• Welcome to Tux Reports: Where Penguins Fly. We hope you find the topics varied, interesting, and worthy of your time. Please become a member and join in the discussions.

Phone Dialer (AVWAV.DLL)

M

Mammad DN

Flightless Bird
I want to use microsoft phone dialer for making a phone call to another
person but after i dial the intended number and subscriber picks up the
phone the status of phone dialer changes to connected but i don't hear the
subscriber's voice and also they don't hear my voice by microphone that is
connected to the pc.i am using a Zoltrix SoftK56 data fax modem that has
it's audio driver installed so after i make a call by this program i hear
the dial tone from the speakers but after the called person picks up the
phone i don't.what should i do to be able hear the called person's voice and
they hear me too
?
 
T

T Shadow

Flightless Bird
"Mammad DN" <mm_64_hiphop@yahoo.co.uk> wrote in message
news:%23Gp6plg7KHA.3880@TK2MSFTNGP04.phx.gbl...
>I want to use microsoft phone dialer for making a phone call to another
>person but after i dial the intended number and subscriber picks up the
>phone the status of phone dialer changes to connected but i don't hear the
>subscriber's voice and also they don't hear my voice by microphone that is
>connected to the pc.i am using a Zoltrix SoftK56 data fax modem that has
>it's audio driver installed so after i make a call by this program i hear
>the dial tone from the speakers but after the called person picks up the
>phone i don't.what should i do to be able hear the called person's voice
>and they hear me too
> ?



Does the modem support the Voice modem command set?

http://en.wikipedia.org/wiki/Voice_modem_command_set
http://en.wikipedia.org/wiki/Modem#Voice_modem
 
C

Claire

Flightless Bird
"Mammad DN" <mm_64_hiphop@yahoo.co.uk> wrote in message news:%23Gp6plg7KHA.3880@TK2MSFTNGP04.phx.gbl...
>I want to use microsoft phone dialer for making a phone call to another
> person but after i dial the intended number and subscriber picks up the
> phone the status of phone dialer changes to connected but i don't hear the
> subscriber's voice and also they don't hear my voice by microphone that is
> connected to the pc.i am using a Zoltrix SoftK56 data fax modem that has
> it's audio driver installed so after i make a call by this program i hear
> the dial tone from the speakers but after the called person picks up the
> phone i don't.what should i do to be able hear the called person's voice and
> they hear me too
> ?
>
>


If you want to use the headphones instead of phone handset you need to have a full duplex modem.
To read more about it:
What is a Voice Modem?
Half-duplex versus full-duplex modems
How to check that modem has ability to play a wave file?
How to check modem's wave driver.
Speakerphone: how to use it and troubleshoot
Voice modems recommendation
Using the test file to diagnose hardware or software problems
 
D

Doum

Flightless Bird
"Mammad DN" <mm_64_hiphop@yahoo.co.uk> écrivait
news:#Gp6plg7KHA.3880@TK2MSFTNGP04.phx.gbl:

> I want to use microsoft phone dialer for making a phone call to
> another person but after i dial the intended number and subscriber
> picks up the phone the status of phone dialer changes to connected but
> i don't hear the subscriber's voice and also they don't hear my voice
> by microphone that is connected to the pc.i am using a Zoltrix SoftK56
> data fax modem that has it's audio driver installed so after i make a
> call by this program i hear the dial tone from the speakers but after
> the called person picks up the phone i don't.what should i do to be
> able hear the called person's voice and they hear me too
> ?
>
>


Does the modem have speakers and microphone connectors? If so, my guess
would be that speakers and mike need to be plugged in the modem connectors,
not on the PC sound device.

HTH
 
M

Mammad DN

Flightless Bird
no my modem is a data fax modem and it doesn't have a speaker connector it
just have two RJ 11 connectors that are Line and Phone but after i install
it's driver that is included in it's cd i hear the tone dials from my
speakers but after the called person picks up the phone we don't hear
eachother.If u open phone dialer in windows and hover ur mouse on Show Names
With Conference Video option in Phone Menu you'll see that avwav.dll is
corrupt and if it's not please tell me what you see in status bar.Thank you
"Doum" <me@domain.net> wrote in message
news:XnF9D73A258DB294doumdomainnet@207.46.248.16...
> "Mammad DN" <mm_64_hiphop@yahoo.co.uk> crivait
> news:#Gp6plg7KHA.3880@TK2MSFTNGP04.phx.gbl:
>
>> I want to use microsoft phone dialer for making a phone call to
>> another person but after i dial the intended number and subscriber
>> picks up the phone the status of phone dialer changes to connected but
>> i don't hear the subscriber's voice and also they don't hear my voice
>> by microphone that is connected to the pc.i am using a Zoltrix SoftK56
>> data fax modem that has it's audio driver installed so after i make a
>> call by this program i hear the dial tone from the speakers but after
>> the called person picks up the phone i don't.what should i do to be
>> able hear the called person's voice and they hear me too
>> ?
>>
>>

>
> Does the modem have speakers and microphone connectors? If so, my guess
> would be that speakers and mike need to be plugged in the modem
> connectors,
> not on the PC sound device.
>
> HTH
 
Top