    >>>> I have tried vaious options to get rid of it
    >>>> Removed and Reinstalled Logitech Software
    >>>> Changed file suffix to .old
    >>>> Located and tried to delete registry entry for "Legacy lkbdhlpr" given
    >>>> an error "Cannot remove"
    >>>> Tried the same thing in safe mode, no change, on reflection, since it
    >>>> is called for by windows, safe mode would probably still call for it.
    >>>>
    >>>> I note that there are 2 kinds of lkbdhlpr file one is .sys the other is
    >>>> .vxd
    >>>> All files with lkbdhlpr in the name have been deleted.
    >>>> Can anyone help please
    >>>> TIA
    >>>> Teriel9
    >>>
    >>> A google search turned this up.
    >>> 1) Go into your system BIOS setup.
    >>> 2) Goto Integrated Peripherals.
    >>> 3) Change Port 64/60 Emulation to 'Disable'.
    >>> Save and reboot.
    >>> --
    >>>
    >>>
    >>> "Don't pick a fight with an old man.
    >>> If he is too old to fight, he'll just kill you."
    >>>
    >>>

    >>
    >>
     
  10. Teriel9

    Teriel9 Flightless Bird

    Hi Elmo,
    Thank you but I have tried placing just where registry asks but no joy.
    Teriel9


    "Elmo" <elmogeek@xxx.invalid> wrote in message
    news:u6S0Gt4yKHA.5036@TK2MSFTNGP02.phx.gbl...
    > Teriel9 wrote:
    >> In my Event Viewer an error occurs each time I start up "Cannot load file
    >> "lkbdhlpr"
    >> I have tried various options to get rid of it
    >> Removed and Reinstalled Logitech Software
    >> Changed file suffix to .old
    >> Located and tried to delete registry entry for "Legacy lkbdhlpr" given an
    >> error "Cannot remove"
    >> Tried the same thing in safe mode, no change, on reflection, since it is
    >> called for by windows, safe mode would probably still call for it.
    >>
    >> I note that there are 2 kinds of lkbdhlpr file one is .sys the other is
    >> .vxd
    >> All files with lkbdhlpr in the name have been deleted.
    >> Can anyone help please
    >> TIA
    >> Teriel9

    >
    > If the file can't be loaded, deleting the file won't help; that would
    > assure it's never loaded. Run regedit, do a search for lkbdhlpr and see
    > where it's supposed to be located, note the location, press F3 to
    > continue the search. Place a copy of the file in the needed locations.
    >
    > --
    > Joe =o)
     
  11. Teriel9

    Teriel9 Flightless Bird

    Thank you Jose,
    I have printed your email and will try what you suggest.
    regards
    Teriel9


    "Jose" <jose_ease@yahoo.com> wrote in message
    news:7d29a487-a79b-4242-993e-c243cf9a145a@q23g2000yqd.googlegroups.com...
    On Mar 24, 12:06 pm, "Teriel9" <te...@teriel-consultants.co.uk> wrote:
    > In my Event Viewer an error occurs each time I start up "Cannot load file
    > "lkbdhlpr"
    > I have tried vaious options to get rid of it
    > Removed and Reinstalled Logitech Software
    > Changed file suffix to .old
    > Located and tried to delete registry entry for "Legacy lkbdhlpr" given an
    > error "Cannot remove"
    > Tried the same thing in safe mode, no change, on reflection, since it is
    > called for by windows, safe mode would probably still call for it.
    >
    > I note that there are 2 kinds of lkbdhlpr file one is .sys the other is
    > .vxd
    > All files with lkbdhlpr in the name have been deleted.
    > Can anyone help please
    > TIA
    > Teriel9


    Is this the same problem you had in 2006?

    If you are seeing error messages, try to post exactly what they say -
    don't try to put it in your own words. Do you really see a message
    that says "Cannot remove" or does it really say something else?

    Did you decide to edit the registry after reading about some solution
    to your issue or is it just a hunch? Do you think it is a good idea
    to backup your registry before you start trying things?

    Before making any changes to your registry by hand or with third party
    tools, be sure to make a backup of the registry first. Here is a link
    to a popular registry backup tool:

    http://www.larshederer.homepage.t-online.de/erunt/

    You have not specified any particulars about your system and your BIOS
    information is unknown, but you can provide that and we can help you
    look up the documentation instead of just guessing what might be. You
    need to also provide the exact message from the Event Log.

    Click Start, Run and in the box enter:

    msinfo32

    Click OK, and when the System Summary info appears, click Edit, Select
    All, Copy and then paste back here.

    There will be some personal information (like System Name and User
    Name), and whatever appears to be private information to you, just
    delete from the pasted information.

