• Welcome to Tux Reports: Where Penguins Fly. We hope you find the topics varied, interesting, and worthy of your time. Please become a member and join in the discussions.

CMOS Problem?

L

Linus

Flightless Bird
I am running an eight year old Pentium 4 and multi booting Windows ME and two
local language versions of Windows XP.

Recently, every time I boot ME I see a message that says “Preparing to start
your new computer, this will a few minutes.†Then the system spends 15
minutes loading data, then boots up and works fine.

I suspected the CMOS battery but I was puzzled because both language
versions of XP boot up just fine. I checked the 3volt battery and it only
registered less than one volt, so I replaced it but that didn’t have any
effect on my problem with ME.

Now I suspect that I need to reset the CMOS, but don’t understand how all
three operating systems share it and don’t know what will happen to my XP
systems, or how to reset it just for ME.

Any guidance you can give me will be appreciated.


--
Linusverl
 
E

Elmo

Flightless Bird
Linus wrote:
> I am running an eight year old Pentium 4 and multi booting Windows ME and two
> local language versions of Windows XP.
>
> Recently, every time I boot ME I see a message that says “Preparing to start
> your new computer, this will a few minutes.†Then the system spends 15
> minutes loading data, then boots up and works fine.
>
> I suspected the CMOS battery but I was puzzled because both language
> versions of XP boot up just fine. I checked the 3 volt battery and it
> registered less than one volt, so I replaced it but that didn’thave any
> effect on my problem with ME.
>
> Now I suspect that I need to reset the CMOS, but don’t understand how all
> three operating systems share it and don’t know what will happen to my XP
> systems, or how to reset it just for ME.
>
> Any guidance you can give me will be appreciated.


It's more likely that the settings aren't being remembered, possibly
because the profile is damaged. Run scandisk first to see if that
repairs a damaged file or two. Here are a few search results I found:

From a 2003 post:
http://www.duxcw.com/yabbse/index.php?topic=2145.0

After reading a looong thread with no solution, I suspect that either a
registry file is damaged or missing, or there's a registry entry that
needs to be removed, possibly a Runonce entry. Here's the fruitless
thread, which does show many suggestions to NOT consider:

http://www.tomshardware.com/forum/165870-48-question-reinstalling-hard-drive

A lone post, with no replies, suggested that FDISK /MBR could possibly
solve the problem.
http://www.annoyances.org/exec/forum/winme/1056466154

Much less likely a solution: KellysTweaks suggests the following
registry repair for XP if your settings aren't saved. You could
possibly look through those registry entries on the Win Me install to
see if the entries are there, and whether the values are "1" or "0".

--

Joe =o)
 
T

T Shadow

Flightless Bird
"Linus" <Linusverl@mspamn.com> wrote in message
news:5A3DDCB4-7725-4635-9939-6FDD83826362@microsoft.com...
>I am running an eight year old Pentium 4 and multi booting Windows ME and
>two
> local language versions of Windows XP.
>
> Recently, every time I boot ME I see a message that says "Preparing to
> start
> your new computer, this will a few minutes." Then the system spends 15
> minutes loading data, then boots up and works fine.
>
> I suspected the CMOS battery but I was puzzled because both language
> versions of XP boot up just fine. I checked the 3volt battery and it only
> registered less than one volt, so I replaced it but that didn't have any
> effect on my problem with ME.
>
> Now I suspect that I need to reset the CMOS, but don't understand how all
> three operating systems share it and don't know what will happen to my XP
> systems, or how to reset it just for ME.
>
> Any guidance you can give me will be appreciated.
>
>
> --
> Linusverl


At one volt the battery has probably been dead a long time. The system only
uses it when power isn't received from the power supply. The loss of power
from the supply may have something to do with it but more likely a
coincedence that clouds the situation.

Elmo's scandisk recommendation would be the place to start but after I'd try
to find info on fixing ME. As if it has nothing to do with multi-booting.
Could be that it doesn't start correctly because it(ME) doesn't shut down
correctly. Win9x/ME really have stabiliy issues and are very prone to
problems.
 
Top