    Here is a method to post the specific information about individual
    events.

    To see the Event Viewer logs, click Start, Settings, Control Panel,
    Administrative Tools, Event Viewer.

    A shortcut to Event Viewer is to click Start, Run and in the box
    enter:

    %SystemRoot%\system32\eventvwr.msc /s

    Click OK to launch the Event Viewer.

    The most interesting logs are usually the Application and System.
    Some logs may be almost or completely empty.
    Not every event is a problem, some are informational messages that
    things are working okay and some are warnings.
    No event should defy reasonable explanation.

    Each event is sorted by Date and Time. Errors will have red Xs,
    Warnings will have yellow !s.
    Information messages have white is. Not every Error or Warning event
    means there is a serious issue.
    Some are excusable at startup time when Windows is booting. Try to
    find just the events at the date
    and time around your problem.

    If you double click an event, it will open a Properties windows with
    more information. On the right are
    black up and down arrow buttons to scroll through the open events. The
    third button that looks like
    two pages on top of each other is used to copy the event details to
    your Windows clipboard.

    When you find an interesting event that occurred around the time of
    your issue, click the third button
    under the up and down arrows to copy the details and then you can
    paste the details (right click, Paste
    or CTRL-V) the detail text back here for analysis.

    To get a fresh start on any Event Viewer log, you can choose to clear
    the log (backing up the log is offered),
    then reproduce your issue, then look at just the events around the
    time of your issue.
     
  12. Michael

    Michael Flightless Bird

    Did it work?

    --


    "Don't pick a fight with an old man.
    If he is too old to fight, he'll just kill you."


    "Teriel9" <terry@teriel-consultants.co.uk> wrote in message
    news:euBnsOBzKHA.5332@TK2MSFTNGP02.phx.gbl...
    > Yes Micheal Thank you
    > Teriel9
    >
    >
    > "Michael" <mdsjhu@gropumail.com> wrote in message
    > news:72FC6604-FCFC-4061-BEF7-991E889A501B@microsoft.com...
    >> Have you checked 'services' to see if there's an entry there you can
    >> disable?
    >>
    >> --
    >>
    >>
    >> "Don't pick a fight with an old man.
    >> If he is too old to fight, he'll just kill you."
    >>
    >>
    >> "Teriel9" <terry@teriel-consultants.co.uk> wrote in message
    >> news:#0V8h$3yKHA.5040@TK2MSFTNGP02.phx.gbl...
    >>> Thanks Micheal,
    >>> Tried this but do not have Port60/40 emulation in my Integrated
    >>> peripherals. at least I could not find it
    >>> Thanks
    >>> Teriel9
    >>>
    >>>
    >>> "Michael" <mdsjhu@gropumail.com> wrote in message
    >>> news:ehsf5G3yKHA.5040@TK2MSFTNGP02.phx.gbl...
    >>>> Teriel9" <terry@teriel-consultants.co.uk> wrote in message
    >>>> news:e8nlvv2yKHA.5868@TK2MSFTNGP06.phx.gbl...
    >>>>> In my Event Viewer an error occurs each time I start up "Cannot load
    >>>>> file "lkbdhlpr"
    >>>>> I have tried vaious options to get rid of it
    >>>>> Removed and Reinstalled Logitech Software
    >>>>> Changed file suffix to .old
    >>>>> Located and tried to delete registry entry for "Legacy lkbdhlpr" given
    >>>>> an error "Cannot remove"
    >>>>> Tried the same thing in safe mode, no change, on reflection, since it
    >>>>> is called for by windows, safe mode would probably still call for it.
    >>>>>
    >>>>> I note that there are 2 kinds of lkbdhlpr file one is .sys the other
    >>>>> is .vxd
    >>>>> All files with lkbdhlpr in the name have been deleted.
    >>>>> Can anyone help please
    >>>>> TIA
    >>>>> Teriel9
    >>>>
    >>>> A google search turned this up.
    >>>> 1) Go into your system BIOS setup.
    >>>> 2) Goto Integrated Peripherals.
    >>>> 3) Change Port 64/60 Emulation to 'Disable'.
    >>>> Save and reboot.
    >>>> --
    >>>>
    >>>>
    >>>> "Don't pick a fight with an old man.
    >>>> If he is too old to fight, he'll just kill you."
    >>>>
    >>>>
    >>>
    >>>

    >
    >
     
  13. Teriel9

    Teriel9 Flightless Bird

    Michael
    Regret no
    Teriel9

    "Michael" <mdsjhu@gropumail.com> wrote in message
    news:%23BZjMSCzKHA.244@TK2MSFTNGP06.phx.gbl...
    > Did it work?
    >
    > --
    >
    >
    > "Don't pick a fight with an old man.
    > If he is too old to fight, he'll just kill you."
    >
    >
    > "Teriel9" <terry@teriel-consultants.co.uk> wrote in message
    > news:euBnsOBzKHA.5332@TK2MSFTNGP02.phx.gbl...
    >> Yes Micheal Thank you
    >> Teriel9
    >>
    >>
    >> "Michael" <mdsjhu@gropumail.com> wrote in message
    >> news:72FC6604-FCFC-4061-BEF7-991E889A501B@microsoft.com...
    >>> Have you checked 'services' to see if there's an entry there you can
    >>> disable?
    >>>
    >>> --
    >>>
    >>>
    >>> "Don't pick a fight with an old man.
    >>> If he is too old to fight, he'll just kill you."
    >>>
    >>>
    >>> "Teriel9" <terry@teriel-consultants.co.uk> wrote in message
    >>> news:#0V8h$3yKHA.5040@TK2MSFTNGP02.phx.gbl...
    >>>> Thanks Micheal,
    >>>> Tried this but do not have Port60/40 emulation in my Integrated
    >>>> peripherals. at least I could not find it
    >>>> Thanks
    >>>> Teriel9
    >>>>
    >>>>
    >>>> "Michael" <mdsjhu@gropumail.com> wrote in message
    >>>> news:ehsf5G3yKHA.5040@TK2MSFTNGP02.phx.gbl...
    >>>>> Teriel9" <terry@teriel-consultants.co.uk> wrote in message
    >>>>> news:e8nlvv2yKHA.5868@TK2MSFTNGP06.phx.gbl...
    >>>>>> In my Event Viewer an error occurs each time I start up "Cannot load
    >>>>>> file "lkbdhlpr"
    >>>>>> I have tried vaious options to get rid of it
    >>>>>> Removed and Reinstalled Logitech Software
    >>>>>> Changed file suffix to .old
    >>>>>> Located and tried to delete registry entry for "Legacy lkbdhlpr"
    >>>>>> given an error "Cannot remove"
    >>>>>> Tried the same thing in safe mode, no change, on reflection, since it
    >>>>>> is called for by windows, safe mode would probably still call for it.
    >>>>>>
    >>>>>> I note that there are 2 kinds of lkbdhlpr file one is .sys the other
    >>>>>> is .vxd
    >>>>>> All files with lkbdhlpr in the name have been deleted.
    >>>>>> Can anyone help please
    >>>>>> TIA
    >>>>>> Teriel9
    >>>>>
    >>>>> A google search turned this up.
    >>>>> 1) Go into your system BIOS setup.
    >>>>> 2) Goto Integrated Peripherals.
    >>>>> 3) Change Port 64/60 Emulation to 'Disable'.
    >>>>> Save and reboot.
    >>>>> --
    >>>>>
    >>>>>
    >>>>> "Don't pick a fight with an old man.
    >>>>> If he is too old to fight, he'll just kill you."
    >>>>>
    >>>>>
    >>>>
    >>>>

    >>
    >>
     
  14. Teriel9

    Teriel9 Flightless Bird

    Hi Jose,
    Have copied and saved as suggested and attached.
    Also attached is an error in the "Application" section re"Server service,
    however on checking running services the "Server" service is in fact
    running.
    Back to lkbdhlpr, The event which shows this error is actually the very 1st
    event recorded on each startup, so it is difficult to see how it can be
    affected by another event.
    Thank you for your tip re registry, I have downloaded and used ERUNT.
    Regards
    Teriel9


    "Jose" <jose_ease@yahoo.com> wrote in message
    news:7d29a487-a79b-4242-993e-c243cf9a145a@q23g2000yqd.googlegroups.com...
    On Mar 24, 12:06 pm, "Teriel9" <te...@teriel-consultants.co.uk> wrote:
    > In my Event Viewer an error occurs each time I start up "Cannot load file
    > "lkbdhlpr"
    > I have tried vaious options to get rid of it
    > Removed and Reinstalled Logitech Software
    > Changed file suffix to .old
    > Located and tried to delete registry entry for "Legacy lkbdhlpr" given an
    > error "Cannot remove"
    > Tried the same thing in safe mode, no change, on reflection, since it is
    > called for by windows, safe mode would probably still call for it.
    >
    > I note that there are 2 kinds of lkbdhlpr file one is .sys the other is
    > .vxd
    > All files with lkbdhlpr in the name have been deleted.
    > Can anyone help please
    > TIA
    > Teriel9


    Is this the same problem you had in 2006?

    If you are seeing error messages, try to post exactly what they say -
    don't try to put it in your own words. Do you really see a message
    that says "Cannot remove" or does it really say something else?

    Did you decide to edit the registry after reading about some solution
    to your issue or is it just a hunch? Do you think it is a good idea
    to backup your registry before you start trying things?

    Before making any changes to your registry by hand or with third party
    tools, be sure to make a backup of the registry first. Here is a link
    to a popular registry backup tool:

    http://www.larshederer.homepage.t-online.de/erunt/

    You have not specified any particulars about your system and your BIOS
    information is unknown, but you can provide that and we can help you
    look up the documentation instead of just guessing what might be. You
    need to also provide the exact message from the Event Log.

    Click Start, Run and in the box enter:

    msinfo32

    Click OK, and when the System Summary info appears, click Edit, Select
    All, Copy and then paste back here.

    There will be some personal information (like System Name and User
    Name), and whatever appears to be private information to you, just
    delete from the pasted information.

    Here is a method to post the specific information about individual
    events.

    To see the Event Viewer logs, click Start, Settings, Control Panel,
    Administrative Tools, Event Viewer.

    A shortcut to Event Viewer is to click Start, Run and in the box
    enter:

    %SystemRoot%\system32\eventvwr.msc /s

    Click OK to launch the Event Viewer.

    The most interesting logs are usually the Application and System.
    Some logs may be almost or completely empty.
    Not every event is a problem, some are informational messages that
    things are working okay and some are warnings.
    No event should defy reasonable explanation.

    Each event is sorted by Date and Time. Errors will have red Xs,
    Warnings will have yellow !s.
    Information messages have white is. Not every Error or Warning event
    means there is a serious issue.
    Some are excusable at startup time when Windows is booting. Try to
    find just the events at the date
    and time around your problem.

    If you double click an event, it will open a Properties windows with
    more information. On the right are
    black up and down arrow buttons to scroll through the open events. The
    third button that looks like
    two pages on top of each other is used to copy the event details to
    your Windows clipboard.

    When you find an interesting event that occurred around the time of
    your issue, click the third button
    under the up and down arrows to copy the details and then you can
    paste the details (right click, Paste
    or CTRL-V) the detail text back here for analysis.

    To get a fresh start on any Event Viewer log, you can choose to clear
    the log (backing up the log is offered),
    then reproduce your issue, then look at just the events around the
    time of your issue.
     
  15. Michael

    Michael Flightless Bird

    Have you contacted Logitech about this? They have forums that are pretty
    informative.

    --


    "Don't pick a fight with an old man.
    If he is too old to fight, he'll just kill you."


    "Teriel9" <terry@teriel-consultants.co.uk> wrote in message
    news:ehpL9JDzKHA.5940@TK2MSFTNGP02.phx.gbl...
    > Michael
    > Regret no
    > Teriel9
    >
    > "Michael" <mdsjhu@gropumail.com> wrote in message
    > news:%23BZjMSCzKHA.244@TK2MSFTNGP06.phx.gbl...
    >> Did it work?
    >>
    >> --
    >>
    >>
    >> "Don't pick a fight with an old man.
    >> If he is too old to fight, he'll just kill you."
    >>
    >>
    >> "Teriel9" <terry@teriel-consultants.co.uk> wrote in message
    >> news:euBnsOBzKHA.5332@TK2MSFTNGP02.phx.gbl...
    >>> Yes Micheal Thank you
    >>> Teriel9
    >>>
    >>>
    >>> "Michael" <mdsjhu@gropumail.com> wrote in message
    >>> news:72FC6604-FCFC-4061-BEF7-991E889A501B@microsoft.com...
    >>>> Have you checked 'services' to see if there's an entry there you can
    >>>> disable?
    >>>>
    >>>> --
    >>>>
    >>>>
    >>>> "Don't pick a fight with an old man.
    >>>> If he is too old to fight, he'll just kill you."
    >>>>
    >>>>
    >>>> "Teriel9" <terry@teriel-consultants.co.uk> wrote in message
    >>>> news:#0V8h$3yKHA.5040@TK2MSFTNGP02.phx.gbl...
    >>>>> Thanks Micheal,
    >>>>> Tried this but do not have Port60/40 emulation in my Integrated
    >>>>> peripherals. at least I could not find it
    >>>>> Thanks
    >>>>> Teriel9
    >>>>>
    >>>>>
    >>>>> "Michael" <mdsjhu@gropumail.com> wrote in message
    >>>>> news:ehsf5G3yKHA.5040@TK2MSFTNGP02.phx.gbl...
    >>>>>> Teriel9" <terry@teriel-consultants.co.uk> wrote in message
    >>>>>> news:e8nlvv2yKHA.5868@TK2MSFTNGP06.phx.gbl...
    >>>>>>> In my Event Viewer an error occurs each time I start up "Cannot load
    >>>>>>> file "lkbdhlpr"
    >>>>>>> I have tried vaious options to get rid of it
    >>>>>>> Removed and Reinstalled Logitech Software
    >>>>>>> Changed file suffix to .old
    >>>>>>> Located and tried to delete registry entry for "Legacy lkbdhlpr"
    >>>>>>> given an error "Cannot remove"
    >>>>>>> Tried the same thing in safe mode, no change, on reflection, since
    >>>>>>> it is called for by windows, safe mode would probably still call for
    >>>>>>> it.
    >>>>>>>
    >>>>>>> I note that there are 2 kinds of lkbdhlpr file one is .sys the other
    >>>>>>> is .vxd
    >>>>>>> All files with lkbdhlpr in the name have been deleted.
    >>>>>>> Can anyone help please
    >>>>>>> TIA
    >>>>>>> Teriel9
    >>>>>>
    >>>>>> A google search turned this up.
    >>>>>> 1) Go into your system BIOS setup.
    >>>>>> 2) Goto Integrated Peripherals.
    >>>>>> 3) Change Port 64/60 Emulation to 'Disable'.
    >>>>>> Save and reboot.
    >>>>>> --
    >>>>>>
    >>>>>>
    >>>>>> "Don't pick a fight with an old man.
    >>>>>> If he is too old to fight, he'll just kill you."
    >>>>>>
    >>>>>>
    >>>>>
    >>>>>
    >>>
    >>>

    >
    >
     
  16. Teriel9

    Teriel9 Flightless Bird

    Hi Michael,
    I have tried but my search for "lkbdhlpr" revealed nothing.
    Thanks
    Teriel9


    "Michael" <mdsjhu@gropumail.com> wrote in message
    news:%23v5AANDzKHA.2436@TK2MSFTNGP04.phx.gbl...
    > Have you contacted Logitech about this? They have forums that are pretty
    > informative.
    >
    > --
    >
    >
    > "Don't pick a fight with an old man.
    > If he is too old to fight, he'll just kill you."
    >
    >
    > "Teriel9" <terry@teriel-consultants.co.uk> wrote in message
    > news:ehpL9JDzKHA.5940@TK2MSFTNGP02.phx.gbl...
    >> Michael
    >> Regret no
    >> Teriel9
    >>
    >> "Michael" <mdsjhu@gropumail.com> wrote in message
    >> news:%23BZjMSCzKHA.244@TK2MSFTNGP06.phx.gbl...
    >>> Did it work?
    >>>
    >>> --
    >>>
    >>>
    >>> "Don't pick a fight with an old man.
    >>> If he is too old to fight, he'll just kill you."
    >>>
    >>>
    >>> "Teriel9" <terry@teriel-consultants.co.uk> wrote in message
    >>> news:euBnsOBzKHA.5332@TK2MSFTNGP02.phx.gbl...
    >>>> Yes Micheal Thank you
    >>>> Teriel9
    >>>>
    >>>>
    >>>> "Michael" <mdsjhu@gropumail.com> wrote in message
    >>>> news:72FC6604-FCFC-4061-BEF7-991E889A501B@microsoft.com...
    >>>>> Have you checked 'services' to see if there's an entry there you can
    >>>>> disable?
    >>>>>
    >>>>> --
    >>>>>
    >>>>>
    >>>>> "Don't pick a fight with an old man.
    >>>>> If he is too old to fight, he'll just kill you."
    >>>>>
    >>>>>
    >>>>> "Teriel9" <terry@teriel-consultants.co.uk> wrote in message
    >>>>> news:#0V8h$3yKHA.5040@TK2MSFTNGP02.phx.gbl...
    >>>>>> Thanks Micheal,
    >>>>>> Tried this but do not have Port60/40 emulation in my Integrated
    >>>>>> peripherals. at least I could not find it
    >>>>>> Thanks
    >>>>>> Teriel9
    >>>>>>
    >>>>>>
    >>>>>> "Michael" <mdsjhu@gropumail.com> wrote in message
    >>>>>> news:ehsf5G3yKHA.5040@TK2MSFTNGP02.phx.gbl...
    >>>>>>> Teriel9" <terry@teriel-consultants.co.uk> wrote in message
    >>>>>>> news:e8nlvv2yKHA.5868@TK2MSFTNGP06.phx.gbl...
    >>>>>>>> In my Event Viewer an error occurs each time I start up "Cannot
    >>>>>>>> load file "lkbdhlpr"
    >>>>>>>> I have tried vaious options to get rid of it
    >>>>>>>> Removed and Reinstalled Logitech Software
    >>>>>>>> Changed file suffix to .old
    >>>>>>>> Located and tried to delete registry entry for "Legacy lkbdhlpr"
    >>>>>>>> given an error "Cannot remove"
    >>>>>>>> Tried the same thing in safe mode, no change, on reflection, since
    >>>>>>>> it is called for by windows, safe mode would probably still call
    >>>>>>>> for it.
    >>>>>>>>
    >>>>>>>> I note that there are 2 kinds of lkbdhlpr file one is .sys the
    >>>>>>>> other is .vxd
    >>>>>>>> All files with lkbdhlpr in the name have been deleted.
    >>>>>>>> Can anyone help please
    >>>>>>>> TIA
    >>>>>>>> Teriel9
    >>>>>>>
    >>>>>>> A google search turned this up.
    >>>>>>> 1) Go into your system BIOS setup.
    >>>>>>> 2) Goto Integrated Peripherals.
    >>>>>>> 3) Change Port 64/60 Emulation to 'Disable'.
    >>>>>>> Save and reboot.
    >>>>>>> --
    >>>>>>>
    >>>>>>>
    >>>>>>> "Don't pick a fight with an old man.
    >>>>>>> If he is too old to fight, he'll just kill you."
    >>>>>>>
    >>>>>>>
    >>>>>>
    >>>>>>
    >>>>
    >>>>

    >>
    >>
     
  17. Jose

    Jose Flightless Bird

    On Mar 25, 11:53 am, "Michael" <mds...@gropumail.com> wrote:
    > Have you contacted Logitech about this?  They have forums that are pretty
    > informative.
    >
    > --
    >
    > "Don't pick a fight with an old man.
    > If he is too old to fight, he'll just kill you."
    >
    > "Teriel9" <te...@teriel-consultants.co.uk> wrote in message
    >
    > news:ehpL9JDzKHA.5940@TK2MSFTNGP02.phx.gbl...
    >
    >
    >
    > > Michael
    > > Regret no
    > > Teriel9

    >
    > > "Michael" <mds...@gropumail.com> wrote in message
    > >news:%23BZjMSCzKHA.244@TK2MSFTNGP06.phx.gbl...
    > >> Did it work?

    >
    > >> --

    >
    > >> "Don't pick a fight with an old man.
    > >> If he is too old to fight, he'll just kill you."

    >
    > >> "Teriel9" <te...@teriel-consultants.co.uk> wrote in message
    > >>news:euBnsOBzKHA.5332@TK2MSFTNGP02.phx.gbl...
    > >>> Yes Micheal Thank you
    > >>> Teriel9

    >
    > >>> "Michael" <mds...@gropumail.com> wrote in message
    > >>>news:72FC6604-FCFC-4061-BEF7-991E889A501B@microsoft.com...
    > >>>> Have you checked 'services' to see if there's an entry there you can
    > >>>> disable?

    >
    > >>>> --

    >
    > >>>> "Don't pick a fight with an old man.
    > >>>> If he is too old to fight, he'll just kill you."

    >
    > >>>> "Teriel9" <te...@teriel-consultants.co.uk> wrote in message
    > >>>>news:#0V8h$3yKHA.5040@TK2MSFTNGP02.phx.gbl...
    > >>>>> Thanks Micheal,
    > >>>>> Tried this but do not have Port60/40 emulation in my Integrated
    > >>>>> peripherals. at least I could not find it
    > >>>>> Thanks
    > >>>>> Teriel9

    >
    > >>>>> "Michael" <mds...@gropumail.com> wrote in message
    > >>>>>news:ehsf5G3yKHA.5040@TK2MSFTNGP02.phx.gbl...
    > >>>>>> Teriel9" <te...@teriel-consultants.co.uk> wrote in message
    > >>>>>>news:e8nlvv2yKHA.5868@TK2MSFTNGP06.phx.gbl...
    > >>>>>>> In my Event Viewer an error occurs each time I start up "Cannot load
    > >>>>>>> file "lkbdhlpr"
    > >>>>>>> I have tried vaious options to get rid of it
    > >>>>>>> Removed and Reinstalled Logitech Software
    > >>>>>>> Changed file suffix to .old
    > >>>>>>> Located and tried to delete registry entry for "Legacy lkbdhlpr"
    > >>>>>>> given an error "Cannot remove"
    > >>>>>>> Tried the same thing in safe mode, no change, on reflection, since
    > >>>>>>> it is called for by windows, safe mode would probably still call for
    > >>>>>>> it.

    >
    > >>>>>>> I note that there are 2 kinds of lkbdhlpr file one is .sys the other
    > >>>>>>> is .vxd
    > >>>>>>> All files with lkbdhlpr in the name have been deleted.
    > >>>>>>> Can anyone help please
    > >>>>>>> TIA
    > >>>>>>> Teriel9

    >
    > >>>>>> A google search turned this up.
    > >>>>>> 1) Go into your system BIOS setup.
    > >>>>>> 2) Goto Integrated Peripherals.
    > >>>>>> 3) Change Port 64/60 Emulation to 'Disable'.
    > >>>>>> Save and reboot.
    > >>>>>> --

    >
    > >>>>>> "Don't pick a fight with an old man.
    > >>>>>> If he is too old to fight, he'll just kill you."


    You cannot attach or upload things in this forum. Some other forums
    you can, but not here.

    You can copy/paste information here or you can post screenshots on an
    image hosting site and post the link to the image back here. We don't
    need screenshots right now, but I will tell you how anyway in case you
    need to later.

    The msinfo32 and Event Log information is a copy/paste operation. Use
    the directions provided before and you need to copy/paste your
    information which will look something like this:

    System information:

    OS Name Microsoft Windows XP Professional
    Version 5.1.2600 Service Pack 3 Build 2600
    OS Manufacturer Microsoft Corporation
    System Manufacturer Hewlett-Packard
    System Model Presario V4000
    System Type X86-based PC
    Processor x86 Family 6 Model 13 Stepping 8 GenuineIntel ~1696 Mhz
    BIOS Version/Date Phoenix F.14, 4/27/2006
    SMBIOS Version 2.31
    Windows Directory C:/WINDOWS
    System Directory C:/WINDOWS\system32
    Boot Device \Device\HarddiskVolume1
    Locale United States
    Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.
    080413-2111)"
    Time Zone Eastern Standard Time
    Total Physical Memory 512.00 MB
    Available Physical Memory 220.24 MB
    Total Virtual Memory 2.00 GB
    Available Virtual Memory 1.96 GB
    Page File Space 1.20 GB
    Page File C:/pagefile.sys

    Event Log example:

    Event Type: Information
    Event Source: SecurityCenter
    Event Category: None
    Event ID: 1800
    Date: 3/10/2010
    Time: 9:17:05 AM
    User: N/A
    Description:
    The Windows Security Center Service has started.

    For more information, see Help and Support Center at
    http://go.microsoft.com/fwlink/events.asp.



    To create and email/post/print a screenshot:

    Press the Print Scrn button to copy your entire screen to the Windows
    clipboard.

    Press Alt Print Scrn to copy just the active window to the Windows
    clipboard.

    Open MS Paint:

    Start, Program Accessories, Paint

    When Paint opens, press CTRL-V to paste the clipboard, save the new
    Paint file to your desktop or someplace you can remember. JPG files
    take up less hard disk space than BMP files and just as readable.

    Make as many screenshots as you need. Practice makes perfect. Be
    careful your screenshot does not contain any personal information.
    Practice viewing your images before you upload them to be sure they
    are okay.

    Some sites will let you attach a file directly to your post. If the
    site has some kind of attachment/upload function it is usually easiest
    just to use it.

    If there is no such function in your message board to upload files,
    then use a free third party image hosting WWW site.

    Create a free account on some free picture hosting web site. You can
    always remove your account later if you want. Here are some free
    image hosting sites:

    http://www.imageshack.us/
    http://photobucket.com/

    Using your free account, upload your screenshot(s) (the JPG or BMP
    files) to the site and it will return to you a URL web address (a
    Direct Link) for your new image(s) which you can paste the Direct Link
    in a message post, email, etc.

    Post that Direct Link web address back here in your response and we
    can click on the link address and see your screenshot. Post as many
    as you need - the sites are free.

    When you are done, what you post for others to use should look
    something like this:

    http://img96.imageshack.us/img96/6530/taskmanagerv.jpg
     
  18. Unknown

    Unknown Flightless Bird

    Have you Googled for LKBDHLPR?
    "Teriel9" <terry@teriel-consultants.co.uk> wrote in message
    news:eXMmlnDzKHA.5040@TK2MSFTNGP02.phx.gbl...
    > Hi Michael,
    > I have tried but my search for "lkbdhlpr" revealed nothing.
    > Thanks
    > Teriel9
    >
    >
    > "Michael" <mdsjhu@gropumail.com> wrote in message
    > news:%23v5AANDzKHA.2436@TK2MSFTNGP04.phx.gbl...
    >> Have you contacted Logitech about this? They have forums that are pretty
    >> informative.
    >>
    >> --
    >>
    >>
    >> "Don't pick a fight with an old man.
    >> If he is too old to fight, he'll just kill you."
    >>
    >>
    >> "Teriel9" <terry@teriel-consultants.co.uk> wrote in message
    >> news:ehpL9JDzKHA.5940@TK2MSFTNGP02.phx.gbl...
    >>> Michael
    >>> Regret no
    >>> Teriel9
    >>>
    >>> "Michael" <mdsjhu@gropumail.com> wrote in message
    >>> news:%23BZjMSCzKHA.244@TK2MSFTNGP06.phx.gbl...
    >>>> Did it work?
    >>>>
    >>>> --
    >>>>
    >>>>
    >>>> "Don't pick a fight with an old man.
    >>>> If he is too old to fight, he'll just kill you."
    >>>>
    >>>>
    >>>> "Teriel9" <terry@teriel-consultants.co.uk> wrote in message
    >>>> news:euBnsOBzKHA.5332@TK2MSFTNGP02.phx.gbl...
    >>>>> Yes Micheal Thank you
    >>>>> Teriel9
    >>>>>
    >>>>>
    >>>>> "Michael" <mdsjhu@gropumail.com> wrote in message
    >>>>> news:72FC6604-FCFC-4061-BEF7-991E889A501B@microsoft.com...
    >>>>>> Have you checked 'services' to see if there's an entry there you can
    >>>>>> disable?
    >>>>>>
    >>>>>> --
    >>>>>>
    >>>>>>
    >>>>>> "Don't pick a fight with an old man.
    >>>>>> If he is too old to fight, he'll just kill you."
    >>>>>>
    >>>>>>
    >>>>>> "Teriel9" <terry@teriel-consultants.co.uk> wrote in message
    >>>>>> news:#0V8h$3yKHA.5040@TK2MSFTNGP02.phx.gbl...
    >>>>>>> Thanks Micheal,
    >>>>>>> Tried this but do not have Port60/40 emulation in my Integrated
    >>>>>>> peripherals. at least I could not find it
    >>>>>>> Thanks
    >>>>>>> Teriel9
    >>>>>>>
    >>>>>>>
    >>>>>>> "Michael" <mdsjhu@gropumail.com> wrote in message
    >>>>>>> news:ehsf5G3yKHA.5040@TK2MSFTNGP02.phx.gbl...
    >>>>>>>> Teriel9" <terry@teriel-consultants.co.uk> wrote in message
    >>>>>>>> news:e8nlvv2yKHA.5868@TK2MSFTNGP06.phx.gbl...
    >>>>>>>>> In my Event Viewer an error occurs each time I start up "Cannot
    >>>>>>>>> load file "lkbdhlpr"
    >>>>>>>>> I have tried vaious options to get rid of it
    >>>>>>>>> Removed and Reinstalled Logitech Software
    >>>>>>>>> Changed file suffix to .old
    >>>>>>>>> Located and tried to delete registry entry for "Legacy lkbdhlpr"
    >>>>>>>>> given an error "Cannot remove"
    >>>>>>>>> Tried the same thing in safe mode, no change, on reflection, since
    >>>>>>>>> it is called for by windows, safe mode would probably still call
    >>>>>>>>> for it.
    >>>>>>>>>
    >>>>>>>>> I note that there are 2 kinds of lkbdhlpr file one is .sys the
    >>>>>>>>> other is .vxd
    >>>>>>>>> All files with lkbdhlpr in the name have been deleted.
    >>>>>>>>> Can anyone help please
    >>>>>>>>> TIA
    >>>>>>>>> Teriel9
    >>>>>>>>
    >>>>>>>> A google search turned this up.
    >>>>>>>> 1) Go into your system BIOS setup.
    >>>>>>>> 2) Goto Integrated Peripherals.
    >>>>>>>> 3) Change Port 64/60 Emulation to 'Disable'.
    >>>>>>>> Save and reboot.
    >>>>>>>> --
    >>>>>>>>
    >>>>>>>>
    >>>>>>>> "Don't pick a fight with an old man.
    >>>>>>>> If he is too old to fight, he'll just kill you."
    >>>>>>>>
    >>>>>>>>
    >>>>>>>
    >>>>>>>
    >>>>>
    >>>>>
    >>>
    >>>

    >
    >
     
  19. Michael

    Michael Flightless Bird

    "Jose" <jose_ease@yahoo.com> wrote in message
    news:f79c85be-bf65-4912-be6e-851b0046e178@q15g2000yqj.googlegroups.com...

    <snip>

    > Post that Direct Link web address back here in your response and we
    > can click on the link address and see your screenshot. Post as many
    > as you need - the sites are free.
    >
    > When you are done, what you post for others to use should look
    > something like this:
    >
    > http://img96.imageshack.us/img96/6530/taskmanagerv.jpg


    Why are you replying to me? This isn't a 'forum.' It's a Usenet newsgroup.
    --


    "Don't pick a fight with an old man.
    If he is too old to fight, he'll just kill you."
     

Share This Page